Kramer drivers - Top 4 Download

The following changes were made in this version: Added Features: - Output resolutions 1080p29.97 and 1080p30 were added. Firmware upgrade procedure for scalers of VP-4xx series equipped with USB communication port 1. Verify that you have appropriate software upgrade package. 2. Switch VP-4xx scaler (further – device) off by ...

The following changes were made in this version: Fixes: - XGA was incorrectly detected from a Mac source causing flashing on the output. Modifications: - The plug and play ID name in the EDID was changed from KRM to KMR. Firmware upgrade procedure for scalers of VP-4xx series equipped with ...

The following changes were made in this version: Fixes: - From some monitors the scaler did not detect the EDID properly. Firmware upgrade procedure for scalers of VP-4xx series equipped with USB communication port 1. Verify that you have appropriate software upgrade package. 2. Switch VP-4xx scaler (further – device) ...

The following changes were made in this version: Fixes: - When a PT-571 is connected to the scaler, audio does not pass to the output. About Device Firmware: Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems ...

The following changes were made in this version: Added Features: - The ability to define a preferred EDID was added. Fixes: - Analog audio is now present when there is no active video input. - A compatibility issue (H, V sync that caused glitches) with Epson projectors and other screens was ...

The following changes were made in this version: Fixes: - A distorted 1600x1200 picture on some screens was fixed by the new firmware together with a hardware change. Firmware upgrade procedure for scalers of VP-4xx series equipped with USB communication port 1. Verify that you have appropriate software upgrade package. ...

Fixes: - An HDCP snow problem was fixed. Modifications: - The brightness range was changed to 0 to 50 with steps of 5. Firmware upgrade procedure for scalers of VP-4xx series equipped with USB communication port 1. Verify that you have appropriate software upgrade package. 2. Switch VP-4xx scaler (further ...

The following changes were made in this version: Fixes: - Output was flashing with a new MacBook Pro computer as an HDCP source. - When the output was 1920x1200 the aspect ratio was wrong and 16:9 name was changed to Letterbox. - Changing HD color space on the output between YUV ...

The following changes were made in this version: Added Features: - Audio DSP features were added to increase MIC functionality - Added TIMING SHIFT control to Web pages Fixes: - Fixed bug with MacBook exiting sleep mode About Device Firmware: Applying a newer firmware version than the one already installed ...

The following changes were made in this version: Added Features: - Add “#STANDBY” command for P3000 - Add S/N command for P3000 - Add the “device in sleep mode“ message for P3000. Set command when Standby mode is off - Add Panel lock function in Menu and Web page - Reply ...

The following changes were made in this version: Added Features: - Add “#STANDBY” command for P3000 - Add “~01@STANDBY P1 - Off(0)/On(1)” when the user presses the power button on the Web page - Add S/N command for P3000 - Add the “device in sleep mode“ message for P3000. Set command ...

The following changes were made in this version: Added Features: - Two web page options (advanced page) were added: Mutes when video freeze ON/OFF. Mutes when video blank ON/OFF. - Allows the use of the mic even when no video is present. - Support for four Ethernet clients was added. - ...

The following changes were made in this version: Added Features: - Options to blank the video output were added. - Supports audio even if video is not present. Fixes: - A bug in the "Last Connected" feature was fixed. - Now includes front-panel serial port echoing. - P3K is now supported ...

The following changes were made in this version: Added Features: - Talkover feature with OSD modification was added. - MIC GAIN BOOST on/off was added to the OSD menu & Web page. - A VOLUME bar display checkbox was added in the ADVANCED Web page for enabling or disabling the OSD ...

The following changes were made in this version: Added Features: - “PiP” command  1360x768p60 output resolution - Color depth selection to EDID select - PiP button as shortcut to toggle window control when navigating the OSD MENU - Y command – Get PiP key function - Get “win–cust” command - ...

The following changes were made in this version: Fixes: - Scrollbars: Auxiliary Level and Output Volume were out of limits - The OSD menu and WEB scaling were not same when the PC input was chosen - Comma in beginning of string when you choose to write EDID to an input ...

The following changes were made in this version: Added Features: - Balanced audio output follows Output 1 or 2. - Protocol 3000 volume and power commands added. - Front panel echoing added. - Mic gain added to Web page. - Added “ AUDIO OUT” in SID-X2N on Web page - When ...

The following changes were made in this version: Fixes: - Scrollbars: Auxiliary Level and Output Volume were out of limits - The OSD menu and WEB scaling were not same when the PC input was chosen - Comma in beginning of string when you choose to write EDID to an input ...

The following changes were made in this version: Added Features: - Data Routing was added. Fixes: - Bugs were fixed. About Device Firmware: Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and ...

Current Version: F – 1.28 (master), 2.31 (audio) The following changes were made in this version: Fixes: When switching HDMI to an unconnected input, shutting down by the IR remote and connecting a device, there was no audio without cycling power. Added Features: HDCP get status commands were ...

The following changes were made in this version: Fixes: - Error messages were created for large files: "File too big", and for small files: "File too small". - For any input switch command, only one response, the new input, is sent to the RS232/ETHERNET port. - A 15 sec timeout ...

The following changes were made in this version: Added Features: - New resolutions were added to the output resolution list: 720x480p@59.94 1920x1080p@23.98 1280x720p@59.94 1920x1080p@29.97 1920x1080i@59.94 1920x1080p@59.94 - The EDID file is now read from any acceptor (through the HDMI) and stored as a custom output resolution. This allows automatic handling of ...

The following changes were made in this version: Fixes: An issue with some DVD and Blu-ray players (for example Pioneer LX55 Blu-ray player) was fixed: - Powering on the scalers with an LX55 Blu-ray player selected on HDMI 1 gives the normal information screen. Switching to another source on HDMI 2 ...

The following changes were made in this version: Fixes: - When polling commands were sent continuously via RS-232 the audio stopped working and the information menu showed an audio version of 0.0. Technical Notes: - An audio vulnerability was fixed in this version. About Device Firmware: Applying a newer ...

Fixes: - EDID of both VGA and HDMI inputs is upgraded using this procedure EDID upgrade procedure 1. If you are updating a VGA input on the scaler connect this input to VGA output of your PC via non-standard VGA cable as shown above (pins 5, 12 and 15 are ...