Top download

Icom drivers - Top 4 Download

Search Driver:

Register Login

Icom drivers download in Firmware

Icom IC-R9500 Receiver Firmware 1.07 non-USA

Improvements: - The bass audio when receiving AM broadcast in SSB mode has been improved. - The performance of the S-meter display in the shortwave band range is improved when the receive band is switched. - The operation of the band-scope is improved when an external reference device is connected. ...
PriceFREE
Icom IC-R9500 Receiver Firmware 1.07 non-USA downloadDownload

Icom ID-5100A Transceiver Firmware E3

Improvements: - The number of repeater lists, Your Call Sign and GPS memory has been increased. Repeater list: from 1200 (30 groups) to 1500 (50 groups) Your Call Sign: from 200 to 300 GPS memory: from 200 to 300 - Auto Dimmer condition settings are added to keep or cancel the ...
PriceFREE
Icom ID-5100A Transceiver Firmware E3 downloadDownload

Icom IC-PCR1500 Receiver Firmware 2.10

Improvements: - P25 frequency coverage is extended. - The AFC function is improved. NOTE: - Before installing this firmware, you must first delete the previous USB driver on your PC, and then install the latest USB driver. The USB driver is included in the receiver control software. - Version 2.10 ...
PriceFREE
Icom IC-PCR1500 Receiver Firmware 2.10 downloadDownload

Icom ID-5100E Transceiver Firmware E3

Improvements: - The number of repeater lists, Your Call Sign and GPS memory has been increased. Repeater list: from 1200 (30 groups) to 1500 (50 groups) Your Call Sign: from 200 to 300 GPS memory: from 200 to 300 - Auto Dimmer condition settings are added to keep or cancel the ...
PriceFREE
Icom ID-5100E Transceiver Firmware E3 downloadDownload

Icom ID-5100E Transceiver Firmware E2

Improvements: - DV Fast Data is now supported. - The Near Repeater Search function is improved. - Tone squelch (TSQL) is now supported when using FM repeaters in the DR function. - The [TONE] FUNC key is now displayed when using FM repeaters in the DR function. (Only ID-5100E) - A ...
PriceFREE
Icom ID-5100E Transceiver Firmware E2 downloadDownload

Icom ID-31A Transceiver Firmware E1

Major function improvements: - TX Audio quality on the DV mode. - Improved readability on receiving weak RF signal in DV mode. - Canadian version is added. NOTE: - Release E1(CPU 1.02, DSP 1.03) Update: - Optional OPC-2218LU data cable is required. - The firmware update is NOT available ...
PriceFREE
Icom ID-31A Transceiver Firmware E1 downloadDownload

Icom ID-51E PLUS Transceiver Firmware E1

Improvements: - The firmware update improves DSP processing of the DV Fast Data. Update: - An OPC-2350LU or OPC-2218LU is required to install the firmware update. To use the OPC-2218LU for the first time, a USB driver is required. - Never turn OFF the equipment power or disconnect the data ...
PriceFREE
Icom ID-51E PLUS Transceiver Firmware E1 downloadDownload

Icom ID-51A Transceiver Firmware E1

Improvements: - The firmware update improves DSP processing of the DV Fast Data. NOTE: - ID-51A Icom 50th Anniversary Limited Edition Update: - An OPC-2350LU or OPC-2218LU is required to install the firmware update. To use the OPC-2218LU for the first time, a USB driver is required. - Never ...
PriceFREE
Icom ID-51A Transceiver Firmware E1 downloadDownload

Icom ID-51A PLUS Transceiver Firmware E1

Improvements: - The firmware update improves DSP processing of the DV Fast Data. Update: - An OPC-2350LU or OPC-2218LU is required to install the firmware update. To use the OPC-2218LU for the first time, a USB driver is required. - Never turn OFF the equipment power or disconnect the data ...
PriceFREE
Icom ID-51A PLUS Transceiver Firmware E1 downloadDownload

Icom IC-5100A Transceiver Firmware E1

Improvements: - Fixed the problem where the RS-MS1A does not display pictures and text received by the ID-5100 when the SP2 external speaker jack is in use. - Fixed the problem where the D-PRS data in the B band Single watch mode, and/or the right side band Dualwatch mode, may not ...
PriceFREE
Icom IC-5100A Transceiver Firmware E1 downloadDownload

Icom IC-5100A Transceiver Firmware E2

Improvements: - DV Fast Data is now supported. - The Near Repeater Search function is improved. - Tone squelch (TSQL) is now supported when using FM repeaters in the DR function. - The [TONE] FUNC key is now displayed when using FM repeaters in the DR function. (Only ID-5100E) - A ...
PriceFREE
Icom IC-5100A Transceiver Firmware E2 downloadDownload

Icom IC-5100E Transceiver Firmware E2

Improvements: - DV Fast Data is now supported. - The Near Repeater Search function is improved. - Tone squelch (TSQL) is now supported when using FM repeaters in the DR function. - The [TONE] FUNC key is now displayed when using FM repeaters in the DR function. (Only ID-5100E) - A ...
PriceFREE
Icom IC-5100E Transceiver Firmware E2 downloadDownload

Icom IC-9100 Transceiver Firmware E1

Improvements: - Fixed a problem that the sub-band IF filter may be switched to unexpected one when changing the operating mode. - Fixed a problem with the TX and RX switching in the DV mode. To update the firmware - A USB cable is required. (A-B type, purchase separately) - ...
PriceFREE
Icom IC-9100 Transceiver Firmware E1 downloadDownload

Icom IC-7300 Transceiver Firmware 1.12

Improvements: - Audio processing improvement in SSB mode transmission - Minor graphic update To update the firmware - An SD card or an SDHC card is required. - Format the card in the IC-7300 before using it for the update. (First, save any data that is on the card, if ...
PriceFREE
Icom IC-7300 Transceiver Firmware 1.12 downloadDownload

Icom IC-7600 Transceiver Firmware 1.03

Improvements: - Improved an issue that the preset data of Internal Antenna Tuner (ATU) sometimes could not be memorized when turning off the transceiver. NOTE: - The firmware can be updated using an SD card or USB flash drive. - Backup your transceiver's data onto an SD card or USB ...
PriceFREE
Icom IC-7600 Transceiver Firmware 1.03 downloadDownload

Icom IC-7600 Transceiver Firmware 1.11

Improvements: - Additional functions for CI-V commands (ex. CW message) are provided to support the RS-BA1. - A new additional feature, the Time-Out Timer (TOT) function. - Improvement of firmware Ver.1.10. NOTE: - The firmware can be updated using an SD card or USB flash drive. - Backup your transceiver's ...
PriceFREE
Icom IC-7600 Transceiver Firmware 1.11 downloadDownload

Icom IC-7600 Transceiver Firmware 2.00

Improvements: - Waterfall screens, mouse operation, and other additional functions have been added to the spectrum scope. - An APF AF Level setting has been added. - CI-V commands for antenna control, logging software and RIT/DELTA-TX have been added. - TX Delay (HF/50M) settings have been added to adjust the TX ...
PriceFREE
Icom IC-7600 Transceiver Firmware 2.00 downloadDownload

Icom IC-7800 Transceiver Firmware 2.30

Improvements : - Additional functions for CI-V commands (ex. CW message) are provided to support the RS-BA1. - A new additional feature, the Time-Out Timer (TOT) function. NOTE: - The firmware can be updated using an SD card or USB flash drive. - Backup your transceiver's data onto an SD ...
PriceFREE
Icom IC-7800 Transceiver Firmware 2.30 downloadDownload

Icom IC-7800 Transceiver Firmware 3.00

Improvements : - Waterfall screens, mouse operation, and other additional functions on the bandscope have been added. - An audio scope function has been added. - The USB connector now also accepts USB flash drives or a USB mouse. - The Voice Recording function recording time has been increased. - Transmission ...
PriceFREE
Icom IC-7800 Transceiver Firmware 3.00 downloadDownload

Icom IC-7800 Transceiver Firmware 3.01

Improvement  - Improved remote control of the IC-7800, without needing a Base (server) PC. (RS-BA1 version 1.60 or later required.) - Improved to prevent voice skip when a network delay and/or high packet loss occurs. - Improved to prevent voice delay. NOTE: - The firmware can be updated using an ...
PriceFREE
Icom IC-7800 Transceiver Firmware 3.01 downloadDownload

Icom IC-7800 Transceiver Firmware 3.10

Improvements - CI-V commands for antenna control and logging software have been added. - "MOS-FET" is now the default value of “SEND Relay Type.” NOTE: - The firmware can be updated using an SD card or USB flash drive. - Backup your transceiver's data onto an SD card or USB ...
PriceFREE
Icom IC-7800 Transceiver Firmware 3.10 downloadDownload

Icom IC-7850 Transceiver Firmware 1.01

Improvement The firmware update improves DSP processing to reduce the time to output received audio after the transceiver is switched from transmit to receive with the squelch OFF. (Including audio data output to the S/P DIF, LAN and USB connectors.) - The firmware can be updated using an SD card or ...
PriceFREE
Icom IC-7850 Transceiver Firmware 1.01 downloadDownload

Icom IC-7851 Transceiver Firmware 1.10

Improvement: - A Tracking function has been added to change the Main and Sub band frequencies in the same tuning steps at the same time using the Main dial. - A Waterfall Marker Auto-hide function has been added to automatically hide the marker on the Waterfall display 2 seconds after you ...
PriceFREE
Icom IC-7851 Transceiver Firmware 1.10 downloadDownload

Icom IC-7850 Transceiver Firmware 1.11

Improvement: The firmware update improves the transmit audio waveform display on the audio scope. - The firmware can be updated using an SD card or USB flash drive. Thoroughly read Section 17 (UPDATING THE FIRMWARE) of the instruction manual to know what the update requires. - Backup your transceiver’s data onto ...
PriceFREE
Icom IC-7850 Transceiver Firmware 1.11 downloadDownload

Scan Drivers & Download

Popular Drivers Search

firmware  icom  transceiver