Kramer drivers - Top 4 Download

Kramer drivers download in Firmware

Kramer VP-771 Presentation Scaler-Switcher Firmware 13.52.52.24074.23112.P

The following changes were made in this version: Added Features: - Input EDID selections were added: Multiple/Single Modeline. - Two factory reset options were added: Including ETH, Excluding ETH. - Three auto switching modes were added: Off, Scan, Last connected. - Three image shift modes were added: Auto, Semi Auto, Customized. ...

Kramer VP-770 Presentation Scaler-Switcher Firmware 03.26.46.11368.10986.P

The following changes were made in this version: New Features - A built-in remote control emulation Web page was added. - Support was added for the different control commands. - A port tunneling feature that allows communicating commands via ETH and DGKAT ports was added. - Settings of the customized ...

Kramer VP-770 Presentation Scaler-Switcher Firmware 03.35.47.15411.15410.P Beta

The following changes were made in this version: Fixes: - Wrong input source buttons were fixed. - Output resolution 1280x800@60 was fixed. - EAS message layout was fixed. About Device Firmware: Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds ...

Kramer VP-728 Presentation Scaler-Switcher Firmware 2.30

Current Version: F – 1.26H (master), 2.30 (audio) The following changes were made in this version: Fixes: - A problem of missing audio with some DVDs (for example, Pioneer) was fixed. - The accuracy of audio gain was corrected. Now with gain of 0dB, the outputs are equal to the ...

Kramer VP-728 Presentation Scaler-Switcher Firmware 2.31

Current Version: F – 1.28 (master), 2.31 (audio) The following changes were made in this version: Fixes: When switching HDMI to an unconnected input, shutting down by the IR remote and connecting a device, there was no audio without cycling power. Added Features: HDCP get status commands were ...

Kramer VP-727T Presentation Scaler-Switcher Firmware 1.05

Download FW: 1. Use the browse button under step 3 to select the FW HEX file. 2. Click the start button. The progress of the download process is shown at the bottom of the window. The process will be completed within few minutes. 3. Disconnect and Reconnect the power supply cable ...

Kramer VP-729 Presentation Scaler-Switcher Firmware 2.15

Audio Firmware ver. 2.15 1. Fixed bug – after switching inputs the audio volume is incorrect. Firmware ver. 1.15 2. Removed minimum limitation in output custom resolution: now it is possible to create custom resolution down to 1x1. 3. Maximum horizontal size of PIP window is increased to 960 pixels. ...

Kramer VP-729 Presentation Scaler-Switcher Firmware 2.18

The following changes were made in this version: Fixes: - When polling commands were sent continuously via RS-232 the audio stopped working and the information menu showed an audio version of 0.0. About Device Firmware: Applying a newer firmware version than the one already installed on your unit can bring ...

Kramer VP-553xl Presentation Scaler-Switcher Firmware 3.0

The following changes were made in this version: Added Features: - Data Routing was added. Fixes: - Bugs were fixed. About Device Firmware: Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and ...

Kramer VP-553xl Presentation Scaler-Switcher Firmware 1.40

The following changes were made in this version: Added Features: - Balanced audio output follows Output 1 or 2. - Protocol 3000 volume and power commands added. - Front panel echoing added. - Mic gain added to Web page. - Added “ AUDIO OUT” in SID-X2N on Web page - When ...

Kramer VP-729 Presentation Scaler-Switcher Firmware 2.30

Current Version: F – 1.26H (master), 2.30 (audio) The following changes were made in this version: Fixes: - A problem of missing audio with some DVDs (for example, Pioneer) was fixed. - The accuracy of audio gain was corrected. Now with gain of 0dB, the outputs are equal to the ...

Kramer VP-553 Presentation Scaler-Switcher Firmware 1.40

The following changes were made in this version: Added Features: - Balanced audio output follows Output 1 or 2. - Protocol 3000 volume and power commands added. - Front panel echoing added. - Mic gain added to Web page. - Added “ AUDIO OUT” in SID-X2N on Web page - When ...

Kramer VP-553 Presentation Scaler-Switcher Firmware 1.41

The following changes were made in this version: Fixes: - Scrollbars: Auxiliary Level and Output Volume were out of limits - The OSD menu and WEB scaling were not same when the PC input was chosen - Comma in beginning of string when you choose to write EDID to an input ...

Kramer VP-461 Presentation Scaler-Switcher Firmware 24832

The following changes were made in this version: Added Features: - “PiP” command  1360x768p60 output resolution - Color depth selection to EDID select - PiP button as shortcut to toggle window control when navigating the OSD MENU - Y command – Get PiP key function - Get “win–cust” command - ...

Kramer VP-460 Presentation Scaler-Switcher Firmware 24832

The following changes were made in this version: Added Features: - “PiP” command  1360x768p60 output resolution - Color depth selection to EDID select - PiP button as shortcut to toggle window control when navigating the OSD MENU - Y command – Get PiP key function - Get “win–cust” command - ...

Kramer VP-444 Presentation Scaler-Switcher Firmware 1.22 Beta

The following changes were made in this version: Added Features: - Options to blank the video output were added. - Supports audio even if video is not present. Fixes: - A bug in the "Last Connected" feature was fixed. - Now includes front-panel serial port echoing. - P3K is now supported ...

Kramer VP-444 Presentation Scaler-Switcher Firmware 1.29

The following changes were made in this version: New Features: - A timing shift option was added to resolve compatibility issues with some display devices (e.g. Epson). - RS-232 echoing was added. - The PCB version is shown in MENU >> INFO. - The reply to Protocol 3000 commands about IP ...

Kramer VP-444 Presentation Scaler-Switcher Firmware 1.35

The following changes were made in this version: Added Features: - Talkover feature with OSD modification was added. - MIC GAIN BOOST on/off was added to the OSD menu & Web page. - A VOLUME bar display checkbox was added in the ADVANCED Web page for enabling or disabling the OSD ...

Kramer VP-553 Presentation Scaler-Switcher Firmware 3.0

The following changes were made in this version: Added Features: - Data Routing was added. Fixes: - Bugs were fixed. About Device Firmware: Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and ...

Kramer VP-727BA Audio Switcher Firmware 3.24

Connecting the PC to the RS 232 Port: Before installing the latest Kramer firmware version on a VP-727A BA unit, do the following: 1. Connect the RS-232 9-pin D-sub rear panel port. 2. Slide the underside PROGRAM switch to ON. 3. Switch the unit ON. About Device Firmware: Applying a ...

Kramer VP-553xl Presentation Scaler-Switcher Firmware 1.41

The following changes were made in this version: Fixes: - Scrollbars: Auxiliary Level and Output Volume were out of limits - The OSD menu and WEB scaling were not same when the PC input was chosen - Comma in beginning of string when you choose to write EDID to an input ...

Kramer VP-558 Presentation Scaler-Switcher Firmware 1.16

The following changes were made in this version: Added Features: - STEP-IN routing for both SID-X2N and SID-X3N, both video and audio was added. - A power standby button on the Web page was added. ? UDP/TCP multi-client support for up to 4 devices was added. - Added panel lock modes. ...

Kramer VP-426 Video Scaler Firmware 1.98 Beta

The following changes were made in this version: Fixes: - When a PT-571 is connected to the scaler, audio does not pass to the output. About Device Firmware: Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems ...

Kramer VP-426 Video Scaler Firmware 2.03

The following changes were made in this version: Added Features: - The ability to define a preferred EDID was added. Fixes: - Analog audio is now present when there is no active video input. - A compatibility issue (H, V sync that caused glitches) with Epson projectors and other screens was ...

Kramer VP-426 Video Scaler Firmware 2.08

The following changes were made in this version: Fixes: - A distorted 1600x1200 picture on some screens was fixed by the new firmware together with a hardware change. Firmware upgrade procedure for scalers of VP-4xx series equipped with USB communication port 1. Verify that you have appropriate software upgrade package. ...