Voip drivers - Top 4 Download

Voip drivers download

Broadsoft Snom300 IP Phone Firmware 7.1.30

Features:- added Austrian tone scheme - support wild card * Dial Plan match without any rewrite - volume keys change speaker volume in dual-audio mode - do not ask for DHCP server if IP gateway and DNS server are not set (phone may work even if IP gateway ...

Broadsoft Snom300 IP Phone Firmware 7.1.33

Features: - support blind transfer using buttons (using the Buttons programmable key type, single step blind transfer is possible now by just hitting transfer and the appropriate button with action type invite) - dual audio and handsfree support on conference (snom370) (+Spkr to add a secondary audio device during conference ...

Broadsoft Snom300 IP Phone Firmware 7.1.35

Features: - WWW-Contact was no longer being generated Bugfix: - CCNR was broken - in some instances, the wrong line key was selected on incoming calls - TFTP client was not resending ACK when a previously received data packet is received again Installation Instructions:- Right-click on the appropriate ...

Broadsoft Snom300 IP Phone Firmware 7.1.39

Bugfix:- Fixed disabled ringer animation screen. (SCPP-437) - Consistent behaviour locking the keyboard. (SCPP-470) - Fixed showing guessed number (snom370). (SCPP-430) - Missed calls LED handling logic fixed. (SCPP-379) - Send reinvite after aborted transfer as well as the line is "on hold". (SCPP-467) - Fixed ...

Broadsoft Snom300 IP Phone Firmware 7.3.10a

Bugfix: - initial RTP-keep-alive packet was missing, is send out now except MetaSwitch is chosen as SIP server type (SCCP-XXX)  - network for some phones was not working with 7.3 versions, fixed (SCCP-134)  - fixed issue which causes the phone to hang on bootup (SCCP-14) Installation Instructions:- Right-click on the appropriate ...

Broadsoft Snom300 IP Phone Firmware 7.3.14

Features:- Added key_dtmf to initiate key events with dtmf tones remotely via homepage (SCPP-94)  - PC port can be disabled via new eth_pc option off. Bugfix: - Fixed disabled ringer animation screen. (SCPP-437) - Consistent behaviour locking the keyboard. (SCPP-470) - Fixed showing guessed number (snom370). (SCPP-430) ...

Broadsoft Snom300 IP Phone Firmware 7.3.23

Bugfix:- Fixed G.729 distorted audio and one way audio problems (snom3x0). - Don't scroll to next identity if an other than the current identity was removed. (SCPP-816) - Enable changing audio device from speaker to headset in holding state as well (snom300). (SCPP-674) - Clear area of status ...

Broadsoft Snom300 IP Phone Firmware 7.3.26

Bugfix:- Fixed no ringing and no dial tone problem after opening a new call while holding the old one with the function key (in non G.711 codec call). Installation Instructions:- Right-click on the appropriate link for your device and choose Copy shortcut: Open the Web User Interface and navigate to the ...

Broadsoft Snom300 IP Phone Firmware 7.3.30

Bugfix:- Added new setting transfer_on_hangup_with_starcode to allow transferring calls on hangup if one call was picked up with PBX starcode. (SCPP-906)  - Clean paint area for title (snom370). (SCPP-1191) - Codec type and TX-RX stats could not be displayed anymore during call at the display. (SCPP-1206) - Don't handle ...

Broadsoft Snom300 IP Phone Firmware 7.3.4

Features:- duration display for a connected call on (snom370) is hh:mm:ss - show IVR dtmf on display during connected state (snom370) - consistent behavior for incoming calls in menu states - new setting show ivr digits to control digit display while connected (snom360/ 370) - unicode characters ...

Broadsoft Snom300 IP Phone Firmware 7.3.7

Features:- show number of provisioning attempts on the display - added Hebrew national language support for (snom370) and (snom320) as well - character order of Hebrew XML language files has changed (this means older hebrew texts for the Phone User Interface are not compatible to this version and vice ...

Broadsoft Snom320 IP Phone Firmware 7.1.30

Features:- added Austrian tone scheme - support wild card * Dial Plan match without any rewrite - volume keys change speaker volume in dual-audio mode - do not ask for DHCP server if IP gateway and DNS server are not set (phone may work even if IP gateway ...

Broadsoft Snom320 IP Phone Firmware 7.1.33

Features: - support blind transfer using buttons (using the Buttons programmable key type, single step blind transfer is possible now by just hitting transfer and the appropriate button with action type invite) - dual audio and handsfree support on conference (snom370) (+Spkr to add a secondary audio device during conference ...

Broadsoft Snom320 IP Phone Firmware 7.1.39

Bugfix:- Fixed disabled ringer animation screen. (SCPP-437) - Consistent behaviour locking the keyboard. (SCPP-470) - Fixed showing guessed number (snom370). (SCPP-430) - Missed calls LED handling logic fixed. (SCPP-379) - Send reinvite after aborted transfer as well as the line is "on hold". (SCPP-467) - Fixed ...

Broadsoft Snom320 IP Phone Firmware 7.3.10a

Bugfix: - initial RTP-keep-alive packet was missing, is send out now except MetaSwitch is chosen as SIP server type (SCCP-XXX)  - network for some phones was not working with 7.3 versions, fixed (SCCP-134)  - fixed issue which causes the phone to hang on bootup (SCCP-14) Installation Instructions:- Right-click on the appropriate ...

Broadsoft Snom320 IP Phone Firmware 7.3.23

Bugfix:- Fixed G.729 distorted audio and one way audio problems (snom3x0). - Don't scroll to next identity if an other than the current identity was removed. (SCPP-816) - Enable changing audio device from speaker to headset in holding state as well (snom300). (SCPP-674) - Clear area of status ...

Broadsoft Snom320 IP Phone Firmware 7.3.26

Bugfix:- Fixed no ringing and no dial tone problem after opening a new call while holding the old one with the function key (in non G.711 codec call). Installation Instructions:- Right-click on the appropriate link for your device and choose Copy shortcut: Open the Web User Interface and navigate to the ...

Broadsoft Snom320 IP Phone Firmware 7.3.30

Bugfix:- Added new setting transfer_on_hangup_with_starcode to allow transferring calls on hangup if one call was picked up with PBX starcode. (SCPP-906)  - Clean paint area for title (snom370). (SCPP-1191) - Codec type and TX-RX stats could not be displayed anymore during call at the display. (SCPP-1206) - Don't handle ...

Broadsoft Snom320 IP Phone Firmware 7.3.7

Features:- show number of provisioning attempts on the display - added Hebrew national language support for (snom370) and (snom320) as well - character order of Hebrew XML language files has changed (this means older hebrew texts for the Phone User Interface are not compatible to this version and vice ...

Broadsoft Snom320 IP Phone Firmware 8.7.3.25

Release 8.7.3.25 is the certified Broadsoft Release for Snom Desktop 3xx, 7xx and 8xx phones. Please use this version also for Snom Meeting Point and PA-1.Installation Instructions:- Right-click on the appropriate link for your device and choose Copy shortcut: Open the Web User Interface and navigate to the Software Update page ...

Broadsoft Snom360 IP Phone Firmware 7.1.33

Features: - support blind transfer using buttons (using the Buttons programmable key type, single step blind transfer is possible now by just hitting transfer and the appropriate button with action type invite) - dual audio and handsfree support on conference (snom370) (+Spkr to add a secondary audio device during conference ...

Broadsoft Snom360 IP Phone Firmware 7.1.35

Features: - WWW-Contact was no longer being generated Bugfix: - CCNR was broken - in some instances, the wrong line key was selected on incoming calls - TFTP client was not resending ACK when a previously received data packet is received again Installation Instructions:- Right-click on the appropriate ...

Broadsoft Snom360 IP Phone Firmware 7.1.39

Bugfix:- Fixed disabled ringer animation screen. (SCPP-437) - Consistent behaviour locking the keyboard. (SCPP-470) - Fixed showing guessed number (snom370). (SCPP-430) - Missed calls LED handling logic fixed. (SCPP-379) - Send reinvite after aborted transfer as well as the line is "on hold". (SCPP-467) - Fixed ...

Broadsoft Snom360 IP Phone Firmware 7.3.23

Bugfix:- Fixed G.729 distorted audio and one way audio problems (snom3x0). - Don't scroll to next identity if an other than the current identity was removed. (SCPP-816) - Enable changing audio device from speaker to headset in holding state as well (snom300). (SCPP-674) - Clear area of status ...

Broadsoft Snom360 IP Phone Firmware 7.3.30

Bugfix:- Added new setting transfer_on_hangup_with_starcode to allow transferring calls on hangup if one call was picked up with PBX starcode. (SCPP-906)  - Clean paint area for title (snom370). (SCPP-1191) - Codec type and TX-RX stats could not be displayed anymore during call at the display. (SCPP-1206) - Don't handle ...