Broadsoft drivers - Top 4 Download

Broadsoft drivers download in Voip

Broadsoft Snom370 IP Phone Firmware 7.1.35

Features: - WWW-Contact was no longer being generated Bugfix: - CCNR was broken - in some instances, the wrong line key was selected on incoming calls - TFTP client was not resending ACK when a previously received data packet is received again Installation Instructions:- Right-click on the appropriate ...

Broadsoft Snom300 IP Phone Firmware 7.1.35

Features: - WWW-Contact was no longer being generated Bugfix: - CCNR was broken - in some instances, the wrong line key was selected on incoming calls - TFTP client was not resending ACK when a previously received data packet is received again Installation Instructions:- Right-click on the appropriate ...

Broadsoft Snom360 IP Phone Firmware 7.1.35

Features: - WWW-Contact was no longer being generated Bugfix: - CCNR was broken - in some instances, the wrong line key was selected on incoming calls - TFTP client was not resending ACK when a previously received data packet is received again Installation Instructions:- Right-click on the appropriate ...

Broadsoft Snom300 IP Phone Firmware 7.1.30

Features:- added Austrian tone scheme - support wild card * Dial Plan match without any rewrite - volume keys change speaker volume in dual-audio mode - do not ask for DHCP server if IP gateway and DNS server are not set (phone may work even if IP gateway ...

Broadsoft Snom320 IP Phone Firmware 7.1.30

Features:- added Austrian tone scheme - support wild card * Dial Plan match without any rewrite - volume keys change speaker volume in dual-audio mode - do not ask for DHCP server if IP gateway and DNS server are not set (phone may work even if IP gateway ...

Broadsoft Snom360 IP Phone Firmware 7.3.4

Features:- duration display for a connected call on (snom370) is hh:mm:ss - show IVR dtmf on display during connected state (snom370) - consistent behavior for incoming calls in menu states - new setting show ivr digits to control digit display while connected (snom360/ 370) - unicode characters ...

Broadsoft Snom370 IP Phone Firmware 7.3.4

Features:- duration display for a connected call on (snom370) is hh:mm:ss - show IVR dtmf on display during connected state (snom370) - consistent behavior for incoming calls in menu states - new setting show ivr digits to control digit display while connected (snom360/ 370) - unicode characters ...

Broadsoft Snom300 IP Phone Firmware 7.3.4

Features:- duration display for a connected call on (snom370) is hh:mm:ss - show IVR dtmf on display during connected state (snom370) - consistent behavior for incoming calls in menu states - new setting show ivr digits to control digit display while connected (snom360/ 370) - unicode characters ...

Broadsoft Snom370 IP Phone Firmware 7.1.33

Features: - support blind transfer using buttons (using the Buttons programmable key type, single step blind transfer is possible now by just hitting transfer and the appropriate button with action type invite) - dual audio and handsfree support on conference (snom370) (+Spkr to add a secondary audio device during conference ...

Broadsoft Snom360 IP Phone Firmware 7.1.33

Features: - support blind transfer using buttons (using the Buttons programmable key type, single step blind transfer is possible now by just hitting transfer and the appropriate button with action type invite) - dual audio and handsfree support on conference (snom370) (+Spkr to add a secondary audio device during conference ...

Broadsoft Snom320 IP Phone Firmware 7.1.33

Features: - support blind transfer using buttons (using the Buttons programmable key type, single step blind transfer is possible now by just hitting transfer and the appropriate button with action type invite) - dual audio and handsfree support on conference (snom370) (+Spkr to add a secondary audio device during conference ...

Broadsoft Snom300 IP Phone Firmware 7.1.33

Features: - support blind transfer using buttons (using the Buttons programmable key type, single step blind transfer is possible now by just hitting transfer and the appropriate button with action type invite) - dual audio and handsfree support on conference (snom370) (+Spkr to add a secondary audio device during conference ...

Broadsoft Snom300 IP Phone Firmware 7.3.10a

Bugfix: - initial RTP-keep-alive packet was missing, is send out now except MetaSwitch is chosen as SIP server type (SCCP-XXX)  - network for some phones was not working with 7.3 versions, fixed (SCCP-134)  - fixed issue which causes the phone to hang on bootup (SCCP-14) Installation Instructions:- Right-click on the appropriate ...

Broadsoft Snom320 IP Phone Firmware 7.3.10a

Bugfix: - initial RTP-keep-alive packet was missing, is send out now except MetaSwitch is chosen as SIP server type (SCCP-XXX)  - network for some phones was not working with 7.3 versions, fixed (SCCP-134)  - fixed issue which causes the phone to hang on bootup (SCCP-14) Installation Instructions:- Right-click on the appropriate ...

Broadsoft Snom370 IP Phone Firmware 7.1.39

Bugfix:- Fixed disabled ringer animation screen. (SCPP-437) - Consistent behaviour locking the keyboard. (SCPP-470) - Fixed showing guessed number (snom370). (SCPP-430) - Missed calls LED handling logic fixed. (SCPP-379) - Send reinvite after aborted transfer as well as the line is "on hold". (SCPP-467) - Fixed ...

Broadsoft Snom300 IP Phone Firmware 7.1.39

Bugfix:- Fixed disabled ringer animation screen. (SCPP-437) - Consistent behaviour locking the keyboard. (SCPP-470) - Fixed showing guessed number (snom370). (SCPP-430) - Missed calls LED handling logic fixed. (SCPP-379) - Send reinvite after aborted transfer as well as the line is "on hold". (SCPP-467) - Fixed ...

Broadsoft Snom320 IP Phone Firmware 7.1.39

Bugfix:- Fixed disabled ringer animation screen. (SCPP-437) - Consistent behaviour locking the keyboard. (SCPP-470) - Fixed showing guessed number (snom370). (SCPP-430) - Missed calls LED handling logic fixed. (SCPP-379) - Send reinvite after aborted transfer as well as the line is "on hold". (SCPP-467) - Fixed ...

Broadsoft Snom360 IP Phone Firmware 7.1.39

Bugfix:- Fixed disabled ringer animation screen. (SCPP-437) - Consistent behaviour locking the keyboard. (SCPP-470) - Fixed showing guessed number (snom370). (SCPP-430) - Missed calls LED handling logic fixed. (SCPP-379) - Send reinvite after aborted transfer as well as the line is "on hold". (SCPP-467) - Fixed ...

Broadsoft Snom370 IP Phone Firmware 7.3.23

Bugfix:- Fixed G.729 distorted audio and one way audio problems (snom3x0). - Don't scroll to next identity if an other than the current identity was removed. (SCPP-816) - Enable changing audio device from speaker to headset in holding state as well (snom300). (SCPP-674) - Clear area of status ...

Broadsoft Snom300 IP Phone Firmware 7.3.23

Bugfix:- Fixed G.729 distorted audio and one way audio problems (snom3x0). - Don't scroll to next identity if an other than the current identity was removed. (SCPP-816) - Enable changing audio device from speaker to headset in holding state as well (snom300). (SCPP-674) - Clear area of status ...

Broadsoft Snom320 IP Phone Firmware 7.3.23

Bugfix:- Fixed G.729 distorted audio and one way audio problems (snom3x0). - Don't scroll to next identity if an other than the current identity was removed. (SCPP-816) - Enable changing audio device from speaker to headset in holding state as well (snom300). (SCPP-674) - Clear area of status ...

Broadsoft Snom360 IP Phone Firmware 7.3.23

Bugfix:- Fixed G.729 distorted audio and one way audio problems (snom3x0). - Don't scroll to next identity if an other than the current identity was removed. (SCPP-816) - Enable changing audio device from speaker to headset in holding state as well (snom300). (SCPP-674) - Clear area of status ...

Broadsoft Snom370 IP Phone Firmware 7.3.30

Bugfix:- Added new setting transfer_on_hangup_with_starcode to allow transferring calls on hangup if one call was picked up with PBX starcode. (SCPP-906)  - Clean paint area for title (snom370). (SCPP-1191) - Codec type and TX-RX stats could not be displayed anymore during call at the display. (SCPP-1206) - Don't handle ...

Broadsoft Snom320 IP Phone Firmware 7.3.30

Bugfix:- Added new setting transfer_on_hangup_with_starcode to allow transferring calls on hangup if one call was picked up with PBX starcode. (SCPP-906)  - Clean paint area for title (snom370). (SCPP-1191) - Codec type and TX-RX stats could not be displayed anymore during call at the display. (SCPP-1206) - Don't handle ...

Broadsoft Snom360 IP Phone Firmware 7.3.30

Bugfix:- Added new setting transfer_on_hangup_with_starcode to allow transferring calls on hangup if one call was picked up with PBX starcode. (SCPP-906)  - Clean paint area for title (snom370). (SCPP-1191) - Codec type and TX-RX stats could not be displayed anymore during call at the display. (SCPP-1206) - Don't handle ...