- AtomOS 10.4 adds support for the AtomX SYNC module to allow the creation of a wireless RF and Bluetooth network for the synchronization of timecode.
- Connect and remote trigger up to 100 Ninja Vs with AtomX SYNC modules, or GoPros compatible with the Timecode Systems SyncBac Pro product.
- Synchronize timecode with any number of Timecode Systems existing devices at distances on wireless RF up to 200m. Out of range mode allows all devices to default to their internal TCXO to maintain accurate timecode and when back in range will soft sync with the master device once again.
- Pair up to 6 Bluetooth devices, via compatible apps and hardware, up to 15m or extend Bluetooth range with the Ultrasync Blue.
- Jam sync the Ninja V to any existing Timecode source by connecting the input to UltraSync One or add any device with LTC/Genlock/Wordclock to the Ninja V SYNC network by connecting to the UltraSync One
- Auto Calibrate accurate audio offset between HDMI and analogue audio inputs to the Ninja V
- Add Continuous power to allow the hot swap of batteries on the Ninja V
- HDMI inputs with a 4096x2160 resolution are displayed in a 17:9 aspect ratio with top and bottom black letter box
- Download and unzip the file.
- Copy the file onto a recommended, formatted driver, using the docking station included with your recorder.
- Insert the drive into the Atomos recorder while it’s off.
- Power up the Atomos recorder.
- The screen will show flashing lines of color. This is normal - DO NOT power off!
- Updating will take a few minutes.
- Once completed, the Atomos recorder will power down.
- Power up the Atomos recorder again.
- Check Menu > Product Info > AtomOS Version. This should match the version you have just downloaded.
- Enjoy your updated Atomos recorder !
- Power down the Atomos recorder (Hold power button for 4 seconds).
- Hold down the power button for 10 seconds approximately.
- You will see the “Firmware Update Failed” screen.
- Insert your HDD / SSD.
- The install process will begin and the screen will show flashing lines of color. This is normal - DO NOT power off !
- Once completed, the Atomos recorder will power down.
- Enjoy your updated Atomos recorder !
Applying a new firmware package on your Video Recorder adapter should improve overall performance and stability, fix various issues encountered with the device, or add support for newly developed features.
The Video Recorder adapter should be carefully upgraded by a power user (that is to say, someone who has the know-how to successfully complete the process), but it can also be performed by an average user at his or her own risk.
Either way, given the fact that each producer has their own method for installing a new firmware, and that every device has a particular way to enter the update mode, you must not consider upgrading the adapter's software until you have read and thoroughly understood the installation steps.
As a rule, said steps shouldn't pose too much of a challenge because manufacturers strive to make them as easy as possible. As with everything else, exceptions do occur, and users should be prepared for them.
Usually, you should transfer the compatible firmware to the Recorder through a USB cable or a memory card, and afterwards enter update mode from the unit's setup menu or through a specific power-on method.
With this in mind, if you intend to apply this release, make sure the package is compatible with your Video Recorder and that it brings about the changes you want or require; hit the download button and apply the new firmware.
Don't forget to regularly check with our website so that you don't miss any updates.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Top 4 Download periodically updates information of Atomos Ninja V Recorder Firmware 10.4 full driver from the manufacturer, but some information may be slightly out-of-date.
Using warez version of Atomos Ninja V Recorder Firmware 10.4 driver is hazardous. Our driver download links are directly from our mirrors or publisher's website, Atomos Ninja V Recorder Firmware 10.4 torrent files or shared files from free file sharing and free upload services, including Rapidshare, HellShare, HotFile, FileServe, MegaUpload, YouSendIt, MailBigFile, DropSend, MediaMax, zUpload, MyOtherDrive, SendSpace, DepositFiles, Letitbit, LeapFile, DivShare or MediaFire, are not allowed!
It is not recommended to download drivers from illegal sites which distribute a keygens, key generators, pirate keys, serial numbers, warez full versions or cracks for Atomos Ninja V Recorder Firmware 10.4. These drivers might corrupt your computer installation or breach your privacy. A driver might contain a trojan horse opening a backdoor on your computer. Hackers can use this backdoor to take control of your computer, copy data from your computer or to use your computer to distribute viruses and spam to other people.
Download Now
Update All Drivers
