- Fixes the issue where the AP assigns an IP address to wired clients during the Day Zero set up process.
- Fixes the issue where the beacon interval changes to 300 when configuring the fourth SSID.
- Corrects the upload speed in the rate limit help from 1024 Mbps to 1 Mbps.
- Improves performance when navigating from the User Accounts page to the Reboot page.
- This firmware addresses security vulnerabilities.
- Radio buttons don't display during a day zero configuration of the access point. Workaround: The AP dashboard loads later.
- MAC ACL does not work as expected when MAC Randomization is enabled on the wireless clients. Workaround: Disable MAC Randomization on the devices.
- 802.11r-based Fast Roaming fails for Samsung Galaxy S10 clients when connected to a WPA2-Enterprise SSID where Protected Management Frames (PMF) is enabled. Workaround: Disable PMF.
- Instant Captive Portal feature does not work for clients connected to an OWE SSID on a newly on boarded access point. Workaround: Reapply Captive Portal configuration from Insight.
- Issues in the Insight Instant Mesh WiFi can cause the access point to operate on a non-optimum channel. Workaround: Configure the access point to use a static channel.
- Client connectivity and throughput-related interoperability issues can occur with certain Windows, Android, and iOS client OS versions, or when WPA3/WPA2 mixed mode security is enabled on the SSID. Workaround: Upgrade to the latest available Windows/Android/iOS OS version, and update the WiFi client to the latest driver.
- Interoperability issues can occur with certain clients when Band Steering feature is enabled. Workaround: Disable this feature if client interoperability issues are observed.
- Some clients might not show the pop-up login screen when connected to the Instant Captive Portal SSID. Workaround: Launch a web browser and enter the URL for the captive portal authentication page into the browser's address field. For example, open any http web site such as homepage
- Some special characters are not supported in Instant Captive Portal SSIDs. Workaround: We recommend against using special characters in the SSID name.
- While using the Facebook Wi-Fi feature, some iOS devices and Android devices might not display the Facebook Authentication page automatically. Workaround: The user can launch a web browser to display the Facebook Authentication page.
- After updating to a newer firmware version, the local browser interface might not show the latest changes. Workaround: Clear the web browser cache.
- WPA3 personal/WPA3 enterprise does not work with iPad mini. Workaround: Configure the security as WPA3 Personal Mixed (WPA3+WPA2) Security.
If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.
Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it's anything but that.
It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.
With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don't miss a single new release.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Top 4 Download periodically updates information of NETGEAR WAC510 Access Point Firmware 9.5.2.4 full driver from the manufacturer, but some information may be slightly out-of-date.
Using warez version of NETGEAR WAC510 Access Point Firmware 9.5.2.4 driver is hazardous. Our driver download links are directly from our mirrors or publisher's website, NETGEAR WAC510 Access Point Firmware 9.5.2.4 torrent files or shared files from free file sharing and free upload services, including Rapidshare, HellShare, HotFile, FileServe, MegaUpload, YouSendIt, MailBigFile, DropSend, MediaMax, zUpload, MyOtherDrive, SendSpace, DepositFiles, Letitbit, LeapFile, DivShare or MediaFire, are not allowed!
It is not recommended to download drivers from illegal sites which distribute a keygens, key generators, pirate keys, serial numbers, warez full versions or cracks for NETGEAR WAC510 Access Point Firmware 9.5.2.4. These drivers might corrupt your computer installation or breach your privacy. A driver might contain a trojan horse opening a backdoor on your computer. Hackers can use this backdoor to take control of your computer, copy data from your computer or to use your computer to distribute viruses and spam to other people.