Drone / Helicopter / Multicopter / Controller drivers - Top 4 Download

Drone / Helicopter / Multicopter / Controller drivers download

Parrot Mambo Drone Firmware 2.6.6

Reason for new version: - Bug fixes CONNECTING TO THE PARROT MAMBO 1. Insert the battery in the slot provided for this purpose or press the On/Off button. - The Parrot Mambo turns on. 2. Place the Parrot Mambo on a flat surface with the propellers up. 3. Wait until ...

Parrot SkyController Firmware 1.7.4

Improvements: - WPA Support - Bugs fixes Software Update Process: - Connect your USB flash drive to a computer. Make sure that your USB flash drive is formatted to FAT32 and not NTFS and that it has no other plf file. The procedure to format a USB flash drive ...

Parrot Bebop 2 Drone Firmware 4.0.5

Fixed issues - Minor flight improvements - Correction of wrong drone behavior when battery switches to critical state during take-off - Fixes rare take-off failures of successive take-offs at different altitudes To update your Bebop 2 via USB, use: - a micro-USB flash drive (not supplied) - or a ...

Parrot Bebop Drone Firmware 4.0.5

To update your Bebop 2 via USB, use: - a micro-USB flash drive (not supplied) - or a USB flash drive with a female USB/micro-USB cable (not supplied) 1. Connect your USB flash drive to a computer. Make sure that your USB flash drive is formatted to FAT32 and not ...

Parrot Sequoia Drone Sensor Firmware 1.1.1

UPDATING SEQUOIA There are two ways to update Sequoia. Via USB To update Sequoia via USB you must use a micro USB OTG cable male plug with a USB female socket (Diagram H). - Connect your USB drive to a computer and make sure that it contains no ...

YUNEEC ST24 Transmitter Firmware 01.01.b95

Fixes: - Added Manual Video Mode NOTE: - Please ensure your st24 is on version b85 or above before applying this update ST24 Firmware Update: STEP 1: Connect the ST24 to your PC with a micro USB cable. STEP 2: Power on the ST24. Wait until you can see ...

Walkera DEVO-F12 Transmitter Firmware 1.6B

Specifications : - Encoder: 12-channel micro computer system - Frequency: 2.4GHz DSSS - Output power: ≤100mW - Output pulse: 1000-2000Us(1500Us Neutral) - Power supply: LiPo 7.4V/11.1V 1600-3000mAh or 5# Battery 8x1.5V - Current drain: Close the video≤300 Ma(100mW);View the video≤430mH(100mW) REMARKS: - Feel safe to use DEVO-F12E New Updated software(V1.5A/B ...

Walkera DEVO-F12 Transmitter Firmware 1.6A

Specifications: - Encoder: 12-channel micro computer system - Frequency: 2.4GHz DSSS - Output power: ≤100mW - Output pulse: 1000-2000Us(1500Us Neutral) - Power supply: LiPo 7.4V/11.1V 1600-3000mAh or 5# Battery 8x1.5V - Current drain: Close the video≤300 Ma(100mW);View the video≤430mH(100mW) REMARKS: - Feel safe to use DEVO-F12E New Updated software(V1.5A/B and ...

DJI Matrice 100 Drone Firmware Zenmuse X3 1.2.0.80

How to Upgrade the Firmware Upgrading the Aircraft and Battery Firmware If you are using the DJI Zenmuse X3 or X5 Series gimbal and camera: Step 1 - Check the battery level and Micro SD card storage - Make sure the Intelligent Flight Battery has at least a 50% charge. - ...

DJI Matrice 100 Drone Firmware Zenmuse X5 1.2.0.80

How to Upgrade the Firmware Upgrading the Aircraft and Battery Firmware If you are using the DJI Zenmuse X3 or X5 Series gimbal and camera: Step 1 - Check the battery level and Micro SD card storage - Make sure the Intelligent Flight Battery has at least a 50% charge. - ...

Walkera DEVO-F12 Transmitter Firmware 1.5B

Specifications: - Encoder: 12-channel micro computer system - Frequency: 2.4GHz DSSS - Output power: ≤100mW - Output pulse: 1000-2000Us(1500Us Neutral) - Power supply: LiPo 7.4V/11.1V 1600-3000mAh or 5# Battery 8x1.5V - Current drain: Close the video≤300 Ma(100mW);View the video≤430mH(100mW) REMARKS: - Feel safe to use DEVO-F12E New Updated software(V1.5A/B and ...

Walkera DEVO-F12 Transmitter Firmware 1.5A

Specifications: - Encoder: 12-channel micro computer system - Frequency: 2.4GHz DSSS - Output power: ≤100mW - Output pulse: 1000-2000Us(1500Us Neutral) - Power supply: LiPo 7.4V/11.1V 1600-3000mAh or 5# Battery 8x1.5V - Current drain: Close the video≤300 Ma(100mW);View the video≤430mH(100mW) REMARKS: - Feel safe to use DEVO-F12E New Updated software(V1.5A/B and V1.6A/B) ...

Xiro XPLORER V Gimbal Firmware 1.0.0_150519(V)

Fixes: - Reduce the rotational speed of the pitch of the Gimbal Upgrade of the XPLORER Gimbal: 1.  Download the files of “UG3300_PTZ_FW_1.0.0_xxxxxx.bin" 2. Open the folder of “XIROAssistant” 3. One end of the USB data wire plugs into the Micro-USB port  of the drone; (Note: Carefully plug-in); 4. The ...

Xiro XPLORER V Gimbal Firmware 1.0.0_20150521

Upgrade of the XPLORER Gimbal: 1.  Download the files of “UG3300_PTZ_FW_1.0.0_xxxxxx.bin" 2. Open the folder of “XIROAssistant” 3. One end of the USB data wire plugs into the Micro-USB port  of the drone; (Note: Carefully plug-in); 4. The other end of it plugs into a USB port of the PC; 5. ...

DJI Inspire 1 Professional Drone Firmware 1.08.01.00

Notes: - Users are advised to update all Intelligent Flight Batteries with this All-in-One firmware. Upgrade: - Ensure your Micro SD card is inserted into the gimbal and has at least 100 MB of free space. Do not remove the Micro SD card from the gimbal during the firmware update. ...

DJI Matrice 100 Camera Firmware 1.0.01.01

What’s New Firmware: - Improved SDK data transmission stability. - Improved gimbal control accuracy. - Fixed issue of occasional over-discharge when the Intelligent Flight Battery has not been used for more than 90 days. Notes - DJI Assistant 2 must be upgraded to the latest version. - Both the ...

DJI Matrice 100 Drone Firmware Zenmuse X3 1.3.1.00

What’s New Firmware: - Improved SDK data transmission stability. - Improved gimbal control accuracy. - Fixed issue of occasional over-discharge when the Intelligent Flight Battery has not been used for more than 90 days. Notes - DJI Assistant 2 must be upgraded to the latest version. - Both the ...

DJI Matrice 100 Drone Firmware Zenmuse X5 1.3.1.00

What’s New Firmware: - Improved SDK data transmission stability. - Improved gimbal control accuracy. - Fixed issue of occasional over-discharge when the Intelligent Flight Battery has not been used for more than 90 days. Notes - DJI Assistant 2 must be upgraded to the latest version. - Both the aircraft ...

DJI Phantom 3 Standard Drone Firmware 1.08.0080

Notes: - Users are advised to update all Intelligent Flight Batteries with this All-in-One firmware. Upgrade: - Ensure your Micro SD card is inserted into the gimbal and has at least 100 MB of free space. Do not remove the Micro SD card from the gimbal during the firmware update. ...

DJI Phantom 3 Advanced Drone Firmware 1.08.0080

Notes: - Users are advised to update all Intelligent Flight Batteries with this All-in-One firmware. Upgrade: - Ensure your Micro SD card is inserted into the gimbal and has at least 100 MB of free space. Do not remove the Micro SD card from the gimbal during the firmware update. ...

DJI Inspire 1 Drone Firmware 1.08.01.00

Notes:  - Users are advised to update all Intelligent Flight Batteries with this All-in-One firmware. Upgrade: - Ensure your Micro SD card is inserted into the gimbal and has at least 100 MB of free space. Do not remove the Micro SD card from the gimbal during the firmware update. ...

Walkera F210 Drone Firmware OSD_2016.3.29

Remarks of Process: 1) A Walkera upgrade tool UP02 is a must if you upgrade the OSD. 2) To use The cleanflight to upgrade your flight controller (USB wire is a must) 3) You’re unable to just upgrade OSD alone, along with flight controller upgrading is a must. Upgrade the flight ...

DJI Phantom 3 Professional Drone Firmware 1.03.0020

Notes : - Users are advised to update all Intelligent Flight Batteries with this All-in-One firmware. Upgrade: - Ensure your Micro SD card is inserted into the gimbal and has at least 100 MB of free space. Do not remove the Micro SD card from the gimbal during the firmware ...

ArduCopter APM 1.0 Firmware 3.2.1

The following firmware is “special” in that it represents some significant milestone - e.g. “the last version of a build for a particular autopilot”. ArduCopter v3.2.1 firmware for APM 1.0. This is the last build of ArduCopter that still fits on the APM 1.0 boards. Install firmware - On the homepage’s ...

ArduCopter APM 2.0 Firmware 3.2.1

The following firmware is “special” in that it represents some significant milestone - e.g. “the last version of a build for a particular autopilot”. ArduCopter v3.2.1 firmware for APM 2.x. This is the last build of ArduCopter that still fits on the APM 2.x boards. Install firmware - On the homepage’s ...