Yamaha RMio64-D Interface Firmware 3.11

Fixes:

- Solved a problem in which the CL, QL or R Remote would not be able to find the RMio64-D when IGMP Snooping of the network switch was on.
- Solved a problem in which the MADI Output Frame could not be set to 96 kHz when only the MADI OUTPUT was connected and the MADI INPUT was not connected.

Improvements:

- Improved the response speed of the device when the INPUT RATE 1Fs/ 2Fs/ 4Fs is switched by the button on the front panel while the SRC is working.
- Improved the response speed of the device when the WORD CLOCK SOURCE is switched quickly from the CL, QL, or R Remote.

Important notice:

- Before you start updating the firmware, decompress the downloaded compressed
file.
- Place the following files in the same folder:
a) Windows: “RMio64-D_firmXXX.prg” and “RMio64-D Update Program.exe”
b) Mac: “RMio64-D_firmXXX.prg” and “RMio64-D Update Program”
- The characters “XXX” represent the firmware version number which will be
updated.

Installation steps:

1. Connect the computer to the network which RMio64-D is connected.
2. Turn on the power of all RMio64-D devices which are to be updated.
3. Quit the NUAGE Workgroup Manager f if it is running. It is necessary to quit the NUAGE Workgroup manager beforehand since the RMio64-D Update Program cannot be launched while NUAGE Workgroup Manager is running.
- Windows: Right-click the NUAGE Workgroup Manager icon in the system tray and select Quit.
- Mac: Click the NUAGE Workgroup Manager icon in the menu bar and select Quit.
4. Double click “RMio64-D Update Program.” The RMio64-D Update Program will start up.
- The “User Account Control” dialog box may appear. Click [Continue] or [Yes].
- RMio64-D Update Program may be blocked by the Windows Firewall. Check the all check boxes, and click [Allow access].
- In Mac, the confirmation dialog box which accepts incoming network connections from an application may appear. Click [Allow].
5. Make sure that the fields in the “File” section indicate as follows:
- File name: RMio64-D_firmXXX.prg
- Product name: RMio64-D
- Version: X.XX
- The characters “XXX” and “X.XX” represent the firmware version number which will be updated.
- If these fields are empty, click [Select], and select the “RMio64-D_firmXXX.prg.”
6. Select the target RMio64- - D for updating in “Product name” in the “Connect and Update” field.
- If this field is empty, your computer may not be properly connected to the RMio64-D. Make sure that the cable is not disconnected or damaged, and that the program is not blocked by a firewall.
- Each RMio64-D that is operating in NUAGE system is displayed in gray. To update the RMio64-D, check NUAGE Workgroup Manager running on another computer, and remove the RMio64-D from the Workgroup.
7. Click [Update]. The progress log and progress bar are displayed on the lower area in “Connect and Update.”
8. An “Updated successfully” message will be displayed once update is completed, and the RMio64-D restarts automatically.

About Firmware Update:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.