- Add MAC-based VLANs, the feature allow incoming untagged packets to be assigned to a VLAN based on the source MAC address of the packet. This type of VLAN is useful when a host might not always connect to the network through the same port but needs to be on the same VLAN. This can be done in the Web UI "Switching > MAC Based VLAN > Status" page or using the CLI.
- [System] rx errors count.
- [DHCP client] add hostname in dhcp request.
- [Dot1x] automatic VLAN assign in mac-based mode with MAB.
- [SNMP mib] remove PBR mibs support.
- [hostname] host name can't be shown after configuration on 1.6.
- [ubnt discovery] Fix firmware version string reported by discover protocol.
- [DHCP6 client] avoid config change due to dhcpv6 server has option 42.
- [DHCP snooping] avoid config change when dynamic client update in dhcp snooping.
- [System] avoid the incorrect temp value when temp sensor report 367 degree.
- [LAG] Port speed setting for LAG member ports is not preserved.
- [Web UI] Edit DNS server print some "invalid FamilyType" debug messages.
- [Web UI] Inconsistent "Current Active" firmware in GUI.
- [Web UI] VLAN Wizard overwrites tagged/untagged ports when adding range over existing VLAN.
- [Web UI] make a simplified config page for add a pool in dhcp server.
Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.
Usually the update procedure isn’t much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn’t either newer or matching this release.
Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.
It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don’t interrupt the upgrade in any way, because this might cause the switch to malfunction.
That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.
Top 4 Download periodically updates information of Ubiquiti EdgePoint EP-S16 Switch Firmware 1.7.0 full driver from the manufacturer, but some information may be slightly out-of-date.
Using warez version of Ubiquiti EdgePoint EP-S16 Switch Firmware 1.7.0 driver is hazardous. Our driver download links are directly from our mirrors or publisher's website, Ubiquiti EdgePoint EP-S16 Switch Firmware 1.7.0 torrent files or shared files from free file sharing and free upload services, including Rapidshare, HellShare, HotFile, FileServe, MegaUpload, YouSendIt, MailBigFile, DropSend, MediaMax, zUpload, MyOtherDrive, SendSpace, DepositFiles, Letitbit, LeapFile, DivShare or MediaFire, are not allowed!
It is not recommended to download drivers from illegal sites which distribute a keygens, key generators, pirate keys, serial numbers, warez full versions or cracks for Ubiquiti EdgePoint EP-S16 Switch Firmware 1.7.0. These drivers might corrupt your computer installation or breach your privacy. A driver might contain a trojan horse opening a backdoor on your computer. Hackers can use this backdoor to take control of your computer, copy data from your computer or to use your computer to distribute viruses and spam to other people.
Download Now
Update All Drivers