- It introduces compatibility with the “focus ring control” function of the camera, allowing either “linear” or “non-linear” focus movement to be selected when using MF.
- It improves the phenomenon of an occasional, slightly increased shutter lag during AF shooting when used in combination with the Leica SL2.
- Please ensure that the firmware of the camera body is updated to the latest version.
- Use a fully charged battery or connect the camera to the AC adapter.
- Do not disconnect the battery or the AC adapter during the firmware update of the lens.
- Ensure the power of the camera is always kept ON during the firmware update of the lens.
- The lens needs to be attached to a camera to update the firmware.
- Prepare SD/SDHC/SDXC card and format in camera.
- Insert the SD/SDHC/SDXC card with the firmware to the camera and turn on the power.
- Press the MENU button on the back side of the camera body and open the setup menu.
- Select “Update Firmware” and select “OK”.
- After selecting the OK button, “Camera” and “Lens” appears on the display. Please select “Lens”.
- The message “Start firmware update?” will appear on the display.
- Select “Yes” to start the firmware update. Shortly the update will start.
- 「When “Firmware update is complete. It will restart automatically” is displayed, the update is complete.
- Check the “Information” version in the setup menu and confirm the lens version is updated.
Upgrading or downgrading your lens to a different firmware version might enhance the unit's overall performance and stability, and could also improve some of the lenses' features (a good example would be faster autofocus speed).
In order to apply a firmware properly, other than the one already installed, you should check that the lenses are connected to the camera body, copy the compatible update on a memory card, and insert it into the camera.
From the device's menu, browse to the Firmware Upgrade section, and enable the new firmware. Since each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, you must make sure that you read the product's installation guide.
Therefore, if you consider installing this present release, click on the download button to get the firmware, and apply it. Moreover, don't forget to check our website constantly so that you don't miss any of the future versions.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Top 4 Download periodically updates information of SIGMA 24mm F3.5 DG DN Lens Firmware 1.2 full driver from the manufacturer, but some information may be slightly out-of-date.
Using warez version of SIGMA 24mm F3.5 DG DN Lens Firmware 1.2 driver is hazardous. Our driver download links are directly from our mirrors or publisher's website, SIGMA 24mm F3.5 DG DN Lens Firmware 1.2 torrent files or shared files from free file sharing and free upload services, including Rapidshare, HellShare, HotFile, FileServe, MegaUpload, YouSendIt, MailBigFile, DropSend, MediaMax, zUpload, MyOtherDrive, SendSpace, DepositFiles, Letitbit, LeapFile, DivShare or MediaFire, are not allowed!
It is not recommended to download drivers from illegal sites which distribute a keygens, key generators, pirate keys, serial numbers, warez full versions or cracks for SIGMA 24mm F3.5 DG DN Lens Firmware 1.2. These drivers might corrupt your computer installation or breach your privacy. A driver might contain a trojan horse opening a backdoor on your computer. Hackers can use this backdoor to take control of your computer, copy data from your computer or to use your computer to distribute viruses and spam to other people.
Download Now
Update All Drivers