Peplink Pepwave MAX HD2 HW3 Router Firmware 8.1.2

Peplink Pepwave MAX HD2 HW3 Router Firmware 8.1.2

Peplink Pepwave MAX HD2 HW3 Router Firmware 8.1.2 Download Summary

  • File size: 33.30 MB
  • Platform: OS Independent
  • Price: FREE DOWNLOAD
  • Downloads: 112
  • Released: May 14, 2021
  • Manufacturer URL: Peplink

Peplink Pepwave MAX HD2 HW3 Router Firmware 8.1.2

Improvements:

- [5G] Added: 5G band and signal information. (For Transit 5G, a special firmware will be released after GA to include this feature)
- [5G] Cellular "Auto mode" supports 5G and 4G only
Compatible with Balance: 310 5G
Compatible with X Series: EPX, MBX, SDX Pro,SDX, 310X

- [B20X] Added HA support with a valid PrimeCare subscription
Compatible with X Series: 20X

- [Cellular] Data Roaming option will be turned on by default for UScellular SIM
Compatible with Balance: 30 LTE/Pro
Compatible with MAX: BR1/2, HD2/4, Transit
Compatible with UBR: UBR LTE
Compatible with MediaFast: HD2/HD4
Compatible with X Series: All

- [Device API] Added: config.wan.connection added: PPPoE_Obj > managementNetwork SIM_Obj > authentication status.wan.connection added: RAT_Obj
- [System] Added support for Service Provider Configuration via DHCP Option
Compatible with All Models

- [DHCP WAN] Added: Management IP Address for DHCP WAN
Compatible with All Models (Except FusionHub)

- [USB Modem] Updated "Modem Support Version" to 1025
Compatible with Balance: All
Compatible with MAX: BR1 ENT, HD2/4 Indoor Series
Compatible with MediaFast: All
Compatible with X Series: All
Compatible with Surf SOHO

Resolved Issues

- [B20X] Fixed a memory usage issue that causes system instability
Compatible with X Series: 20X

- [B380X / 580X] Fixed an issue causing the WAN Real-Time Bandwidth on InControl 2 to always show 0 bps
- [B380X / 580X] Fixed the issue causing VLAN Access Ports to not work on LAN ports 1-3
Compatible with X Series: 380X, 580X

- [B50] Fixed the issue causing WAN 5 to not function
Compatible with Balance: 50

- [Captive Portal] Updated the Captive Portal SSL Certificate
- [Cellular | USB] Fixed an issue potentially caused high memory usage when cellular is not in use
- [Outbound Policy] Fixed: Adding a new Enforced Outbound Policy does not reroute existing sessions
- [SpeedFusion Cloud] Fixed the issue where "Connect Clients to Cloud" / "Link Wi-Fi to Cloud" / "Optimize Cloud Application" does not work if using Automatic location
Compatible with All Models (Except FusionHub)

- [Cellular & LTE-US-T / LTE-US-T-M] Fixed: Unable to obtain APN and Unable to switch network when Network Mode is set to Auto
Compatible with MAX: BR1 Mini/Mini Core

- [DDNS] Fixed the issue where the user cannot disable the "Update All Hosts" feature when using the "DNS-O-Matic" DDNS service
- [SNMP] Fixed the issue causing the "SNMP CPU Load"to not align with "Web Admin"'s "CPU Load"
- [System] "Firewall > Allow Access Rules" with "Remote Syslog" is now sending with Severity "Notice" instead of "Alert"
- [System] Fixed an issue causing feature Add-on keys might not be fully applied to the devices
Compatible with All Models

- [Flex Module & FlexModule Mini] Fixed an issue that potentially caused incorrect Daily Usage Reports
Compatible with X Series: EPX, SDX Pro, SDX, 580X, 380X, 20X

- [IP Passthrough] Fixed an issue causing IP Passthrough to not work after a firmware upgrade
Compatible with Balance: 30 Pro
Compatible with MAX: BR1, Transit
Compatible with UBR: UBR LTE
Compatible with Surf SOHO: SOHO HW2 / MK3
Compatible with X Series: 20X

- [KVM] Fixed the issue disabling VM creation via network
Compatible with MediaFast: 500, 750
Compatible with X Series: SDX Pro

- [LDAP] Fixed the issue where Remote User Access with LDAP authentication does not work with a Windows Server
- [LDAP] Fixed the LDAP authentication issue when using DUO MFA
Compatible with Balance: 210 or above
Compatible with MAX: 700, HD2/4
Compatible with MediaFast: All
Compatible with X Series: All
Compatible with FusionHub

- [MBX] Fixed: Old MBX hardware revision does not support new MBX expansion module
Compatible with X Series: MBX

- [Remote User Access & FusionHub] Fixed the issue where Authenticate with Active Directory will fail if the Server Name is unable to resolve
Compatible with FusionHub

- [SpeedFusion] Added an option to ignore the DF bit of packets
- [SpeedFusion] Fixed a potential memory issue caused by the device having a lot of SpeedFusion profiles
- [SpeedFusion] Removed duplicated SpeedFusion Event Log entries
Compatible with Balance: B210 or above
Compatible with MAX: 700, HD2/4, Transit
Compatible with UBR: UBR LTE
Compatible with MediaFast: All
Compatible with SFE
Compatible with X Series: EPX, SDX Pro, SDX, PDX, MBX, 310X
Compatible with FusionHub

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Peplink Pepwave MAX HD2 HW3 Router Firmware 8.1.2 Bookmark

Hyperlink code:
Hyperlink for Forum code:

Peplink Pepwave MAX HD2 HW3 Router Firmware 8.1.2 Drivers Download Notice

Top 4 Download periodically updates information of Peplink Pepwave MAX HD2 HW3 Router Firmware 8.1.2 full driver from the manufacturer, but some information may be slightly out-of-date.

Using warez version of Peplink Pepwave MAX HD2 HW3 Router Firmware 8.1.2 driver is hazardous. Our driver download links are directly from our mirrors or publisher's website, Peplink Pepwave MAX HD2 HW3 Router Firmware 8.1.2 torrent files or shared files from free file sharing and free upload services, including Rapidshare, HellShare, HotFile, FileServe, MegaUpload, YouSendIt, MailBigFile, DropSend, MediaMax, zUpload, MyOtherDrive, SendSpace, DepositFiles, Letitbit, LeapFile, DivShare or MediaFire, are not allowed!

It is not recommended to download drivers from illegal sites which distribute a keygens, key generators, pirate keys, serial numbers, warez full versions or cracks for Peplink Pepwave MAX HD2 HW3 Router Firmware 8.1.2. These drivers might corrupt your computer installation or breach your privacy. A driver might contain a trojan horse opening a backdoor on your computer. Hackers can use this backdoor to take control of your computer, copy data from your computer or to use your computer to distribute viruses and spam to other people.

Peplink Pepwave MAX HD2 HW3 Router Firmware 8.2.0

... visit the web admin of client devices behind Peplink/Pepwave routers. Note: web-based InTouch traffic is counted as SpeedFusion ... Compatible with Balance: 210 or above Compatible with MAX: 700, HD2/4, Transit Compatible with UBR: UBR LTE Compatible with ... HW4 or above, 305/380 or above Compatible with MAX: BR1 ENT, Transit, 700 HW3 or above, HD2 ...

Peplink Pepwave MAX HD2 HW3 Router Firmware 7.0.0

Important Notices: For Firmware 7.0.1 - PepVPN Route Isolation is Not Backwards ... in the network to 7.0.1 or 6.3.4. For Firmware 7 - PepVPN Firmware Compatibility Change​: Devices running Firmware 7 will only form PepVPN connections with devices running Firmware 6.1 or later. Firmware 6.0 or earlier is deprecated. - Firmware Downgrade ...

Peplink Pepwave MAX HD2 HW3 Router Firmware 8.1.1

... Compatible with Balance: 30 Pro, One Compatible with MAX: BR1 MK2, Transit, 700 HW3 or above, HD2 HW5 or above, HD4 Compatible with MediaFast: 200, HD2/4 Compatible with X Series: PDX, MBX, 20X Compatible ... - [AP Controller] Added ability to "Set Firmware" directly in "AP > Controller Status > Access ...

Peplink Pepwave MAX HD2 HW3 Router Firmware 8.2.1

... [SpeedFusion Connect] Added an option to disable the Peplink Relay latency checking - [SpeedFusion Connect] Renamed SpeedFusion ... configuration might be restored to factory default after firmware upgrade - [B20X] Fixed WINS Server did not ... might be limited to 20Mbps occasionally Compatible with MAX: 700, BR1/2, HD2/4, Transit (Exclude: BR1 ENT, HD2 ...

Peplink Pepwave MAX HD2 HW3 Router Firmware 8.0.0

... Compatible with Balance: 210 or above Compatible with MAX: 700, HD2/4 Series Compatible with MediaFast: All Compatible with EPX ... algorithms to BR1 Series and Transit. Compatible with MAX: BR1 Series, Transit - [AP Controller] AP ... custom value. Compatible with Balance: ALL Compatible with MAX: 700, Transit, HD2/4 Series Compatible with MediaFast: All ...