Peplink Balance 20X HW2 Router Firmware 8.4.0

New Features:

- [Starlink] Added Starlink support in the WAN Settings page, enabling the device to detect and query the Starlink status, and providing the ability to control the Starlink connection from within InControl2
Compatible with Balance: 310X, 380X, 580X, 310 5G/Fiber 5G, 305/380 or above
Compatible with MAX: BR1 Pro 5G, BR1 Pro HW7, BR2 Pro, Transit 5G, HD1 Dome/Dome Pro, HD2/4 MBX
Compatible with MediaFast: 500, 750
Compatible with PDX, SDX, SDX Pro, EPX

- [SFC Protect] Added support for access control in SFC Relay Mode, allowing the server to approve or deny connections based on Serial Numbers and block private network access
Compatible with All Models (Except FusionHub)

- [Docker] Added support for running Docker on selected devices by attaching the USB storage
Compatible with Balance: 310 5G/Fiber 5G, 310X, 380X, 580X, 710, 1350, 2500, 2500 EC
Compatible with MAX: BR2 Pro, Transit Duo Pro, Transit Duo Pro E, MBX Mini, HD2/4 MBX
Compatible with MediaFast: 500, 750
Compatible with PDX, SDX, SDX Pro EPX (with EXM-LCDT)

- [Synergy Mode] Added support for Synergized devices over Virtual VLAN WAN
Compatible with Synergized Device: Balance, MAX, MediaFast, UBR: All
Compatible with Synergized Device: PDX
Compatible with Synergy Controller: Balance: 20X, 30 LTE/Pro, One/Two, 210/310 HW4 or above, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with Synergy Controller: MAX: BR1 Mini HW3, BR1 ENT, BR1 Pro 5G, BR1 Pro HW7, BR2 Pro HW4, Transit, 700 HW3 or above, HD1 Dome/Dome Pro, HD2 Dome, HD2 HW5 or above, HD2 Mini, HD4
Compatible with Synergy Controller: MediaFast: All
Compatible with Synergy Controller: UBR: Plus
Compatible with Synergy Controller: SDX, SDX Pro, PDX, EPX

- [Outbound Policy] Added support for the Outbound Policy "Least Used" algorithm to select the WAN connection with the most available uplink bandwidth
Compatible with All Models (Except FusionHub)

- [eSIM] Added support to install Bring-Your-Own eSIM on the Cellular WAN via InControl for devices with a valid PrimeCare / EssentialCare. This feature is planned to be available in InControl version 2.13.
Compatible with Balance: 20X HW3, 310X HW3, 380X, 580X
Compatible with MAX: BR1 Mini/Mini Core HW3/Mini M2M, BR1 Pro 5G, BR1 Pro HW7, BR2 Pro, Transit Duo Pro/Pro E, HD2/4 MBX HW4, HD1 Dome Pro, HD2 Dome Pro E/LR, MBX Mini
Compatible with UBR: Plus EPX

- [AP Controller] Added the capability to select SSIDs from external APs in both SFC "Route by Wi-Fi SSID" and Outbound Policy by "Client's Associated SSID" settings
Compatible with Balance: All
Compatible with MAX: 700, HD2/4, HD2 Mini, Transit, HD2/4 MBX, MBX Mini
Compatible with MediaFast: All
Compatible with PDX, SDX, SDX Pro, EPX

- [System] Increased QoS User Groups to 10 and updated the Content Blocking page to support 10 User Groups for the Exempted User Group Table
Compatible with All Models

Improvements:

- [non-PrimeCare] For non-PrimeCare devices that originally supported two SpeedFusion VPN profiles, they now support three profiles
Compatible with Balance: 30 LTE/Pro, One/Two, 210/310 HW4 or above, 310 5G/Fiber 5G, 310X
Compatible with MAX: All
Compatible with MediaFast: 200
Compatible with Device product code without "-PRM"

- [Synergy Mode] Synergized devices are now upgraded automatically one by one to match the Synergy Controller's firmware version
Compatible with Synergized Device: Balance, MAX, MediaFast, UBR: All
Compatible with Synergized Device: PDX
Compatible with Synergy Controller: Balance: 20X, 30 LTE/Pro, One/Two, 210/310 HW4 or above, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with Synergy Controller: MAX: BR1 Mini HW3, BR1 ENT, BR1 Pro 5G, BR1 Pro HW7, BR2 Pro HW4, Transit, 700 HW3 or above, HD1 Dome/Dome Pro, HD2 Dome, HD2 HW5 or above, HD2 Mini, HD4
Compatible with Synergy Controller: MediaFast: All
Compatible with Synergy Controller: UBR: Plus
Compatible with Synergy Controller: SDX, SDX Pro, PDX, EPX

- [BR1 Mini] SpeedFusion Bonding, Ethernet and Wi-Fi WAN trial licenses are now automatically activated on BR1 Mini HW3/BR1 Mini Core
Compatible with MAX: BR1 Mini/Mini Core/Mini M2M

- [System] Added support to display the IP route table via CLI
Compatible with All Models

- [OpenVPN] Added the "Authentication Token Lifetime" option to the Remote User Access OpenVPN configuration
Compatible with All Models

- [USB Ethernet Adapter] Added support for Microchip LAN7801 USB Ethernet adapter
Compatible with Balance: All
Compatible with MAX: BR1 ENT, BR2 Pro HW4, HD2/4 Indoor Series, HD2/4 MBX, MBX Mini
Compatible with MediaFast: All
Compatible with SDX, SDX Pro

- [Cellular] Improved the connection time for SIM cards with SIM PIN enabled
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX

- Increased the Ethernet Port Status support for various devices, allowing users to view the status of Ethernet ports under "Status" -> "Ethernet Ports".
Compatible with MAX: HD1/2 Dome Pro series, Transit Duo Pro, BR1/2 Pro

- [HD 1/2 Dome] Added an option to disable the status LED on HD1/2 Dome devices
Compatible with MAX: HD1/2 Dome

- [Cellular] Added carrier profile for Dish Network in the United States
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX

- [Cellular & LTEA-US] Added cellular firmware upgrade support for LTEA-US devices
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini
Compatible with UBR: Plus
Compatible with MediaFast: HD2/HD4
Compatible with PDX, SDX, SDX Pro, EPX
Compatible with Device with cellular and product code contains LTEA-US)

- [SFC Protect] Added FaceTime as Cloud Application in SFC Protect
Compatible with All Models (Except FusionHub)

- [SFC Protect] Added Google Meet as Cloud Application in SFC Protect
Compatible with All Models (Except FusionHub)

- [B310 5G] Added Netflow support to Balance 310 5G
Compatible with Balance: 310 5G/Fiber 5G

- [MBX Mini] Added PoE support on the WAN port
Compatible with MAX: MBX Mini

- [Cellular] Added separate FusionSIM and RemoteSIM settings under custom SIM settings, allowing users to set different priorities
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX

- [KVM] Added support for accessing and managing USB storage from Docker containers
Compatible with Balance: 2500 EC
Compatible with MAX: HD2/4 with MediaFast
Compatible with MediaFast: 500, 750
Compatible with SDX Pro, EPX (with EXM-LCDT)

- [BR1 Mini HW3] Added support for configuring trunk with custom VLAN mode on the Ethernet ports of BR1 Mini HW3 devices
Compatible with MAX: BR1 Mini HW3

- [Wi-Fi AP] Added support for configuring Wi-Fi SSID, Radio, and Mesh settings via SNMP, specifically for devices with integrated Wi-Fi
Compatible with Balance: 20X, 30 Pro, One
Compatible with MAX: All (Exclude: BR1 ENT, HD2 Mini, HD1/2 Dome)
Compatible with UBR: Plus
Compatible with PDX

- [KVM] Added support for creating virtual machines by using XML configuration files
Compatible with Balance: 2500 EC
Compatible with MAX: HD2/4 with MediaFast
Compatible with MediaFast: 500, 750
Compatible with SDX Pro, EPX (with EXM-LCDT)

- [System] Added support for different priority levels (high, normal, low) in application queues
Compatible with All Models

- [KVM] Added support for Docker containers to access KVM storage from within the containers
Compatible with Balance: 2500 EC
Compatible with MAX: HD2/4 with MediaFast
Compatible with MediaFast: 500, 750
Compatible with SDX Pro, EPX (with EXM-LCDT)

- [GPS] Added support for GPS receiver to receive GPS NMEA 0183 data over IP network
Compatible with Balance: 20X, 310X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX

- [Cellular] Added support for Japan KDDI carrier profile
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX

- [AP Controller] Added support for managing AP One DX by the AP controller
Compatible with Balance: All
Compatible with MAX: 700, HD2/4, HD2 Mini, Transit, HD2/4 MBX, MBX Mini
Compatible with MediaFast: All
Compatible with PDX, SDX, SDX Pro, EPX

- [MAX Adapter] Added support for MAX Adapter cellular module firmware upgrade on Balance/MAX devices
Compatible with Balance: All
Compatible with MAX: BR1 ENT, BR2 Pro HW4, HD2/4 Indoor Series, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with MediaFast: All
Compatible with SDX, SDX Pro

- [System] Added support for NTP reference ID in compliance with RFC5905
Compatible with All Models

- [Docker] Added support for pulling Docker images from authenticated private Docker registry
Compatible with Balance: 310 5G/Fiber 5G, 310X, 380X, 580X, 710, 1350, 2500, 2500 EC
Compatible with MAX: BR2 Pro, Transit Duo Pro, Transit Duo Pro E, MBX Mini, HD2/4 MBX
Compatible with MediaFast: 500, 750
Compatible with PDX, SDX, SDX Pro EPX (with EXM-LCDT)

- [GPS] Added support for receiving GPS data from external sources via network stream (TCP/UDP) and displaying the location information on the device's web interface and InControl.
Compatible with Balance: 20X, 310X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX

- [FusionHub] Added support for renewing FusionHub licenses via InControl
Compatible with FusionHub

- [Cellular] Added support for restoring the device to factory default via SMS command
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX

- [Docker] Added support for the Event Log to display an error message when attempting to create a Docker container with an incompatible CPU architecture image.
Compatible with Balance: 310 5G/Fiber 5G, 310X, 380X, 580X, 710, 1350, 2500, 2500 EC
Compatible with MAX: BR2 Pro, Transit Duo Pro, Transit Duo Pro E, MBX Mini, HD2/4 MBX
Compatible with MediaFast: 500, 750
Compatible with PDX, SDX, SDX Pro EPX (with EXM-LCDT)

- [Virtual WAN on VLAN] Added support for the PPPoE connection method for Virtual WAN on VLAN
Compatible with Balance: All
Compatible with MAX: All
Compatible with MediaFast: All
Compatible with UBR Plus, SFE Cam
Compatible with PDX, SDX, SDX Pro, EPX

- [NetFlow] Added support for the Web UI that allows users to select the outbound interface for Netflow traffic
Compatible with Balance: 20X, 310X, 380X, 580X, 30 LTE/Pro, One/Two, 210/310 HW4 or above, 305/380 or above
Compatible with MAX: BR1 ENT, Transit, 700 HW3 or above, HD2 HW5 or above, HD4, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with MediaFast: All
Compatible with PDX, SDX, SDX Pro, EPX
Compatible with FusionHub

- [VLAN on LACP] Added support for VLAN on LACP bonded interfaces
Compatible with Balance: 20X, 310X, 380X, 580X, 310 5G/Fiber 5G, 305/380 or above
Compatible with MAX: BR1 Pro 5G, BR1 Pro HW7, BR2 Pro, Transit 5G, HD1 Dome/Dome Pro, HD2/4 MBX, MBX Mini
Compatible with MediaFast: 500, 750
Compatible with PDX, SDX, SDX Pro, EPX

- [NetFlow] Added the feature to bind netflow traffic to a selected WAN interface, allowing the configuration of the outgoing interface for each Netflow collector.
Compatible with Balance: 20X, 310X, 380X, 580X, 30 LTE/Pro, One/Two, 210/310 HW4 or above, 305/380 or above
Compatible with MAX: BR1 ENT, Transit, 700 HW3 or above, HD2 HW5 or above, HD4, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with MediaFast: All
Compatible with PDX, SDX, SDX Pro, EPX
Compatible with FusionHub

- [SFC Protect] Added Zscaler as Cloud Application in SFC Protect
Compatible with All Models (Except FusionHub)

- [SNMP] Enhanced the DEVICE.mib to include additional device information such as device name, product code, hardware revision, and hostname
Compatible with All Models

- [GLTE-G] Fixed the issue where Cellular might not be able to read SMS
Compatible with Device with 4G Cat-18 Cellular WAN

- [Synergy Mode] Fixed the issue where FusionSIM would up and down on Synergy Cellular WAN.
Compatible with Synergized Device: Balance, MAX, MediaFast, UBR: All
Compatible with Synergized Device: PDX
Compatible with Synergy Controller: Balance: 20X, 30 LTE/Pro, One/Two, 210/310 HW4 or above, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with Synergy Controller: MAX: BR1 Mini HW3, BR1 ENT, BR1 Pro 5G, BR1 Pro HW7, BR2 Pro HW4, Transit, 700 HW3 or above, HD1 Dome/Dome Pro, HD2 Dome, HD2 HW5 or above, HD2 Mini, HD4
Compatible with Synergy Controller: MediaFast: All
Compatible with Synergy Controller: UBR: Plus
Compatible with Synergy Controller: SDX, SDX Pro, PDX, EPX

- [Captive Portal] Improved Captive Portal detection by using CAPPORT API (RFC8908, 8910)
Compatible with All Models (Except FusionHub)

- [SFC Protect] SpeedFusion Connect Relay Mode now supports 5 peers
Compatible with All Models (Except FusionHub)

- [PrimeCare] SpeedFusion features are always enabled on the following models: 310 5G/Fiber 5G, and BR1 Pro HW7, BR1 Pro 5G, BR2 Pro HW4 SpeedFusion Bonding is added for the following models with valid PrimeCare: BR1 Mini HW3/Core HW3, and Transit Mini
Compatible with Device product code with the suffix "-PRM"

- [Synergy Mode] Synergy Controller now supports High Availability environment
Compatible with Synergized Device:Balance, MAX, MediaFast, UBR: All
Compatible with Synergized Device:PDX
Compatible with Synergy Controller: Balance: 20X, 30 LTE/Pro, One/Two, 210/310 HW4 or above, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with Synergy Controller: MAX: BR1 Mini HW3, BR1 ENT, BR1 Pro 5G, BR1 Pro HW7, BR2 Pro HW4, Transit, 700 HW3 or above, HD1 Dome/Dome Pro, HD2 Dome, HD2 HW5 or above, HD2 Mini, HD4
Compatible with Synergy Controller: MediaFast: All
Compatible with Synergy Controller: UBR: Plus
Compatible with Synergy Controller: SDX, SDX Pro, PDX, EPX

- [System] Updated the timezone database to version 2023c
Compatible with All Models

Resolved Issues:

- Fixed a system stability issue related to QoS Bandwidth Limit found on firmware 8.4.0 RC 2
Compatible with Balance: 310X, 380X, 580X, 310 5G/Fiber 5G, 305/380 or above
Compatible with MAX: HD2/4 MBX
Compatible with MediaFast: 500, 750
Compatible with PDX, SDX, SDX Pro, EPX

- [Flex Module & FlexModule Mini] Fixed the issue of intermittent "no cable detected" message on USB Ethernet adapter in Synergy Controller mode
Compatible with Balance: 20X SDX, SDX Pro, EPX

- [Cellular & 5GD] Fixed the issue of the Cellular would unexpectedly require the SIM PIN again after Cellular reload
Compatible with Balance: 310 5G/Fiber 5G, 310X
Compatible with MAX: BR1 Pro 5G, BR2 Pro, HD1 Dome Pro
Compatible with X Series: EPX, MBX, SDX Pro, SDX, 580X, 380X, 310X
Compatible with Device with 5G Cellular and product code contains -5GD

- [AP Controller] Fixed the issue where the AP Controller incorrectly counted a disabled integrated AP as online in the dashboard
Compatible with Balance: All
Compatible with MAX: 700, HD2/4, HD2 Mini, Transit, HD2/4 MBX, MBX Mini
Compatible with MediaFast: All
Compatible with PDX, SDX, SDX Pro, EPX

- [Cellular] Fixed the issue where the cellular module connected in roaming even when data roaming was disabled
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX

- [Synergy Mode] Fixed an issue where a Virtual WAN was missing if Synergy WAN was added before it
Compatible with Synergized Device: Balance, MAX, MediaFast, UBR: All
Compatible with Synergized Device: PDX
Compatible with Synergy Controller: Balance: 20X, 30 LTE/Pro, One/Two, 210/310 HW4 or above, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with Synergy Controller: MAX: BR1 Mini HW3, BR1 ENT, BR1 Pro 5G, BR1 Pro HW7, BR2 Pro HW4, Transit, 700 HW3 or above, HD1 Dome/Dome Pro, HD2 Dome, HD2 HW5 or above, HD2 Mini, HD4
Compatible with Synergy Controller: MediaFast: All
Compatible with Synergy Controller: UBR: Plus
Compatible with Synergy Controller: SDX, SDX Pro, PDX, EPX

- [FusionHub] Fixed an issue where L2VPN VLAN filtering did not work on FusionHub in the WebUI
Compatible with FusionHub

- [FusionSIM] Fixed an issue where the SIM toolkit displayed "No SIM information" when the active SIM was RemoteSIM, FusionSIM, or eSIM
Compatible with Balance: 310 5G, 20X, 310X, 380X, 580X
Compatible with MAX: BR1 Pro, Transit Core/Pro, HD2 Mini, HD1/2 Dome/Dome Pro, HD2/4 MBX
Compatible with UBR Plus
Compatible with PDX

- [Virtual WAN on VLAN] Fixed an issue where Virtual WAN on VLAN did not work in some cases
Compatible with Balance: All
Compatible with MAX: All
Compatible with MediaFast: All
Compatible with UBR Plus, SFE Cam
Compatible with PDX, SDX, SDX Pro, EPX

- [Starlink] Fixed an issue where WAN Failover did not happen immediately after a Starlink WAN outage
Compatible with Balance: 310X, 380X, 580X, 310 5G/Fiber 5G, 305/380 or above
Compatible with MAX: BR1 Pro 5G, BR1 Pro HW7, BR2 Pro, Transit 5G, HD1 Dome/Dome Pro, HD2/4 MBX
Compatible with MediaFast: 500, 750
Compatible with PDX, SDX, SDX Pro, EPX

- [SDX with Cellular Module] Fixed issue where SDX HW1/HW2 with FlexModule Plus cellular modules could remain in "Initializating..." state when using internal SIM or SpeedFusion Connect 5G/LTE.
Compatible with SDX HW1/2

- [Cellular & Cat-18] Fixed an issue on the Cat-18 device where occasionally the band information for the secondary band would be missing
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX
Compatible with Device with Cat-18 Cellular, product code contains GLTE-G

- [Cellular & LTEA-Q] Fixed the issue where LTEA-Q cellular devices were unable to establish a connection on the KPN network
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX
Compatible with Device with Cellular and product code contains LTEA-Q

- [FusionHub] Fixed an issue where FusionHub port mapping may not work when using OpenVPN
Compatible with FusionHub

- [System] Fixed an issue where it was not possible to click the "Apply Changes" button when disabling "Static Route Advertising" in the "OSPF & RIPv2 Route Advertisement" settings in the FusionHub Web UI.
Compatible with All Models

- [BGP] Fixed an issue where the "Default route from BGP" selection would disappear from the Web UI
Compatible with All Models

- [EPX] Fixed an issue where the device could unexpectedly reboot with QoS is enabled
Compatible with EPX

- [GPS] Fixed issue of high CPU load after disabling GPS Forwarding
Compatible with Balance: 20X, 310X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX

- [FusionHub] Fixed the issue in FusionHub where routing of traffic might fail when there are a large number of sessions
Compatible with FusionHub

- Fixed the issue of missing LAN port events in the Event Log of the device and InControl
Compatible withMAX: HD1/2 Dome Pro series, Transit Duo Pro, BR1/2 Pro

- [Synergy Mode] Fixed the issue of Synergy WANs repeatedly starting and stopping on the device with more than 90 WANs
Compatible with Synergized Device: Balance, MAX, MediaFast, UBR: All
Compatible with Synergized Device: PDX
Compatible with Synergy Controller: Balance: 20X, 30 LTE/Pro, One/Two, 210/310 HW4 or above, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with Synergy Controller: MAX: BR1 Mini HW3, BR1 ENT, BR1 Pro 5G, BR1 Pro HW7, BR2 Pro HW4, Transit, 700 HW3 or above, HD1 Dome/Dome Pro, HD2 Dome, HD2 HW5 or above, HD2 Mini, HD4
Compatible with Synergy Controller: MediaFast: All
Compatible with Synergy Controller: UBR: Plus
Compatible with Synergy Controller: SDX, SDX Pro, PDX, EPX

- [IPsec] Fixed the issue where IPsec Phase 1 DH Group might display incorrectly as Group 2
Compatible with All Models

- [RemoteSIM] Fixed the issue where Remote SIM Agent did not accept traffic from SpeedFusion VPN
Compatible with Balance: 20X, 310X, 380X, 580X, 310 5G/Fiber 5G
Compatible with MAX: BR1 Pro, Transit Core/Pro, HD2 Mini, HD1/2 Dome/Dome Pro, HD2/4 MBX
Compatible with UBR: Plus
Compatible with PDX

- [Wi-Fi AP] Fixed the issue where the "AP - Turn off when there is no Internet connectivity" feature was not working properly
Compatible with Balance: 20X, 30 Pro, One
Compatible with MAX: All (Exclude: BR1 ENT, HD2 Mini, HD1/2 Dome)
Compatible with UBR: Plus
Compatible with PDX

- [Cellular & Cat-18] Fixed the problem of incorrect band support on T-Mobile and AT&T networks with Cat-18 Cellular
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX
Compatible with Device with Cat-18 Cellular, product code contains GLTE-G

- [SpeedFusion VPN] Resolved the issue where changing the Receive Buffer or FEC settings for sub-tunnels in a SpeedFusion profile could cause the settings to revert to default when editing other sub-tunnel settings
Compatible with All Models

- [FusionHub] Fixed a system instability issue caused by dynamic routing in SpeedFusion
Compatible with FusionHub

- [B20X] Fixed an issue in B20X where a FlexModule Mini cellular module might be detected as an SFP module under rare condition
Compatible with Balance: 20X

- [Cellular] Fixed an issue where cellular WAN could fail to establish a data connection after a firmware upgrade on RemoteSIM supported devices
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX

- [Cellular] Fixed an issue where it was unable to connect to the UK carrier iD
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX

- [System] Fixed an issue where multiple WANs that are using the same IP address could cause the Health Check to fail
Compatible with All Models

- [Synergy Mode] Fixed an issue where Synergy WANs would disconnect and reconnect after applying configuration changes.
Compatible with Synergized Device: Balance, MAX, MediaFast, UBR: All
Compatible with Synergized Device: PDX
Compatible with Synergy Controller: Balance: 20X, 30 LTE/Pro, One/Two, 210/310 HW4 or above, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with Synergy Controller: MAX: BR1 Mini HW3, BR1 ENT, BR1 Pro 5G, BR1 Pro HW7, BR2 Pro HW4, Transit, 700 HW3 or above, HD1 Dome/Dome Pro, HD2 Dome, HD2 HW5 or above, HD2 Mini, HD4
Compatible with Synergy Controller: MediaFast: All
Compatible with Synergy Controller: UBR: Plus
Compatible with Synergy Controller: SDX, SDX Pro, PDX, EPX

- [Cellular] Fixed an issue where the Cellular WAN of a Synergized Device was being repeatedly reset by the Synergy Controller
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX

- [Wi-Fi WAN] Fixed an issue where the Wi-Fi WAN would stop working
Compatible with MAX: 700, BR1/2, HD2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with MediaFast: HD2/4
Compatible with UBR: Plus
Compatible with PDX, MBX

- [IPsec] Fixed IPsec issues that failed to reconnect after an unexpected disconnect and failed to disconnect properly when disabled by the user
Compatible with All Models

- [Flex Module & FlexModule Mini] Fixed the issue of an incorrect WAN connection being marked as "Disabled" when the PrimeCare license expired
Compatible with Balance: 20X
Compatible with SDX, SDX Pro, EPX

- [Cellular] Fixed the issue of cellular connection status not being displayed and empty operator names
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX

- Fixed the issue of configuration not being saved properly
Compatible with MAX: BR1 Pro 5G/HW7, BR2 Pro, HD1/2 Dome Pro, Transit Duo Pro

- [Cellular] Fixed the issue of continuous switching in Cellular WAN between a SIM slot restricted to management traffic and a non-functioning SIM in another slot.
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX

- [Docker] Fixed the issue of Docker containers unable to renew and release DHCP IP
Compatible with Balance: 310 5G/Fiber 5G, 310X, 380X, 580X, 710, 1350, 2500, 2500 EC
Compatible with MAX: BR2 Pro, Transit Duo Pro, Transit Duo Pro E, MBX Mini, HD2/4 MBX
Compatible with MediaFast: 500, 750
Compatible with PDX, SDX, SDX Pro EPX (with EXM-LCDT)

- [Cellular] Fixed the issue of failed cellular firmware upgrade for the Max Adapter LTE module in support.cgi on BR2 Pro
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX

- [FusionHub] Fixed the issue of FusionHub being unable to save SpeedFusion profile configurations
Compatible with FusionHub

- [MAX Adapter] Fixed the issue of MAX Adapter occasionally causing AP devices, which are managed by the AP Controller, to go offline and online in IC2.
Compatible with Balance: All
Compatible with MAX: BR1 ENT, BR2 Pro HW4, HD2/4 Indoor Series, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with MediaFast: All
Compatible with SDX, SDX Pro

- [BR2 Pro] Fixed the issue of missing 2.5Gbps WAN Ethernet port speed option support for BR2 Pro in the Web UI.
Compatible with MAX: BR2 Pro

- [System] Fixed the issue of not displaying VPN sessions in the Active Sessions page's Overview tab
Compatible with All Models

- [AP Controller] Fixed the issue of schedule reboot not working when the AP is being managed
Compatible with Balance: All
Compatible with MAX: 700, HD2/4, HD2 Mini, Transit, HD2/4 MBX, MBX Mini
Compatible with MediaFast: All
Compatible with PDX, SDX, SDX Pro, EPX

- [Remote SIM] Fixed the issue of SIM failover going to a roaming SIM slot even when data roaming is disabled.

- [Synergy Mode] Fixed the issue of Synergized Devices not being able to go online in InControl when the Synergy Controller routes all traffic to a SpeedFusion VPN
Compatible with Synergized Device: Balance, MAX, MediaFast, UBR: All
Compatible with Synergized Device: PDX
Compatible with Synergy Controller: Balance: 20X, 30 LTE/Pro, One/Two, 210/310 HW4 or above, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with Synergy Controller: MAX: BR1 Mini HW3, BR1 ENT, BR1 Pro 5G, BR1 Pro HW7, BR2 Pro HW4, Transit, 700 HW3 or above, HD1 Dome/Dome Pro, HD2 Dome, HD2 HW5 or above, HD2 Mini, HD4
Compatible with Synergy Controller: MediaFast: All
Compatible with Synergy Controller: UBR: Plus
Compatible with Synergy Controller: SDX, SDX Pro, PDX, EPX

- [WAN] Fixed the issue of the DDNS service changeip.com not working
Compatible with All Models

- [LAN] Fixed the issue of unable to add more than 64 VLAN Profiles via API or Remote Web Admin
Compatible with All Models

- [Cellular] Fixed the issue of unexpected disconnection events in ICVA, specifically when only Cellular WAN is in use and the device is redirected from IC2 to ICVA.
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX

- [Cellular & LTE-US] Fixed the issue of unexpected reboots on LTE-US devices when the data roaming option is enabled
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX
Compatible with Device with cellular and product code contains LTE-US

- [KVM] Fixed the issue of USB storage detection and access for virtual machines
Compatible with Balance: 2500 EC
Compatible with MAX: HD2/4 with MediaFast
Compatible with MediaFast: 500, 750
Compatible with SDX Pro, EPX (with EXM-LCDT)

- [USB WAN] Fixed the issue of USB WAN connected to MAX Adapter causing repeated resets
Compatible with Balance: All
Compatible with MAX: BR1 ENT, BR2 Pro HW4, HD2/4 Indoor Series, HD2/4 MBX, MBX Mini
Compatible with MediaFast: All
Compatible with SDX, SDX Pro

- [LoRaWAN] Fixed the issue where an unrecognized region in the LoRaWAN debug log caused configuration rejection, resulting in sensor join requests not being acknowledged by the LoRaWAN gateway.
Compatible with Balance: 20X

- [Cellular] Fixed the issue where cellular connection might not reestablish after a reboot on SDX with EM9191/EM7690
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX

- [B20X] Fixed the issue where configuring the WAN port as a LAN access port for a VLAN on the B20X did not work properly
Compatible with Balance: 20X

- [WAN] Fixed the issue where DDNS updates for no-ip failed intermittently
Compatible with All Models

- [DHCP] Fixed the issue where DHCP clients were potentially experiencing IP conflicts when multiple clients requested IP addresses at near time intervals
Compatible with All Models

- [Remote SIM] Fixed the issue where FusionSIM or RemoteSIM traffic was not working when Bandwidth Allowance was reserved for management traffic

- [BR1 Mini HW3] Fixed the issue where HA (High Availability) does not work on BR1 mini HW3 devices
Compatible with MAX: BR1 Mini HW3

- [SpeedFusion VPN] Fixed the issue where it was not possible to configure a SpeedFusion VPN Layer 2 Profile on FusionHub
Compatible with All Models

- [LAN] Fixed the issue where it was not possible to save a new LAN VLAN setting if there were more than 30 LAN profiles
Compatible with All Models

- [LAN] Fixed the issue where Remote User Access could not be enabled when the LAN DHCP Server was disabled
Compatible with All Models

- [Cellular] Fixed the issue where SFE device was not detecting the SIM after upgrading from 8.2.1 to 8.3.0
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX

- [Cellular] Fixed the issue where the Cellular APN could be changed incorrectly
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX

- [RemoteSIM] Fixed the issue where the device was unable to switch to another remote SIM if the current SIM was expired
Compatible with Balance: 20X, 310X, 380X, 580X, 310 5G/Fiber 5G
Compatible with MAX: BR1 Pro, Transit Core/Pro, HD2 Mini, HD1/2 Dome/Dome Pro, HD2/4 MBX
Compatible with UBR: Plus
Compatible with PDX

- [BR2 Pro] Fixed the issue where the Ethernet WAN Port Speed/Duplex settings were displayed incorrectly on the MAX BR2 Pro
Compatible with MAX: BR2 Pro

- [Cellular] Fixed the issue where the Event Log would incorrectly display "Data Roaming Disabled"
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX

- [Balance LCD Panel] Fixed the issue where the front panel reset admin password feature was not working
Compatible with Balance: 305/380 or above
Compatible with SDX, SDX Pro, EPX

- [LAN] Fixed the issue where the Local DNS Records in the LAN page of the WebUI did not allow entering "127.0.0.1" as the IP Address
Compatible with All Models

- [RemoteSIM] Fixed the issue where the MAX HD1/HD2 Dome HW2 RemoteSIM option was missing in firmware
Compatible with Balance: 20X, 310X, 380X, 580X, 310 5G/Fiber 5G
Compatible with MAX: BR1 Pro, Transit Core/Pro, HD2 Mini, HD1/2 Dome/Dome Pro, HD2/4 MBX
Compatible with UBR: Plus
Compatible with PDX

- [Cellular] Fixed the issue where the names of Cellular WANs were changed
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX

- [Wi-Fi AP] Fixed the issue where the Search Filter box was missing on the AP->Access Point page in the Web UI
Compatible with Balance: 20X, 30 Pro, One
Compatible with MAX: All (Exclude: BR1 ENT, HD2 Mini, HD1/2 Dome)
Compatible with UBR: Plus
Compatible with PDX

- [Synergy Mode] Fixed the issue where the Synergy Controller was not re-querying device licenses after reboot
Compatible with Synergized Device: Balance, MAX, MediaFast, UBR: All
Compatible with Synergized Device: PDX
Compatible with Synergy Controller: Balance: 20X, 30 LTE/Pro, One/Two, 210/310 HW4 or above, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with Synergy Controller: MAX: BR1 Mini HW3, BR1 ENT, BR1 Pro 5G, BR1 Pro HW7, BR2 Pro HW4, Transit, 700 HW3 or above, HD1 Dome/Dome Pro, HD2 Dome, HD2 HW5 or above, HD2 Mini, HD4
Compatible with Synergy Controller: MediaFast: All
Compatible with Synergy Controller: UBR: Plus
Compatible with Synergy Controller: SDX, SDX Pro, PDX, EPX

- [Remote SIM] Fixed the issue where updating the RemoteSIM configuration did not unlink the previous configuration as expected.

- [Cellular] Fixed: Could not establish cellular connection if IMS PDN profile was enabled
Compatible with Balance: 20X, 30 LTE/Pro, 310 5G/Fiber 5G, 310X, 380X, 580X
Compatible with MAX: BR1/2, HD1/2/4, Transit, HD2/4 MBX, MBX Mini, HD2/4 with MFA
Compatible with UBR: Plus
Compatible with PDX, SDX, SDX Pro, EPX

Known Issues:

- Enabling Layer 2 SpeedFusion VPN with settings to allow 'All VLAN ID' on SDX may result in the device becoming unresponsive
Affected SDX, MBX, MBX Mini

- [Docker] Docker container cannot be run on a device that doesn't have an active DHCP server running
Affected Balance: 310 5G/Fiber 5G, 310X, 380X, 580X, 710, 1350, 2500, 2500 EC
Affected MAX: BR2 Pro, Transit Duo Pro, Transit Duo Pro E, MBX Mini, HD2/4 MBX
Affected MediaFast: 500, 750
Affected PDX, SDX, SDX Pro EPX (with EXM-LCDT)

- [System] YouTube blocking may not work if YouTube traffic is using QUIC
Affected SDX, MBX, MBX Mini

Important Notices:

- The configuration file for Firmware 8.3.0 or above is not compatible with firmware versions 8.2.1 or below.
- For FusionSIM and RemoteSIM users, it is suggested to upgrade the SIM Injector to Firmware 1.1.130
- InControl must be enabled on PrimeCare devices to update software features such as SpeedFusion (Bonding, WAN Smoothing, Hot Failover).
- Further major firmware updates will NOT support the following models. They will receive Firmware 8.3.x maintenance releases as needed

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn't be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don't always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you're looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don't power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don't miss the update that will improve your device.