Panasonic AW-RP150 Camera Firmware 2.00-00-0.09

Changes:

- AK-UB300 with Pan/Tilt Head (AW-PH650/PH400/PH405) is supported.
- The lighting of PRESET button on Pan/Tilt Head has been improved to operate in the same way as AW-RP120.
- Linkage with ROP (AK-HRP1000/1005 ver.4.80-00-0.03 or higher is required for ROP.) A ROP setting menu is added so that the selected camera at the AW-RP150 can be activated on the connected ROP.
- Linkage with AV-HS6000. Switching function is supported.
- “All Delete” function of TMEM (Tracing Memory) is added.
- “Camera Group number” indication is added under the Status display.
- “ND Filter” is added to the assign items of 1-4 Knob. When you rotate dial, ND is selectable.
- “I.Zoom” status is added in Camera Info. The I.Zoom function is assignable to User Button.
- A "CAMSEL OP" menu is added. Usually camera selection is not possible during operation (PAN/TILT/ZOOM). When this menu is set to “MULTI”, you can select another camera even during operation.
- “IRIS LIMIT” function is added. (Only Close direction)
- “PRESET LIST NAME” Edit function is added.
- One of 7 colors is assignable to Each PRESET button.
- PRESET command (of Pan/Tilt Head etc.) can be sent even if preset data is not registered. It can be turned "ANYTIME" at "EXEC MD" menu in order to have interchangeability with AW-RP120.
- Operation direction of PAN/TILT lever setting is added.
- PRESET LIST display is added on Status screen. PRESET information can be displayed with Lens information.

About Surveillance/Network Camera Software:

Applying the appropriate software for your network camera helps computers properly connect with the device, and adds support for various surveillance features that the camera benefits from (such as monitoring specific areas).

If you're considering a software upgrade, you should know that this process might improve the unit's overall performance and stability, add support for new features (or enhance existing ones), or include fixes for various issues. However, bear in mind that not all software updates bring significant changes.

As for the installation method, the steps vary depending on the type of software that you are about to apply; so, make sure you carefully read and understand the installation steps so that you don't end up with a broken device.

If you're thinking about applying this software version, hit the download button and update your camera once you have familiarized yourself with the installation method. In addition to that, don't forget to check with our website as often as possible so that you don't miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.