Panasonic AK-UCU600S Camera Control Unit Firmware 01.52

Changes:

- The formats available for SDI OUTPUT have been added.- (TrueP, OVER(3G), and others.）
- MoIP function has been enhanced.（with AK-NP600G） Network(SFP+ primary)/(SFP+ secondary)/(1GbE) > DHCP: ON/OFF

Versions:

- VERSION 0F.F5-000-01.05
- SOFTWARE 01.52-
- NETWORK 01.02-000-00.05
- UHD FPGA 01.10-
- HS FPGA 01.10-
- RETURN FPGA 1 03.38-
- RETURN FPGA 2 03.17-
- MAIN FPGA 01.21-
- ICOM FPGA 03.01-00-01.00
- USC FPGA 01.10-

Version display method:

- Each software version can be confirmed at item “VERSION” in MAINTENANCE menu.
- Connect the picture monitor to [8/PM] of HD/SD SDI OUT connector.
- Hold down the MENU button. The TOP menu screen of CCU menu appears and the MENU button lights.
- Select “MAINTENANCE” and press the SELECT dial button to open the MAINTENANCE menu screen.
- Select “VERSION” and pressing the SELECT dial button, VERSION screen is displayed.
- Each software version is displayed on the VERSION screen.

Update procedure:

- Download and unzip the archive.
- Copy the “PRIVATE” folder onto a formatted SD memory card
- Connect the picture monitor TV to [8/PM] of HD/SD SDI OUT connector.
- Insert an SD memory card into the SD memory card slot.
- Hold down the MENU button. The TOP menu screen of CCU menu appears and the MENU button lights.
- Select “MAINTENANCE” and press the SELECT dial button to open the MAINTENANCE menu screen.
- Select item “SD CARD” and press the SELECT dial button to open the SD CARD menu screen
- Select the item “UPDATE” and set “YES?”(Character is blink).
- Press the SELECT dial button, the update program is started.
- The software update may take approx. 40 minutes. Do not power down while updating
- When the update is completed, the message “UPDATE COMPLETE” is displayed and CCU will be automatically rebooted  

About Integrated Web Camera Updates:

Enabling your embedded web camera by installing appropriate software will allow your system to capture and send images through a computer network, and include support for various features that the webcam benefits from.

In addition to that, updating the software on your device can fix various problems that might be encountered during the product's lifetime, and improve existing features like image quality, or add support for new ones.

When it comes to the installation process, the steps are very simple, as each manufacturer tries to make them as easy as possible, so that every user can perform the update on their own – simply run the package and follow the on-screen instructions for a complete installation.

Therefore, if you consider applying this package, hit the download button, and install it on your computer. Moreover, constantly check with our website in order to make sure that you don't miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.