NVIDIA Mellanox MCX631432AN-ADAB SmartNIC Firmware 26.33.1048

Changes and New Features:

- MADs: Added a new MAD of class SMP that has the attributes hierarchy_Info as defined in the IB Specification and is used to query the hierarchy information stored on the node and the physical port.
- NV Configurations via the Relevant Reset Flow: Added pci_rescan_needed field to the MFRL access register to indicate whether a PCI rescan is needed based on the NV configurations issued by the software. Note: If the Keep Link Up NV configuration is changed, phyless reset will be blocked.
- VF Migration: Added support for VF migration. The hypervisor can now suspend its VF, meaning from that point the VF cannot perform action such as send/receive traffic or run any command. In this firmware version only the suspend resume mode is supported (on the same VM).
- VF Migration: Added support for VF migration.
- ICM Pages: Added a new register (vhca_icm_ctrl access_reg) to enable querying and limiting the ICM pages in use.
- XRQ QP Errors Enhancements: Enhanced the XRQ QP error information provided to the user in case QP goes into an error state. In such case, QUERY_QP will provide information on the syndrome type and which side caused the error.
- ibstat: Updated the ibstat status reported when the phy link is down. Now QUERY_VPORT_STATE.max_tx_speed of UPLINK will not be reported as 0 anymore.
- NetworkPort Schema Replacement: Replaced the deprecated NetworkPort schema with Port schema in NIC RDE implementation.
- SW Steering Cache: Modified the TX or RX cache invalidation behavior. TX or RX cache invalidation now does not occur automatically but only when the software performs the sync operation using the using sync_steering command.
- Firmware Steering: Enabled the option to modify the ip_ecn field in the packet header in firmware steering.
- Mega Allocations in Bulk Allocator Mechanism: Modified the maximum bulk size per single allocation from "log_table_size - log_num_unisizes", to allocate any range size, to remove limitations that HWS objects such as counters and modify arguments might encounter.

Bug Fixes:

- Fixed rare lanes skew issue that caused CPU to timeout in Rec.idle.
- Fixed a configuration issue which flipped the MSB of Partition Key field in CNP packets and led to P_KEY mismatch between CNP packets and regular packets.
- Fixed a rare case where asserts and ext_synd appeared in dmesg after performing driver restart. 
- Enabled delay drop for hairpin packets. If a hairpin QP is created with delay_drop_en enabled, the feature will be enabled across all GVMIs, based on the delay drop status.
- Fixed an issue that prevented the np_cnp_sent counter from increasing after it reached its maximum although there were CNPs sent upon receiving ECN-marked packets.

About Network Adapter Drivers:

When connected, the operating system usually installs a generic driver that helps the computer to recognize the newly attached device.

However, proper software must be applied if you want to make use of all features that the network adapter has available. This task also allows computers to properly recognize all device characteristics such as manufacturer, chipset, technology, and others.

Updating the adapter's drivers and utilities version might improve overall performance and stability, increase transfer speeds, fix different compatibility problems and several network-related errors, as well as bring various other changes.

To install this release, simply get the package, extract it if necessary, run the setup, and follow the instructions displayed on-screen. When done, don't forget to perform a system restart and reconnect the network adapter to make sure that all changes take effect properly.

Without further ado, if you intend to apply this version, click the download button and install the package. Moreover, check with our website as often as possible so that you don't miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.