NVIDIA MCX653106A-EFA SmartNIC Firmware 20.43.1014

Important Notes:

- SR-IOV - Virtual Functions (VF) per Port - The maximum Virtual Functions (VF) per port is 127.
- It is recommended to enable the “above 4G decoding” BIOS setting for features that require large amount of PCIe resources. Such features are: SR-IOV with numerous VFs, PCIe Emulated Switch, and Large BAR Requests.
- Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices' firmware to this release to improve the devices’ firmware security and reliability.
- When upgrading or changing the configuration on multi-host adapter cards, for the changes to take effect, PCIe restart must be simultaneously sent from both hosts (servers).
- When upgrading or changing the configuration on multi-host adapter cards, for the changes to take effect, PCIe restart must be simultaneously sent from both hosts (servers). To do so, perform the following: shut down the server with the auxiliary card, shut down the server with the primary card, bring back the server with the primary card, and bring back the server with the auxiliary card.

Changes and New Features:

- Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.). The feature is configured using a new general object: RDMA-Telemetry object, and depends on the following new caps: HCA_CAP.rdma_telemetry_notification_types and HCA_CAP.rdma_telemetry.
- Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.
The 5 sub-operations are:
- QUERY_HCA_CAP with other function
- QUERY_VUID with direct data
- QUERY_ROCE_ADDRESS with other vport
- SET_HCA_CAP with other function
- POSTPONE_CONNECTED_QP_TIMEOUT with other vport
The new added caps are:
- tool_partial_cap.postpone_conn_qp_timeout_other_vport,
- tool_partial_cap.set_hca_cap_other_func
- tool_partial_cap.query_roce_addr_other_vport
- tool_partial_cap.query_vuid_direct_data
- tool_partial_cap.query_hca_cap_other_func

Bug Fixes:

- Fixed an issue that resulted in setup crash when create_sq used invalid mbox. Now the invalid mbox is replaced with a valid DB.
- Fixed the query for FACTORY default NV configuration values. The firmware always returned the "next" value to be applied.

About Network Adapter Drivers:

When connected, the operating system usually installs a generic driver that helps the computer to recognize the newly attached device.

However, proper software must be applied if you want to make use of all features that the network adapter has available. This task also allows computers to properly recognize all device characteristics such as manufacturer, chipset, technology, and others.

Updating the adapter's drivers and utilities version might improve overall performance and stability, increase transfer speeds, fix different compatibility problems and several network-related errors, as well as bring various other changes.

To install this release, simply get the package, extract it if necessary, run the setup, and follow the instructions displayed on-screen. When done, don't forget to perform a system restart and reconnect the network adapter to make sure that all changes take effect properly.

Without further ado, if you intend to apply this version, click the download button and install the package. Moreover, check with our website as often as possible so that you don't miss a single new release.