Nikon Z 6 Camera Firmware 3.10 for macOS

Changes:

- Added support for Nikon Z mount TC-1.4x/TC-2.0x teleconverters.
- Added support for F mount lens firmware updates. F mount lens firmware updates are supported from FTZ mount adapter firmware version 1.10.
- Changed some of the f/-number values displayed when exposure is adjusted in steps of 1/3 EV (f/1.2 is now displayed as f/1.3). As of July 21, 2020, this applies to NIKKOR Z 58mm f/0.95 S Noct lenses.
- The bracketing increment is now properly applied to photos taken with exposure locked during AE bracketing in Continuous H (extended) release mode.
- When an external recorder compliant with Atomos Open protocol is connected, movie recording can now be started and stopped using camera controls if all the following conditions are met:
1. The camera is in movie mode and the recorder is connected via HDMI.
2. A memory card is inserted.
3. The following are selected for HDMI > Advanced in the SETUP MENU:
▹ External recording control > On
▹ Output data depth > 10 bit
▹ N-log setting > Off
4. 3840x2160; 30p/25p/24p is selected for Frame size/frame rate in the MOVIE SHOOTING MENU.

Fixed the following issues:

- The camera monitor would exhibit a green cast when the camera was connected to an external display via HDMI if:
▹ Adobe RGB was selected for Color space in the PHOTO SHOOTING MENU,
▹ Shutter-release button > Record movies was selected for Custom Setting g2 (Custom control assignment) in Group “g” (Movie) of the CUSTOM SETTING MENU,
▹ 10 bit was selected for HDMI > Advanced > Output data depth in the SETUP MENU,
▹ On (cannot record to card) was selected for HDMI > Advanced > N-Log setting in the SETUP MENU,
▹ On was selected for HDMI > Advanced > View assist in the SETUP MENU, and
▹ movie mode was selected with the photo/movie selector.
- The crop selected for “tall” (portrait-orientation) pictures using PictBridge would not be accurately reflected in the printed image.
- In rare circumstances, autofocus would not engage if a NIKKOR Z DX 16–50mm f/3.5–6.3 VR lens was extended at the same time the camera was turned on.

Viewing the Camera Firmware Version:

- Turn the camera on.
- Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version.
- Check the camera firmware version.
- Turn the camera off.

Updating the Camera Firmware:

- Create a folder on the computer hard disk and name it as desired.
- Download the file to the folder newly-created.
- Extract the file to a folder named “Z6Update”
- Using a card slot or card reader, copy the .bin to a memory card that has been formatted in the camera.
- Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
- Insert the memory card into the camera and turn the camera on.
- Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version.

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.