Nikon D810A Camera Firmware 1.02 for Mac OS

New Features:

- The WT-7 wireless transmitter is now supported.

Fixed the following issues:

- Multiple exposures were not recorded correctly.

- If On was selected for Auto distortion control, distortion would appear at the edges of photos taken with NEF (RAW) + JPEG fine selected for Image quality and Medium selected for JPEG/TIFF recording > Image size.

- Photos taken immediately after lenses were exchanged would not be recorded at the correct exposure.

- The protect icon did not display correctly.

- If On was selected for Auto distortion control, the camera would stop responding when the user attempted to take pictures with NEF (RAW) + JPEG fine selected for Image quality, Small selected for NEF (RAW) recording > Image size, and RAW primary - JPEG secondary selected for Secondary slot function.

- Shutter speeds for the electronic front-curtain shutter would sometimes be faster than 1/2000 s.

- Pictures would sometimes not be recorded.

Viewing the Camera Firmware Version:

- Turn the camera on.

- Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version.

- Check the camera firmware version.

- Turn the camera off.

Updating the Camera Firmware:

- Create a folder on the computer hard disk and name it as desired.

- Save the downloadable file to the newly-created folder.

- Run the package to extract a .bin file (the camera firmware) to a folder named “D810AUpdate”

- Using a card slot or card reader, copy .bin file to a memory card that has been formatted in the camera.

- Insert the memory card into the Slot 1 on the camera and turn the camera on.

- Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.

- Once the update is complete, turn the camera off and remove the memory card.

- Confirm that the firmware has been updated to the new version.

About Digital Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.