- Added two new AF-area modes: group-area AF (HL) and group-area AF (VL). The user selects a row (HL) or column (VL) of focus points; when AF-C is selected for focus mode, the camera will give priority to the point in the selected row or column containing the subject closest to the camera.
- Updated the photo info display to show the color temperature for photos taken with Auto selected for white balance.
- Added an Exif tag listing the difference between the local time zone and UTC, part of the Exif 2.31 specification.
- Added the support for the following features of AF-P lenses: If the standby timer expires after the camera has focused, the focus position will not change when the timer is reactivated.
- Added the support for the following features of AF-P lenses: In manual focus mode, the focus indicator in the viewfinder (or in live view, the focus point selected in the monitor) will flash to show that infinity or the minimum focus distance has been reached by rotating the focus ring.
- Changed the checks performed when Clean image sensor > Clean now is selected in the SETUP MENU. We recommend that you perform image sensor cleaning after updating the firmware.
- Reduced the amount of time needed to connect to hidden SSIDs when WPA-PSK or WPA2-PSK is selected for Authentication.
- Updated some help text.
- The higher the amount of Active D Lighting selected when optional flash units were used with auto aperture (AA), non-TTL auto (A), or distance-priority manual (GN) flash mode, the more the resulting images would be underexposed.
- Changes to exposure (including exposure compensation) would not be reflected in the photo live view exposure preview while the display was zoomed in.
- Photo live view display WB could not be selected in the i-button menu while the exposure preview was displayed in photo live view.
- Taking long bursts of photos with On selected for Network > Options > Auto send would sometimes drastically slow the recording of data to the memory card.
- Turn the camera on.
- Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version.
- Check the camera firmware version.
- Turn the camera off.
- Create a folder on the computer hard disk and name it as desired.
- Download and run the firmware to extract the following file to a folder named “D5Update”
- Using a card slot or card reader, copy .bin to a memory card that has been formatted in the camera.
- Insert the memory card into the Slot 1 on the camera and turn the camera on.
- Select Network in the SETUP MENU and confirm that OFF is selected for Network connection.
- Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version.
Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.
On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.
It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.
This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.
When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.
However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.
That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.
Top 4 Download periodically updates information of Nikon D5 Camera Firmware 1.20 for Mac OS full driver from the manufacturer, but some information may be slightly out-of-date.
Using warez version of Nikon D5 Camera Firmware 1.20 for Mac OS driver is hazardous. Our driver download links are directly from our mirrors or publisher's website, Nikon D5 Camera Firmware 1.20 for Mac OS torrent files or shared files from free file sharing and free upload services, including Rapidshare, HellShare, HotFile, FileServe, MegaUpload, YouSendIt, MailBigFile, DropSend, MediaMax, zUpload, MyOtherDrive, SendSpace, DepositFiles, Letitbit, LeapFile, DivShare or MediaFire, are not allowed!
It is not recommended to download drivers from illegal sites which distribute a keygens, key generators, pirate keys, serial numbers, warez full versions or cracks for Nikon D5 Camera Firmware 1.20 for Mac OS. These drivers might corrupt your computer installation or breach your privacy. A driver might contain a trojan horse opening a backdoor on your computer. Hackers can use this backdoor to take control of your computer, copy data from your computer or to use your computer to distribute viruses and spam to other people.
Download Now
Update All Drivers