- Fixed an issue that lengthened startup times by a few seconds if the camera was turned on while the lens was in the process of being extended.
- Attach a NIKKOR Z DX 16-50mm f/3.5-6.3 VR lens to the camera and turn the camera on.
- Press the camera MENU button and select SETUP MENU > Firmware version to display the camera and lens firmware versions.
- Check the firmware version.
- Turn the camera off.
- Create a folder on the computer hard disk and name it as desired and download the file to this folder.
- Run the file to extract the following file to a folder named “ZDX16_50F35_63VRUpdate”: MLZDX16_50F35_63VRxxxx.bin (the lens firmware)
- Using a card slot or card reader, copy “MLZDX16_50F35_63VRxxxx.bin” to a memory card that has been formatted in the camera.
- Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
- Insert the memory card into the camera and turn the camera on.
- Select SETUP MENU > Firmware version and follow the on-screen instructions to perform the firmware update.
- When a message is displayed stating that the update is complete, turn the camera off and remove the memory card.
- Turn the camera on and confirm that the firmware has been updated to the new version.
Upgrading or downgrading your lens to a different firmware version might enhance the unit's overall performance and stability, and could also improve some of the lenses' features (a good example would be faster autofocus speed).
In order to apply a firmware properly, other than the one already installed, you should check that the lenses are connected to the camera body, copy the compatible update on a memory card, and insert it into the camera.
From the device's menu, browse to the Firmware Upgrade section, and enable the new firmware. Since each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, you must make sure that you read the product's installation guide.
Therefore, if you consider installing this present release, click on the download button to get the firmware, and apply it. Moreover, don't forget to check our website constantly so that you don't miss any of the future versions.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Top 4 Download periodically updates information of NIKKOR Z DX 16-50mm f/3.5-6.3 VR Lens Firmware 1.01 full driver from the manufacturer, but some information may be slightly out-of-date.
Using warez version of NIKKOR Z DX 16-50mm f/3.5-6.3 VR Lens Firmware 1.01 driver is hazardous. Our driver download links are directly from our mirrors or publisher's website, NIKKOR Z DX 16-50mm f/3.5-6.3 VR Lens Firmware 1.01 torrent files or shared files from free file sharing and free upload services, including Rapidshare, HellShare, HotFile, FileServe, MegaUpload, YouSendIt, MailBigFile, DropSend, MediaMax, zUpload, MyOtherDrive, SendSpace, DepositFiles, Letitbit, LeapFile, DivShare or MediaFire, are not allowed!
It is not recommended to download drivers from illegal sites which distribute a keygens, key generators, pirate keys, serial numbers, warez full versions or cracks for NIKKOR Z DX 16-50mm f/3.5-6.3 VR Lens Firmware 1.01. These drivers might corrupt your computer installation or breach your privacy. A driver might contain a trojan horse opening a backdoor on your computer. Hackers can use this backdoor to take control of your computer, copy data from your computer or to use your computer to distribute viruses and spam to other people.
Download Now
Update All Drivers