- Added support for linear focus ring rotation during manual focus: when an option other than [Non-linear] is selected for [Focus ring rotation range] * in the camera [CUSTOM SETTINGS MENU], rotating the ring the selected amount takes focus from the minimum distance to infinity regardless of rotation speed.
- Added support for [Switch focus/control ring roles] * in the camera [CUSTOM SETTINGS MENU].
- Attach the lens to the camera and turn the camera on.
- Press the camera MENU button and select SETUP MENU > Firmware version to display the camera and lens firmware versions.
- Check the firmware version.
- Turn the camera off.
- Create a folder on the computer hard disk, name it as desired, and dwnload the firmware there.
- Run the package to extract the lens firmware file (.bin).
- Using a card slot or card reader, copy the .bin file to a memory card that has been formatted in the camera.
- Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
- Insert the memory card into the camera and turn the camera on.
- Select SETUP MENU > Firmware version and follow the on-screen instructions to perform the firmware update.
- When a message is displayed stating that the update is complete, turn the camera off and remove the memory card.
- Turn the camera on and confirm that the firmware has been updated to the new version.
Upgrading or downgrading your lens to a different firmware version might enhance the unit's overall performance and stability, and could also improve some of the lenses' features (a good example would be faster autofocus speed).
In order to apply a firmware properly, other than the one already installed, you should check that the lenses are connected to the camera body, copy the compatible update on a memory card, and insert it into the camera.
From the device's menu, browse to the Firmware Upgrade section, and enable the new firmware. Since each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, you must make sure that you read the product's installation guide.
Therefore, if you consider installing this present release, click on the download button to get the firmware, and apply it. Moreover, don't forget to check our website constantly so that you don't miss any of the future versions.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Top 4 Download periodically updates information of NIKKOR Z 24-70mm f/2.8 S Lens Firmware 1.20 for macOS full driver from the manufacturer, but some information may be slightly out-of-date.
Using warez version of NIKKOR Z 24-70mm f/2.8 S Lens Firmware 1.20 for macOS driver is hazardous. Our driver download links are directly from our mirrors or publisher's website, NIKKOR Z 24-70mm f/2.8 S Lens Firmware 1.20 for macOS torrent files or shared files from free file sharing and free upload services, including Rapidshare, HellShare, HotFile, FileServe, MegaUpload, YouSendIt, MailBigFile, DropSend, MediaMax, zUpload, MyOtherDrive, SendSpace, DepositFiles, Letitbit, LeapFile, DivShare or MediaFire, are not allowed!
It is not recommended to download drivers from illegal sites which distribute a keygens, key generators, pirate keys, serial numbers, warez full versions or cracks for NIKKOR Z 24-70mm f/2.8 S Lens Firmware 1.20 for macOS. These drivers might corrupt your computer installation or breach your privacy. A driver might contain a trojan horse opening a backdoor on your computer. Hackers can use this backdoor to take control of your computer, copy data from your computer or to use your computer to distribute viruses and spam to other people.
Download Now
Update All Drivers