- Supports NAT mode configurations per SSID.
- WAX610: Updates the power table for India.
- Fixes security vulnerabilities.
- Fixes the issue where the configd crashes and the UI is not reachable when attempting to access the AP UI after changing the management VLAN.
- Due to the removal of U-NII-1 and U-NII-2A channels from the WAX610Y in Europe to meet the CE regulatory requirement, customers might face issues with the mesh formation when the root AP is operating in channels U-NII-1 or U-NII-2A and the WAX610Y is set up as an extender. Workaround: The root AP must operate in channels other than U-NII-1 or U-NII-2A in the 5GHz radio band.
- Some clients might not display an auto pop-up while connecting to a guest SSID, or there might be a delay before the splash page displays. Workaround: Use a web browser to access the Internet.
- An Intel Wireless AC 9560 client on the Windows 10 operating system can fail to connect when both PMF and 802.11r are enabled on the SSID. Workaround: Disable PMF configuration.
- Data path and client connectivity issues might be observed when the access point is operating on a DFS channel where the channel width is set to 80MHz. Workaround: Change the channel width to 40 MHz.
- Some older generation iOS devices with iOS version 14.4.2 might fail to connect to a WPA3 personal SSID. Workaround: Update the device to the latest iOS version and change the SSID security to WPA3/WPA2 Personal.
- MAC ACL does not work as expected when MAC Randomization is enabled for wireless clients. Workaround: Disable MAC Randomization on the clients.
- Client connectivity and throughput-related interoperability issues can occur with certain Windows, Android, and iOS client OS versions when WPA3/WPA2 mixed mode security is enabled on the SSID. Workaround: Update to the latest available Windows/Android/iOS OS version, and update the WiFi client to the latest driver.
- Interoperability issues can occur with certain clients when the Band Steering feature is enabled. Workaround: Disable this feature if client interoperability issues are observed.
- Some special characters are not supported in Instant Captive Portal SSIDs. Workaround: We recommend against using special characters in the SSID name.
- In some cases, wirelessly connected to NAT mode SSID are not able to reach the internet when URL filtering is enabled. Workaround: Avoid NAT mode SSID and URL filtering combination.
If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.
Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it's anything but that.
It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.
With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don't miss a single new release.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Top 4 Download periodically updates information of NETGEAR WAX610 Access Point Firmware 9.6.0.7 full driver from the manufacturer, but some information may be slightly out-of-date.
Using warez version of NETGEAR WAX610 Access Point Firmware 9.6.0.7 driver is hazardous. Our driver download links are directly from our mirrors or publisher's website, NETGEAR WAX610 Access Point Firmware 9.6.0.7 torrent files or shared files from free file sharing and free upload services, including Rapidshare, HellShare, HotFile, FileServe, MegaUpload, YouSendIt, MailBigFile, DropSend, MediaMax, zUpload, MyOtherDrive, SendSpace, DepositFiles, Letitbit, LeapFile, DivShare or MediaFire, are not allowed!
It is not recommended to download drivers from illegal sites which distribute a keygens, key generators, pirate keys, serial numbers, warez full versions or cracks for NETGEAR WAX610 Access Point Firmware 9.6.0.7. These drivers might corrupt your computer installation or breach your privacy. A driver might contain a trojan horse opening a backdoor on your computer. Hackers can use this backdoor to take control of your computer, copy data from your computer or to use your computer to distribute viruses and spam to other people.
Download Now
Update All Drivers
