- Fixes a security vulnerability during the firmware update. The access point used HTTP and TFTP protocols to download the new firmware. This was modified to use secured HTTPS and SFTP protocols.
- Fixes the issue where the DHCP server configuration in router mode could allocate the IP address to a maximum of 100 clients only. The DHCP server pool amount was increased to 254.
- Fixes the incorrect transmitted packet count on the statistics page.
- Fixes the issue where the WiFi driver does not update channel configuration when the channel width and channel are changed at same time. The driver not updating the configured channel after reboot was also fixed.
- Fixes the issue where the traffic distribution pie chart disappears from the Dashboard.
- Improves the stability of the firmware. Fixes multiple application crashes and user interface hang issues.
- Updates the PoE power class as ‘0’ for both the WAC510 and WAC505 access points in the LLDP configuration. This helps the access point to fetch the correct power from PoE enabled switches.
- While using the Facebook Wi-Fi feature, there is an auto pop-up issue with some iOS devices and devices with old android versions. Some iOS devises and some Android devices may not pop up the Facebook Authentication page. User need to launch the web browser to get the Authentication page.
- May need to clear the web browser cache to get the latest web management interface changes after upgrades to a newer firmware version.
If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.
Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it's anything but that.
It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.
With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don't miss a single new release.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Top 4 Download periodically updates information of NETGEAR WAC510 Access Point Firmware 5.0.10.2 full driver from the manufacturer, but some information may be slightly out-of-date.
Using warez version of NETGEAR WAC510 Access Point Firmware 5.0.10.2 driver is hazardous. Our driver download links are directly from our mirrors or publisher's website, NETGEAR WAC510 Access Point Firmware 5.0.10.2 torrent files or shared files from free file sharing and free upload services, including Rapidshare, HellShare, HotFile, FileServe, MegaUpload, YouSendIt, MailBigFile, DropSend, MediaMax, zUpload, MyOtherDrive, SendSpace, DepositFiles, Letitbit, LeapFile, DivShare or MediaFire, are not allowed!
It is not recommended to download drivers from illegal sites which distribute a keygens, key generators, pirate keys, serial numbers, warez full versions or cracks for NETGEAR WAC510 Access Point Firmware 5.0.10.2. These drivers might corrupt your computer installation or breach your privacy. A driver might contain a trojan horse opening a backdoor on your computer. Hackers can use this backdoor to take control of your computer, copy data from your computer or to use your computer to distribute viruses and spam to other people.
Download Now
Update All Drivers