- Fixes the issue where the client isolation process stops during bulk configurations.
- Fixes the issue where the SSID scheduling does not work after the AP reboots.
- Fixes the issue where the AP is not able to resolve the DNS when the management VLAN and profile VLAN are different.
- Fixes the issue where wireless clients are not able to reach the Internet after enabling client isolation with a non-default profile VLAN.
- Fixes the issue where the client isolation whitelist table is not cleared when an SSID is deleted or a VLAN is changed.
- Fixes the issue where a configured static IP address is changed automatically after enabling the captive portal.
- Fixes the issue where the WAC505 does not allow a connection to the WiFi mesh extender (EX8000)
- Fixes the KBPS and MB in the help pages.
- Fixes the icons that become invisible when the Chrome browser is in dark mode.
- Fixes the issue where access to the AP UI is lost when an untagged VLAN is configured the same as a profile VLAN.
- Fixes security vulnerabilities.
- Radio buttons don't display during a day zero configuration of the access point. Workaround: The AP dashboard loads later.
- MAC ACL does not work as expected when MAC Randomization is enabled on the wireless clients. Workaround: Disable MAC Randomization on the devices.
- 802.11r-based Fast Roaming fails for Samsung Galaxy S10 clients when connected to a WPA2-Enterprise SSID where Protected Management Frames (PMF) is enabled. Workaround: Disable PMF.
- Instant Captive Portal feature does not work for clients connected to an OWE SSID on a newly on boarded access point. Workaround: Reapply Captive Portal configuration from Insight.
- Issues in the Insight Instant Mesh WiFi can cause the access point to operate on a non-optimum channel. Workaround: Configure the access point to use a static channel.
- Client connectivity and throughput-related interoperability issues can occur with certain Windows, Android, and iOS client OS versions, or when WPA3/WPA2 mixed mode security is enabled on the SSID. Workaround: Upgrade to the latest available Windows/Android/iOS OS version, and update the WiFi client to the latest driver.
- Interoperability issues can occur with certain clients when Band Steering feature is enabled. Workaround: Disable this feature if client interoperability issues are observed.
- Some clients might not show the pop-up login screen when connected to the Instant Captive Portal SSID. Workaround: Launch a web browser and enter the URL for the captive portal authentication page into the browser's address field. For example, open any http web site such as homepage
- Some special characters are not supported in Instant Captive Portal SSIDs. Workaround: We recommend against using special characters in the SSID name.
- While using the Facebook Wi-Fi feature, some iOS devices and Android devices might not display the Facebook Authentication page automatically. Workaround: The user can launch a web browser to display the Facebook Authentication page.
- After updating to a newer firmware version, the local browser interface might not show the latest changes. Workaround: Clear the web browser cache.
- WPA3 personal/WPA3 enterprise does not work with iPad mini. Workaround: Configure the security as WPA3 Personal Mixed (WPA3+WPA2) Security.
If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.
Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it's anything but that.
It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.
With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don't miss a single new release.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Top 4 Download periodically updates information of NETGEAR WAC505 Access Point Firmware 9.5.1.2 full driver from the manufacturer, but some information may be slightly out-of-date.
Using warez version of NETGEAR WAC505 Access Point Firmware 9.5.1.2 driver is hazardous. Our driver download links are directly from our mirrors or publisher's website, NETGEAR WAC505 Access Point Firmware 9.5.1.2 torrent files or shared files from free file sharing and free upload services, including Rapidshare, HellShare, HotFile, FileServe, MegaUpload, YouSendIt, MailBigFile, DropSend, MediaMax, zUpload, MyOtherDrive, SendSpace, DepositFiles, Letitbit, LeapFile, DivShare or MediaFire, are not allowed!
It is not recommended to download drivers from illegal sites which distribute a keygens, key generators, pirate keys, serial numbers, warez full versions or cracks for NETGEAR WAC505 Access Point Firmware 9.5.1.2. These drivers might corrupt your computer installation or breach your privacy. A driver might contain a trojan horse opening a backdoor on your computer. Hackers can use this backdoor to take control of your computer, copy data from your computer or to use your computer to distribute viruses and spam to other people.