NETGEAR GS810EMX Switch Firmware 1.7.1.3

Changes:

- New access control feature allows you to block or allow access based on IP addresses.
- Various security fixes and enhancements.

Firmware Upgrade Instruction

- Note: To avoid wireless disconnect issues during the firmware download process, NETGEAR recommends that the firmware upgrade be performed on a computer with a wired connection.
- Write down all the settings that were changed from the default values as you may need to re-enter them manually.
- Download and extract the new firmware to a convenient place such as your desktop.
- Log in to the router using a Web browser.
- Click ADVANCED tab > Administration > Firmware Upgrade.
- Click Browse and find the file you just downloaded.
- Click Upload. Do not interrupt the upgrade while the router does this step.

Important Note:

- The upgrade process is complete when the on screen progress bar completes. If the power LED light turns amber and blinks, power cycle the router to complete the upgrade.
- If the upgrade progress bar on web GUI doesn't display correctly during the firmware upgrade, you can still check the status using the Power LED. The Power LED should be blinking (amber) during firmware upgrade. After the firmware upgrade is complete and the system boots up, it changes to a steady amber color.
- Please DO NOT power off or reboot the device during the firmware upgrade, otherwise, it may result in corrupt firmware and cause the device not to work.

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.