MikroTik RouterOS X86 Firmware 6.47.6

What's new in 6.47.6:

- cap - fixed L2MTU path discovery;
- crs3xx - fixed hardware offloaded LACP bonding on Ethernet interfaces for CRS354 devices;
- crs3xx - fixed switch rules for CRS309 and CRS317 devices (introduced in v6.47.3);
- defconf - fixed default configuration loading on RBmAP-2nD;
- dhcpv4-client - fixed DHCP offer packet parsing with overload option present;
- dhcpv6-server - properly save bindings when executing "make-static" command;
- fetch - improved SSL handshake processing;
- ike1 - allow using "my-id" parameter with XAuth;
- leds - fixed LED type setting;
- lora - expose "joinEui" un "devEui" values in the log;
- lte - fixed multiple APN passthrough on R11e-4G;
- lte - improved EARFCN reporting in 3G and LTE modes on Sierra modems;
- lte - limit allowed APN count to 3 on R11e-LTE;
- mpls - fixed duplicate "LabelRelease" message sending;
- ospf - optimized LSA printing for smaller message sizes;
- radius - added "Service-Type" attribute to Access-Request for IPv4 and IPv6 DHCP servers;
- smips - reduced RouterOS main package size;
- switch - fixed Ethernet padding for small packets;
- user - improved WinBox and The Dude authenticated session handling;
- vrrp - made "password" parameter sensitive;
- w60g - general stability and performance improvements;
- wireless - added support for US FCC UNII-2 and Canada country profiles for NetMetal series devices;
- wireless - fixed incorrect wireless capability information in association response frames;

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn't be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don't always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you're looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don't power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don't miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.