MikroTik RouterOS TILE Firmware 6.46.5

Important note!!!

- The Dude server must be updated to monitor v6.46.4+ and v6.47beta30+ RouterOS type devices.
- The Dude client must be manually upgraded after upgrading The Dude server.
- The Dude requires "winbox" policy instead of "dude" to monitor v6.46.4+ and v6.47beta30+ RouterOS type devices.

MAJOR CHANGES IN v6.46.5:

- user - enable "winbox" policy for groups with "dude" policy;

Changes in this release:

- capsman - fixed "certificate" parameter updating on CAP;
- console - prevent incorrect type interfaces appearing in command hints;
- crs3xx - fixed interface statistics for CRS354-48G-4S+2Q+ and CRS354-48P-4S+2Q+ devices;
- crs3xx - fixed traffic forwarding after disabling/enabling bridge hardware offloading for CRS354-48G-4S+2Q+ and CRS354-48P-4S+2Q+ devices;
- crs3xx - improved SFP+ DAC cable initialization for CRS326-24S+2Q+ device;
- discovery - do not send CDP and LLDP packets on interfaces that does not have MAC address;
- dude - fixed connection to other RouterOS type devices through The Dude agents (introduced in v6.46.4);
- ike1 - rekey phase 1 rekeying as responder for Windows initiators;
- ipsec - improved system stability when handling fragmented packets;
- led - added "dark-mode" functionality for CRS105-5S-FB;
- lora - added IPv6 support for LoRa packet forwarder;
- lora - added UTC timestamp for RX events in "rxpk" json;
- lora - added value limits for "freq-off" parameter;
- lora - properly update source address for packets when routing table is changed;
- lte - fixed IP type selection from APN on RBSXTLTE3-7;
- sniffer - fixed minor typo in "host" menu;
- supout - added "gps" section to supout files;
- supout - improved PoE-out information reporting;
- system - improved kernel panic reporting in logs after reboot;
- system - improved system stability when forwarding traffic from switch chip to CPU (introduced in v6.43);
- traceroute - improved stability when invalid packet is received;
- traffic-generator - improved statistics reporting;
- w60g - improved stability after multiple disconnections;
- winbox - added "Options" parameter support for DHCPv6 client and server;
- winbox - added 160Mhz extension channel support for CAPsMAN;
- winbox - added support for "Tools->WoL" menu;
- winbox - allow setting "20/40/80/160Mhz-eeeeeeCe" channel under "Channel Width" parameter;
- winbox - do not show "Revision" parameter under "System/RouterBOARD" menu on devices that have only one revision;
- winbox - fixed "ARP" parameter inheritance from "CAPs Configuration" configuration;
- winbox - fixed "Bands" parameter display for LTE interfaces;
- winbox - fixed "DSCP" parameter value setting;
- winbox - fixed "Frequency" and "Secondary Frequency" parameter inheritance from "CAPs Channel" configuration;
- winbox - fixed "Passthr. MAC Address" parameter display "LTE APNs" menu;
- winbox - fixed "Switch" menu on CRS354-48P-4S+2Q+;
- winbox - fixed "dst-port" unsetting in "IP->Hotspot->Walled Garden" menu;
- winbox - fixed automatic "IPv6->Firewall->Address List" table update;
- winbox - made "none" the default value for "Security Profile" parameter when creating a new "Wirelees->Connect list" entry;
- winbox - properly show "Hw. Offload Group" value for each interface under "Bridge->Ports" menu;
- winbox - renamed "Memory used" to "HDD used" for HDD type under "Tools->Graphing->Resource Graphs";
- winbox - show "System/RouterBOARD/Mode Button" on devices that have such feature;
- wireless - added "U-NII-2" support for hAP ac2 and RBwAPGR series devices;
- wireless - added "skip-dfs-channels" parameter;
- wireless - fixed default "antenna-gain" setting on SXT 2 and LtAP series devices;
- wireless - updated "bangladesh" regulatory domain information;
- wireless - updated "indonesia4" regulatory domain information;

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn't be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don't always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you're looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don't power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don't miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.