MikroTik RouterOS PPC Firmware 6.44 RC 61

MikroTik RouterOS PPC Firmware 6.44 RC 61

MikroTik RouterOS PPC Firmware 6.44 RC 61 Download Summary

  • File size: 17.60 MB
  • Platform: OS Independent
  • Price: FREE DOWNLOAD
  • Downloads: 141
  • Released: January 20, 2019
  • Manufacturer URL: Mikrotik

MikroTik RouterOS PPC Firmware 6.44 RC 61

Important note!!! Backup before upgrade!

- Due to major IPsec configuration changes in RouterOS v6.44beta39+ (see changelog below), it is advised to make a backup before upgrading. Regular downgrade will still be possible as long as no changes in IPsec peer menu are done.

MAJOR CHANGES IN v6.44:

- cloud - added command "/system backup cloud" for backup storing on cloud (CLI only);
- ipsec - added new "identity" menu with common peer distinguishers;
- ipsec - removed "main-l2tp" exchange-mode, it is the same as "main" exchange-mode;
- ipsec - removed "users" menu, XAuth user configuration is now handled by "identity" menu;
- radius - initial implementation of RadSec (Radius communication over TLS);
- speedtest - added "/tool speed-test" for ping latency, jitter, loss and TCP and UDP download, upload speed measurements (CLI only);
- telnet - do not allow to set "tracefile" parameter;
- upgrade - release channels renamed - "bugfix" to "long-term", "current" to "stable" and "release candidate" to "testing";
- upgrade - "testing" release channel now can contain "beta" together with "release-candidate" versions;

Changes in this release:

- ipsec - added new "identity" menu with common peer distinguishers;
- bridge - fixed BOOTP packet forwarding when DHCP Snooping is enabled;
- certificate - added support for multiple "Subject Alt. Names";
- certificate - enabled RC2 cipher to allow P12 certificate decryption;
- chr - improved system stability when insufficient resources are allocated to the guest;
- console - updated copyright notice;
- crs3xx - fixed slow bootup, upgrade and SFP status read (introduced in v6.44beta20);
- gps - moved "coordinate-format" from "monitor" command to "set" parameter;
- ike1 - fixed "rsa-key" authentication (introduced in v6.44beta);
- ipsec - accept only valid path for "export-pub-key" parameter in "key" menu;
- ipsec - added new "remote-id" peer matcher;
- ipsec - fixed all policies not getting installed after startup (introduced in v6.43.8);
- ipsec - moved "profile" menu outside "peer" menu;
- lcd - made "pin" parameter sensitive;
- led - fixed default LED configuration for RBSXTsq-60ad;
- lte - fixed DHCP IP acquire in 3G mode for r11e-lte (introduced in v6.44beta54);
- lte - fixed reported "rsrq" precision (introduced in v6.43.8);
- profile - removed obsolete "file-name" parameter;
- radius - implemented Proxy-State attribute handling in CoA and disconnect requests;
- rb4011 - improved SFP+ interface linking to 1Gbps;
- ssh - close active SSH connections before IPsec connections on shutdown;
- ssh - fixed public key format compatibility with RFC4716;
- supout - fixed "poe-out" output not showing all interfaces;
- system - accept only valid path for "log-file" parameter in "port" menu;
- system - removed obsolete "/driver" command;
- tr069-client - added "check-certificate" parameter to allow communication without certificates;
- tr069-client - added support for InformParameter object;
- tr069-client - fixed certificate verification for certificates with IP address;
- tr069-client - increased reported "rsrq" precision;
- vrrp - made "password" parameter sensitive;
- winbox - added "allow-dual-stack-queue" parameter in "IP/DHCP Server" and "IPv6/DHCP Server" menus;
- winbox - added "conflict-detection" parameter in "IP/DHCP Server" menu;
- winbox - added "coordinate-format" parameter in LTE interface settings;
- winbox - allow specifying interface lists in "CAPsMAN/Access List" menu;
- winbox - fixed "IPv6/Firewall" "Connection limit" parameter not allowing complete IPv6 prefix lengths;
- winbox - fixed L2MTU parameter setting on "W60G" type interfaces;
- winbox - fixed "LCD" menu not shown on RB2011UiAS-2HnD;
- winbox - moved "Too Long" statistics counter to Ethernet "Rx Stats" tab;
- winbox - show "System/RouterBOARD/Mode Button" on devices that have such feature;

Other changes since v6.43.8:

- bgp - properly update keepalive time after peer restart;
- bridge - added option to monitor fast-forward status;
- bridge - count routed FastPath packets between bridge ports under FastPath bridge statistics;
- bridge - disable fast-forward when using SlowPath features;
- bridge - fixed DHCP Option 82 parsing when using DHCP Snooping;
- bridge - fixed packet forwarding when changing MSTI VLAN mappings;
- bridge - fixed possible memory leak when using MSTP;
- bridge - improved packet processing when bridge port changes states;
- btest - added multithreading support for both UDP and TCP tests;
- btest - added warning message when CPU load exceeds 90% (CLI only);
- capsman - always accept connections from loopback address;
- certificate - fixed certificate signing by SCEP client if multiple CA certificates are provided;
- chr - assign interface names based on underlying PCI device order on KVM;
- cloud - added "ddns-update-interval" parameter;
- cloud - do not reuse old UDP socket if routing changes are detected;
- cloud - ignore "force-update" command if DDNS is disabled;
- cloud - improved DDNS service disabling;
- cloud - made address updating faster when new public address detected;
- conntrack - added new "loose-tcp-tracking" parameter (equivalent to "nf_conntrack_tcp_loose" in netfilter);
- console - renamed IP protocol 41 to "ipv6-encap";
- crs317 - fixed packet forwarding when LACP is used with hw=no;
- crs317 - fixed TX not working on sfp-sfpplus9 interface (introduced in v6.40beta12);
- crs328 - fixed SFP+ interface linking on CRS328-24P-4S+RM (introduced in v6.44beta17);
- crs3xx - improved fan control stability;
- crs3xx - improved stability when adding ACL rules on CRS326 and CRS328 devices (introduced in 6.44beta39);
- defconf - fixed configuration not generating properly on upgrade;
- defconf - fixed default configuration loading on RB4011iGS+5HacQ2HnD-IN;
- defconf - fixed IPv6 link-local address range in firewall rules;
- dhcp - added "allow-dual-stack-queue" setting for IPv4/IPv6 DHCP servers to control dynamic lease/binding behaviour;
- dhcp - properly load DHCP configuration if options are configured;
- dhcpv4-server - added "parent-queue" parameter (CLI only);
- dhcpv4-server - added "User-Name" attribute to RADIUS accounting messages;
- dhcpv4-server - fixed service becoming unresponsive after interface leaves and enters the same bridge;
- dhcpv6-client - use default route distance also for unreachable route added by DHCPv6 client;
- dhcpv6-server - allow to add DHCPv6 server with pool that does not exist;
- dhcpv6-server - improved DHCPv6 server stability when using "print" command;
- discovery - detect proper slave interface on bounded interfaces;
- discovery - fixed malformed neighbor information for routers that has incomplete IPv6 configuration;
- discovery - send master port in "interface-name" parameter;
- discovery - show neighbors on actual bridge port instead of bridge itself for LLDP;
- e-mail - added info log message when e-mail is sent successfully;
- ethernet - fixed IPv4 and IPv6 packet forwarding on IPQ4018 devices;
- ethernet - fixed linking issues on wAP ac, RB750Gr2 and Metal 52 ac (introduced in v6.43rc52);
- ethernet - fixed VLAN1 forwarding on RB1100AHx4 and RB4011 devices;
- ethernet - improved per core ethernet traffic classificator on mmips devices;
- export - fixed "silent-boot" compact export;
- fetch - added "homepage" parameter;
- fetch - fixed fetching with "as-value" creating an empty file (introduced in v6.44beta20);
- fetch - fixed "without-paging" option;
- health - improved fan control stability on CRS328-24P-4S+RM;
- ike2 - added option to specify certificate chain;
- ike2 - added peer identity validation for RSA auth (disabled after upgrade);
- ike2 - allow to match responder peer by "my-id=fqdn" field;
- ike2 - fixed local address lookup when initiating new connection;
- ike2 - improved subsequent phase 2 initialization when no childs exist;
- ike2 - properly handle certificates with empty "Subject";
- ike2 - send split networks over DHCP (option 249) to Windows initiators if DHCP Inform is received;
- ike2 - show weak pre-shared-key warning;
- ipsec - added account log message when user is successfully authenticated;
- ipsec - added basic pre-shared-key strength checks;
- ipsec - allow to specify single address instead of IP pool under "mode-config";
- ipsec - fixed active connection killing when changing peer configuration;
- ipsec - fixed stability issues after changing peer configuration (introduced in v6.43);
- ipsec - hide empty prefixes on "peer" menu;
- ipsec - improved invalid policy handling when a valid policy is uninstalled;
- ipsec - made dynamic "src-nat" rule more specific;
- ipsec - made peers autosort themselves based on reachability status;
- ipsec - properly detect AES-NI extension as hardware AEAD;
- ipsec - removed limitation that allowed only single "auth-method" with the same "exchange-mode" as responder;
- kidcontrol - added IPv6 support;
- kidcontrol - added "reset-counters" command for "device" menu (CLI only);
- kidcontrol - added statistics web interface for kids (homepage
- kidcontrol - added "tur-fri", "tur-mon", "tur-sat", "tur-sun", "tur-thu", "tur-tue", "tur-wed" parameters (CLI only);
- kidcontrol - dynamically discover devices from DNS activity;
- kidcontrol - fixed validation checks for time intervals;
- kidcontrol - properly detect time zone changes;
- l2tp - fixed IPsec secret not being updated when "ipsec-secret" is changed under L2TP client configuration;
- led - fixed default LED configuration for wAP 60G AP devices;
- led - fixed PWR-LINE AP Ethernet LED polarity ("/system routerboard upgrade" required);
- lte - added additional ID support for Novatel USB730L modem;
- lte - added "cell-monitor" command for R11e-LTE international modem (CLI only);
- lte - added "ecno" field for "info" command;
- lte - added "firmware-upgrade" command for R11e-LTE international modems (CLI only);
- lte - added initial support for multiple APN for R11e-4G (new modem firmware required);
- lte - added support for JioFi JMR1040 modem;
- lte - fixed connection issue when LTE modem was de-registered from network for more than 1 minute;
- lte - fixed DHCP IP acquire (introduced in v6.43.7);
- lte - fixed DHCP relay packet forwarding when in passthrough mode;
- lte - fixed IPv6 activation for R11e-LTE-US modems;
- lte - fixed Jaton/SQN modems preventing router from booting properly;
- lte - fixed LTE interface not working properly after reboot on RBSXTLTE3-7;
- lte - fixed missing running flag for Jaton LTE modems;
- lte - improved compatibility for Alt38xx modems;
- lte - improved SimCom 7100e support;
- netinstall - do not show kernel failure critical messages in the log after fresh install;
- port - improved "remote-serial" TCP performance in RAW mode;
- ppp - added "at-chat" command;
- profiler - classify kernel crypto processing as "encrypting";
- proxy - removed port list size limit;
- rb3011 - implemented multiple engine IPsec hardware acceleration support;
- rbm33g - improved stability when used with some USB devices;
- romon - improved reliability when processing RoMON packets on CHR;
- routerboard - removed "RB" prefix from PWR-LINE AP devices;
- routerboard - require at least 10 second interval between "reformat-hold-button" and "max-reformat-hold-button";
- sniffer - save packet capture in "802.11" type when sniffing on w60g interface in "sniff" mode;
- snmp - added "dot1qPortVlanTable" and "dot1dBasePortTable" OIDs;
- snmp - changed fan speed value type to Gauge32;
- snmp - fixed "rsrq" reported precision;
- snmp - fixed w60g station table;
- snmp - removed "rx-sector" ("Wl60gRxSector") value;
- snmp - report bridge ifSpeed as "0";
- ssh - added "allow-none-crypto" parameter to disable "none" encryption usage (CLI only);
- ssh - added error log message when key exchange fails;
- ssh - fixed non-interactive shell not returning all output (introduced in v6.44);
- ssh - fixed single command execution (introduced in v6.44beta9);
- switch - fixed ACL rules on IPQ4018 devices;
- tr069-client - fixed HTTP cookie getting duplicated with the same key;
- traceroute - improved stability when sending large ping amounts;
- traffic-flow - reduced minimal value of "active-flow-timeout" parameter to 1s;
- tunnel - properly clear dynamic IPsec configuration when removing/disabling EoIP with DNS as "remote-address";
- upgrade - made security package depend on DHCP package;
- usb - improved power-reset error message when no bus specified on CCR1072-8G-1S+;
- userman - show redirect location in error messages;
- user - require "write" permissions for LTE firmware update;
- w60g - added "10s-average-rssi" parameter to align mode (CLI only);
- w60g - added align mode "/interface w60g align" (CLI only);
- w60g - fixed scan in bridge mode;
- w60g - improved PtMP performance;
- w60g - improved reconnection detection;
- w60g - improved "tx-packet-error-rate" reading;
- w60g - renamed disconnection message when license level did not allow more connected clients;
- w60g - renamed "frequency-list" to "scan-list";
- watchdog - allow specifying DNS name for "send-smtp-server" parameter;
- winbox - added 4th chain selection for "HT TX chains" and "HT RX chains" under "CAPsMAN/CAP Interface/Wireless" tab;
- winbox - added "challenge-password" field when signing certificate with SCEP;
- winbox - added "conflict-detection" parameter in "IP/DHCP server" menu;
- winbox - added "radio-name" setting to "CAPsMAN/CAP Interface/General" tab;
- winbox - added "secondary-channel" setting to "CAPsMAN/CAP Interface/Channel" tab;
- winbox - added src/dst address and in/out interface list columns to default firewall menu view;
- winbox - added support for dynamic devices in "IP/Kid Control/Devices" tab;
- winbox - allow setting "network-mode" to "auto" under LTE interface settings;
- winbox - fixed missing w60g interface status values;
- winbox - show "R" flag under "IPv6/DHCP Server/Bindings" tab;
- winbox - show "W60G" wireless tab on wAP 60G AP;
- wireless - added new "installation" parameter to specify router's location;
- wireless - improved signal strength at low TX power on LHG 5 ac, LHG 5 ac XL and LDF 5 ac ("/system routerboard upgrade" required);
- wireless - improved system stability for all ARM devices with wireless;
- wireless - removed G/N support for 2484MHz in "japan" regulatory domain;
- wireless - report last seen IP address in RADIUS accounting messages;
- wireless - show indoor/outdoor frequency limitations under "/interface wireless info country-info " command;

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn't be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don't always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you're looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don't power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don't miss the update that will improve your device.

MikroTik RouterOS PPC Firmware 6.44 RC 61 Bookmark

Hyperlink code:
Hyperlink for Forum code:

MikroTik RouterOS PPC Firmware 6.44 RC 61 Drivers Download Notice

Top 4 Download periodically updates information of MikroTik RouterOS PPC Firmware 6.44 RC 61 full driver from the manufacturer, but some information may be slightly out-of-date.

Using warez version of MikroTik RouterOS PPC Firmware 6.44 RC 61 driver is hazardous. Our driver download links are directly from our mirrors or publisher's website, MikroTik RouterOS PPC Firmware 6.44 RC 61 torrent files or shared files from free file sharing and free upload services, including Rapidshare, HellShare, HotFile, FileServe, MegaUpload, YouSendIt, MailBigFile, DropSend, MediaMax, zUpload, MyOtherDrive, SendSpace, DepositFiles, Letitbit, LeapFile, DivShare or MediaFire, are not allowed!

It is not recommended to download drivers from illegal sites which distribute a keygens, key generators, pirate keys, serial numbers, warez full versions or cracks for MikroTik RouterOS PPC Firmware 6.44 RC 61. These drivers might corrupt your computer installation or breach your privacy. A driver might contain a trojan horse opening a backdoor on your computer. Hackers can use this backdoor to take control of your computer, copy data from your computer or to use your computer to distribute viruses and spam to other people.