1. Format-free feature added (image quality option removed)
2. V-out PIP function scenario change
3. System stabilization
1. Download the firmware file.
2. Back up important data then format the SD card through Lukas viewer.
(Those who use 64/128GB memory cards, format through Lukas viewer or dash cam device)
3. Copy and paste unzipped all download files into the SD card.
4. Start a car engine. (To prevent power cut-off while updating)
5. Insert SD card to dash cam then turn dash cam power on.
6. LED on the left bottom of dash cam blinks and update starts. (takes about 4 minutes)
7. The update is complete.
Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.
On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.
It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.
This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.
When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.
However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.
That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.
It is highly recommended to always use the most recent driver version available
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games
Try to set a system restore point before installing a device driver
This will help if you installed a wrong driver
Problems can arise when your hardware device is too old or not supported any longer
Top 4 Download periodically updates information of LUKAS LK-7950 WD Dash Cam Firmware Non-OBD Fi21 full driver from the manufacturer, but some information may be slightly out-of-date.
Using warez version of LUKAS LK-7950 WD Dash Cam Firmware Non-OBD Fi21 driver is hazardous. Our driver download links are directly from our mirrors or publisher's website, LUKAS LK-7950 WD Dash Cam Firmware Non-OBD Fi21 torrent files or shared files from free file sharing and free upload services, including Rapidshare, HellShare, HotFile, FileServe, MegaUpload, YouSendIt, MailBigFile, DropSend, MediaMax, zUpload, MyOtherDrive, SendSpace, DepositFiles, Letitbit, LeapFile, DivShare or MediaFire, are not allowed!
It is not recommended to download drivers from illegal sites which distribute a keygens, key generators, pirate keys, serial numbers, warez full versions or cracks for LUKAS LK-7950 WD Dash Cam Firmware Non-OBD Fi21. These drivers might corrupt your computer installation or breach your privacy. A driver might contain a trojan horse opening a backdoor on your computer. Hackers can use this backdoor to take control of your computer, copy data from your computer or to use your computer to distribute viruses and spam to other people.
Download Now
Update All Drivers