Lexmark MS822 MFP Firmware MSTGW.074.258/GW.075.E007

Field Issues Addressed and Other Improvements:

- Fix for an intermittent 912.76 error on CS32x-CS72x and CX32x-CX72x Series printers when printing narrow media
- Resolve an issue on CS92x and CX92x Series printers where the device intermittently fails to print after waking from sleep
- Fix an issue where device is unable to send Job Accounting emails but successfully sends other emails
- Added support for a hardware change in scanner ADF’s
- Improve Fax Over IP phone system compatibility
- Fix for an issue where faxes were repeatedly redialing/busy in some countries where devices were running firmware versions 073.230 thru 074.252
- Change paper side being printed of the last page of a duplex job with an odd number of pages to print on the correct side of a non-plain paper
- Fix for an intermittent issue that prevented successful scanning to Box using Cloud Connector until device is rebooted
- Eliminated causes for several 900.00 errors
- Enable updating of scanner firmware for CX92x Series printers
- Update staple supply information on reports
- Improved translations for some messages

Firmware upgrade warning:
- It may take up to 20 minutes to update devices to FW7 code if the code level currently on the device is FW2 or FW3 based
- This is a one-time issue transitioning the device from FW2 or FW3 to FW7
- To know if the device is currently running FW2 or FW3 based code, check the firmware version on the device. FW2 and FW3 based code will have the following version format: ATL.03x.yyy or ATL.02x.yyy, CB.03x.yyy or CB.02x.yyy, PP.03x.yyy or PP.02x.yyy, YK.03x.yyy or YK.02x.yyy

Firmware upgrade procedure:

- Devices running ATL.03x.yyy or ATL.02x.yyy firmware (CS72x/CX72x and equivalents) must first update to an intermediate release before updating to FW7
- The intermediate release needed is CSTAT.041.090 or CXTAT.041.090, from there the firmware can be updated directly to FW7
- Contact Lexmark Technical Support to obtain this release

Firmware downgrade warning:

- It is strongly recommended that a firmware downgrade is NOT performed.
- Downgrading firmware from newer major firmware ECs to older major firmware ECs will result in the loss of Apps, Security Features, and Settings.
- Contact Lexmark Technical Support and see KB Article SO8017 for more information on the impacts of downgrading.
- Ensure the firmware you download is the correct one for the product you have

Understanding firmware nomenclature:

Beginning with FW4, firmware versions are named in the pattern ABCDD.xxy.zzz where:
- A tells whether the printer is Mono or Color (M = mono, C = color)
- B tells whether the printer is Single or Multi function (S = single function printer (SFP), X = multi function printer (MFP))
- C tells whether the UI is a touch screen, non-touch or “lite feature set” (T = touch screen, 4.3” or larger screen, N = non-touch screen and non-lite, L = lite )
- DD tells the model family
- xx tells the major firmware EC version, while y tells the minor firmware EC version (050 = FW5.0, 051 = FW5.1, etc)
- zzz tells the release number within that firmware EC
- FW2 or FW3 firmware versions are named in the pattern DD.xxy.zzz using the same mapping as above. However, the DD model families used on FW2 and FW3 were changed on FW4 and newer: ATL on FW2 and FW3 becomes AT on FW4 and newer, CB on FW2 and FW3 becomes AT on FW4 and newer, YK on FW2 and FW3 becomes PP on FW4 and newer
- Ensure the firmware you download is the correct one for the product you have 

About Print and Scanner Bundle Packages:

This package includes several drivers required by imaging devices, such as Printer Command Language (PCL), PostScript (PS), XML Paper Specification (XPS), Scanner, Printer, TWAIN, and other related software.

With them installed, systems will be able to recognize the imaging device properly, and to make use of all its advanced features and functions.

To initiate the installation, first make sure this release is compatible with your device model and system configuration. Once that out of the way, get the downloadable package, extract it if necessary, run the available installer(s), and follow the instructions displayed on-screen for a complete and successful installation.

After the installation has finished, don't forget to perform a system reboot to allow all changes to take effect properly.

Please note that, even though other OSes might be suitable, it is not advisable that you install this version on other platforms than those specified.

Therefore, click the download button, get the bundle package, and apply it on your system. Also check back our website whenever possible, in order to stay up to speed with latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.