Leica M (Typ 262) Camera Firmware 1.0.0.6

Performance Improvements:

- Implemented optimizations that prevent the camera controls from becoming unresponsive after a series of continuous burst photos fills the buffer.
- The selected user profile will be displayed even when exposure compensation has been adjusted. Exposure compensation is no longer saved to the user profile.
- Memory cards with a capacity up to 512 GB are supported
- The default file format settings upon camera reset have been changed from „JPG“ to „DNG+JPG“
- The time-out period for the last GPS Position, when no GPS signal is received, has been extended to 2.5 hours (GPS is not available with M (Typ 262))
- It is now possible to display DNG files from the Leica M Monochrom (Typ 246) in all zoom steps, also with the M/M-P (Typ 240 and 262)
- When using SD-cards that are too slow for movie recording, a message appears in the viewfinder display

Bug Fixes:

- Bugs, that led to a camera freeze when shooting fast sequences, have been fixed
- The accuracy of the internal clock has been improved
- When using „AUTO ISO in M mode“ the used exposure metering mode is now being displayed in play mode
- Files larger than 2GB can now be transferred from the camera to the PC via USB
- The display of the histogram has been optimized for high ISO values
- The display of flash exposure compensation values has been improved in the menu
- A misleading message (“check battery age”) has been removed
- In case of Leica M Monochrom (Typ 246): A bug that led to black pixels in fine pattern has been fixed
- Further system optimizations have been implemented

Firmware Update Procedure:

- Format an SD memory card in your Leica M.
- Turn off the camera and insert the card into an SD card reader – either integrated or connected to your computer. (A reader is required for Firmware updates).
- Download the Firmware file from the Leica M site using the Service & Support/Support/Downloads menu.
- Save the Firmware file at the top level of the card’s folder structure.
- Remove the card properly from your card reader, insert the card into the camera and close the bottom cover.
- Press the “INFO” button and hold it, simultaneously turn on the camera using the main switch.
- The update process takes several 2-4 minutes. “Loading file...” appears on the screen.
- When the update is done, a corresponding message appears on the screen. The Message disappears after some seconds.

CAUTION:

- Please do not turn off your camera, or do not remove the SD Memory Card, do not remove the lens while updating your camera's firmware.
- DOING SO CAN CAUSE A SERIOUS DAMAGE TO YOUR CAMERA!
- When installing the new Firmware version, all user profiles will be deleted and need to be set again after the new firmware is installed. We recommend taking note of the specific settings before updating.
- If the battery does not have sufficient charge, you will see a corresponding warning message.

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.