Intel VRN2208WAF8 Server System BIOS/Firmware 01.01.1029

Versions:

- System BIOS - 01.01.1029
- ME Firmware - 03.01.03.072
- BMC Firmware - 01.61.12390
- FRUSDR - 01.19

BIOS 01.01.1029 Changes:

- Failed to set BIOS Knobs using syscfg /bcs and syscfg /r only in OS level.

BMC Firmware 1.61.12390 Changes:

- 2103633529:[BMC]The “KVM &Media” and “SMASH CLP port” values is empty if checked by user privilege.
- 2103633537:[BMC] Hot key "Alt+R" is no function under full screen mode with iKVM.
- Fix BDBA reported kernel CVEs that cannot be triaged.

ME Firmware 03.01.03.072 Changes:

- QSR PSIRT-TA-201901-002

FRUSDR 01.19 Changes:

- Add KCS Ctrl Mode sensor.
Update new FRUSDR utility (FRUSDR_V14_1_Build18_AllOS).

BIOS RECOVERY INSTRUCTIONS

1. Power OFF the system
2. Switch the recovery jumper. Details regarding the jumper ID and location
can be obtained from the Server Board TPS for that Platform
3. Power ON the system
4. The BIOS POST screen will appear displaying the progress and the system
will automatically boot to the EFI SHELL
5. Follow the BIOS recovery update manual for BIOS recovery.

Update Procedure

- Unzip the contents of the update package and copy all files to the root directory on a USB flash drive
- Insert the USB flash drive to any available USB port on the server system to be updated
- Power on the server
- The system will automatically access the uEFI shell and begin the update process.

Or

- If the files were copied to a folder other than the root, Boot the Server to
the uEFI shell. This can be accessed via the BIOS setup utility during
POST or via the Boot Menu accessed during POST.
- Run the command "map -r" in the uEFI shell to mount the USB flash drive
- Run the command "fs0:" to change folders to the USB flash drive. The USB
flash drive may also mount to fs1: depending on other installed devices. The
number of "fs#" is dependent on the result of command "map -r"
- Change folders to the folder holding the update package files and manually
start the "Startup.nsh" script file to start loading all updates
- Reboot the system after the update process has successfully completed

Verifying Updates:

- During POST, hit the Key when prompted to access the BIOS Setup Utility
- From the BIOS Setup Utility main menu, Hit the key to load BIOS Defaults
- At the MAIN menu verify the BIOS revision is correct
- Move cursor to the SERVER MANAGEMENT Menu
- Move cursor down to the SYSTEM INFORMATION Option and hit Enter
- Verify the BMC Firmware revision is correct
- Verify the SDR revision is correct
- Verify the ME Firmware revision is correct
- Configure desired BIOS Option settings
- Hit the F10 Key to save changes and Exit

About OS Independent BIOS:

Although installing a newer BIOS version might add new features, update various components, or improve the device’s usability, this process is very risky, so the upgrade is recommended to be performed only when it is really needed.

In addition to that, this task should be performed by someone who has the knowledge to successfully complete the installation; regular users may fulfill it at their own risk.

Bear in mind that failing to perform a successful installation could seriously damage your device, and the faulty BIOS resulted from the process might even render it unusable.

About BIOS Update Utility:

The Basic Input/Output System (BIOS) is a highly important piece of software that loads the currently installed operating system and tests all hardware components – so make sure you flash it correctly.

When it comes to changing the BIOS version, the update utility searches for a compatible package in any given location or on the web and, if found, it will automatically install the desired build, if and when your approval is given.

Do take into account that failing to perform the installation could seriously damage your system, and the faulty BIOS might even render it unusable.

Therefore, if you intend to upgrade your BIOS, hit the download button, get and install the package, and run the utility to check if a newer version is available. Don’t forget to check with our website as often as possible to be up to date with the latest releases.

About Firmware Updates:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device's functionality in the event of a software update either turning up faulty or causing the unit's overall performance to drop. However, bear in mind that applying an older firmware isn't recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it's best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device's firmware. Also make sure you constantly check with our website to ensure that you don't miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.