- System BIOS - 2X.01.0062
- ME Firmware - 04.03.03.260
- BMC Firmware - Purley_2.21.3b847efd
- FRUSDR - S9200WK_0.22_FRUSDR
- EWS: It can not send the SNMP alert packages to destination IP
- Unable to change property "BootSourceOverrideEnabled" from "Continuous" to "Disabled"
- Username or password length is abnormal when create or modify.
- BMC Session ID hijacking flaw
- The latest BMC has no event log on EWS
- Username or password length is abnormal when create or modify
- Cannot change BMC KCS mode in BMC force-update mode.
- User configuration page is hidden after setting BMC KCS to Restricted Mode
- Single reboot to update BIOS, FD, ME & BMC: Current design requries 3 reboots to update FD, BIOS and ME. Unacceptable customer experience. Need to reduce to one boot only.
- Restrict Update Nvram support for DC requirement
- OOB update caused system be in reboot loop under restricted/Deny all mode
- All BIOS knobs impacted by KCS will show up when load BIOS default via pressing F9 under Restricted/Deny All Mode
- Sensor failure-LBG Temp – Asserted during OOB ME FW update from EWS.
- There is unsupported BIOS Variable Value “Serial Port B” for Console Redirection on Server Management of EWS.
- There are 7 PSIRT BIOS security issues reported on R15 code base
- BIOS / ME / FD image still can be updated via OOB feature when the mismatch type is selected
- ME Update system reset when using OFU build 14.1 Build 21 with WW18 BKC - same on WFP
- DIMM Thrm Mrgn 5,6,7,8 sensors showing "no reading" state.
- VDDQ tolerance changed to +/- 17.5%
- VCCIO tolerance changed to +/-17%
- 5VSby tolerance changed to +/-14%
- Averaging set to enable for each power rail sensing.
1. Unzip the contents of the update package and copy all files to the root directory of a removable media (USB flash drive)
2. Insert the USB flash drive to any available USB port on the system to be updated
3. Power on the server and load the uEFI shell
4. Begin the update process running the Startup.nsh
5. Reboot the system after the update process has successfully completed
1. Unzip the package onto your system
2. Log into the BMC web GUI
3. Navigate to Configuration, then Firmware Update
4. Click browse, and direct the browser to the location of Purley_1.04.f80688d0.bin
5. Click upload. Progress and status will be shown as the update progresses
1. Unzip package and load onto a flash drive
2. Boot to UEFI shell, and navigate to the folder where this package lives
3. Run fwUpdateBMC.nsh and follow the prompts
01. After the final update has completed successfully, reboot the system
02. During POST, hit the
03. From the BIOS Setup Utility main menu, hit the
04. Hit the
04. At the main menu verify the BIOS revision is correct
05. Move cursor to the SERVER MANAGEMENT menu and hit Enter
06. Move cursor to the SYSTEM INFORMATION Option and hit Enter
07. Verify the BMC Firmware revision is correct
08. Verify the SDR revision is correct
09. Verify the ME Firmware revision is correct
10. Configure desired BIOS Option settings
11. Hit the F10 Key to Save Changes and Exit
Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.
On the other hand, downgrading the firmware version can recover the device's functionality in the event of a software update either turning up faulty or causing the unit's overall performance to drop. However, bear in mind that applying an older firmware isn't recommended and might not always be possible.
When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.
As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it's best that this task be performed in a steady power environment such as the one ensured by a UPS unit.
Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device's firmware. Also make sure you constantly check with our website to ensure that you don't miss a single new release.
Top 4 Download periodically updates information of Intel S9248WK2HLC Server System UEFI SUP 2X.01.0062 full driver from the manufacturer, but some information may be slightly out-of-date.
Using warez version of Intel S9248WK2HLC Server System UEFI SUP 2X.01.0062 driver is hazardous. Our driver download links are directly from our mirrors or publisher's website, Intel S9248WK2HLC Server System UEFI SUP 2X.01.0062 torrent files or shared files from free file sharing and free upload services, including Rapidshare, HellShare, HotFile, FileServe, MegaUpload, YouSendIt, MailBigFile, DropSend, MediaMax, zUpload, MyOtherDrive, SendSpace, DepositFiles, Letitbit, LeapFile, DivShare or MediaFire, are not allowed!
It is not recommended to download drivers from illegal sites which distribute a keygens, key generators, pirate keys, serial numbers, warez full versions or cracks for Intel S9248WK2HLC Server System UEFI SUP 2X.01.0062. These drivers might corrupt your computer installation or breach your privacy. A driver might contain a trojan horse opening a backdoor on your computer. Hackers can use this backdoor to take control of your computer, copy data from your computer or to use your computer to distribute viruses and spam to other people.
Download Now
Update All Drivers