Intel S9232WK1HLC Server System Onboard Network Driver 26.2 for Linux

Changes:

- Support for FreeBSD 12.2
- Drivers and software are no longer tested on FreeBSD 12.1

Intel 700 Series Changes:

- Linux driver: Express Data Path - On the newest Kernels system hang might be observed after eBPF program has been loaded.
- Linux driver: Driver reload or unbind and bind driver on an Intel Ethernet Converged Network Adapter X710 may cause link down on first port after reboot.
- Linux driver: rx_errors counter double-counts some packets when traffic doesn't pass Cyclic Redundancy Check (CRC).
- Linux driver: Link may be lost after changing MAC address on Physical Function (PF) using Intel Ethernet Network Adapter X722.
- Intel Ethernet Flash Firmware Utility: One of the ports of Intel Ethernet Network Adapter X710-T2L may not be initialized when using Intel Ethernet Flash Firmware Utility. 

To install this package please do the following:

- Save the downloadable package on an accessible location (such as your desktop).
- Unzip the file and enter the newly-created directory.
- Locate and double-click on the available setup file.
- Allow Windows to run the file (if necessary).
- Read EULA (End User License Agreement) and agree to proceed with the installation process.
- Follow the on-screen instructions.
- Close the wizard and perform a system reboot to allow changes to take effect. 

About Network Adapter Drivers:

When connected, the operating system usually installs a generic driver that helps the computer to recognize the newly attached device.

However, proper software must be applied if you want to make use of all features that the network adapter has available. This task also allows computers to properly recognize all device characteristics such as manufacturer, chipset, technology, and others.

Updating the adapter's drivers and utilities version might improve overall performance and stability, increase transfer speeds, fix different compatibility problems and several network-related errors, as well as bring various other changes.

To install this release, simply get the package, extract it if necessary, run the setup, and follow the instructions displayed on-screen. When done, don't forget to perform a system restart and reconnect the network adapter to make sure that all changes take effect properly.

Without further ado, if you intend to apply this version, click the download button and install the package. Moreover, check with our website as often as possible so that you don't miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.