Intel S2600CWTR Server Board BIOS/Firmware 1.01.0019

Versions:

- System BIOS - R01.01.0019

- ME Firmware - 03.01.03.032

- BMC Firmware - 01.47.10181

- FRUSDR - 1.14

BMC Firmware:

- The HSBP's FRU can't be detected if install 4 HSBP in S2600WT system.

- Ping LAN1 (BMC management) IP failure after AC off/on sometimes with RoHS BB.

- HSBP3 sensors can not be accessed and shown as Unknown because of SDR auto-configuration failure

- Vulnerabilities found on BMC_i_0146r9961

- BMC Ethernet hang issue in some case

- BMC alerts received in an email via SMTP have a different time

- BMC EWS Security settings issue (Bad password threshold)

- Fix issue of second CPU dump when IERR happened and first CPU dump failed, Use PCH command to trigger warm reset, Increase handshake timeout with BIOS

- Fix "No SEL is added when FM_MEM_THERM_EVENT_N is grounded."

- Updated the stunnel conf to support TLSv1.2 only, with secured ciphers <= 128

- CCB 460: enable adoption of A1u2ULCP on S2600WT

- CCB 468: address the cipher suite zero vulnerability.

- update PSoC to version 1.25

- update SDR file for S2600WT thermal alert issue

System Firmware Update Package Usage instructions

This package can be updated using one of the following methods:

- Windows or Linux operating system using Intel One-boot Flash Update (OFU) V13.1 Build 13

- Windows Preboot Execution Environment (WinPE)

To update from Windows and Linux or operating systems using the Intel One Boot

- Flash Update Utility (OFU)

Use OFU to update system firmware by the following steps:

- Install OFU on Windows or Linux system

- Download the latest firmware update package from homepage

- Unzip package to a folder

- Run the following command in Windows command line/Linux terminal window: :flashupdt -u flashupdt.cfg

To update from Windows Preboot Execution Environment (WinPE)

The System Firmware Update Package can be inserted to Windows PE customized image for creating a bootable Windows PE CD. User is able to update system firmware from customized WinPE CD by the following steps:

- Boot server with customized WinPE CD

- Run script "WinPE21_x64_Update.bat" or "WinPE20_x86_Update.bat" (name may be varied depends on your own customization)

Update Procedure:

- Unzip the contents of the update package and copy all files to the root directory on a USB flash drive

- Insert the USB flash drive to any available USB port on the server system to be updated

- Power on the server

- The system will automatically access the uEFI shell and begin the update process.

Or

- If the files were copied to a folder other than the root, Boot the Server to the uEFI shell. This can be accessed via the BIOS setup utility during POST or via the Boot Menu accessed during POST.

- Run the command "map -r" in the uEFI shell to mount the USB flash drive

- Run the command "fs0:" to change folders to the USB flash drive. The USB flash drive may also mount to fs1: depending on other installed devices. The number of "fs#" is dependent on the result of command "map -r"

- Change folders to the folder holding the update package files and manually start the "Startup.nsh" script file to start loading all updates

- Reboot the system after the update process has successfully completed

Verifying Updates:

- During POST, hit the Key when prompted to access the BIOS Setup Utility

- From the BIOS Setup Utility main menu, Hit the key to load BIOS Defaults

- At the MAIN menu verify the BIOS revision is correct

- Move cursor to the SERVER MANAGEMENT Menu

- Move cursor down to the SYSTEM INFORMATION Option and hit Enter

- Verify the BMC Firmware revision is correct

- Verify the SDR revision is correct

- Verify the ME Firmware revision is correct

- Configure desired BIOS Option settings

- Hit the F10 Key to save changes and Exit

About ME Firmware:

If you wish to apply this ME (Management Engine) Firmware version, you should first make sure that the version number matches your AMT (Active Management Technology) family, as each update is specifically developed for certain system configurations.

While this technology is mostly associated with enterprises, it can also be used by various IT administrators as well as regular users. However, bear in mind that even though other platforms might also be compatible, we do not recommend installing this release on OSes other than the specified ones.

In order to apply this package, it would be best if you carefully read and understand the instructions provided by your computer manufacturer, and perform the update only when you have completely familiarized yourself with the steps.

In addition to that, make sure you perform a system reboot after upgrading the firmware version in order to allow all changes to take effect properly.

About OS Independent BIOS:

Although installing a newer BIOS version might add new features, update various components, or improve the device’s usability, this process is very risky, so the upgrade is recommended to be performed only when it is really needed.

In addition to that, this task should be performed by someone who has the knowledge to successfully complete the installation; regular users may fulfill it at their own risk.

When it comes to applying a new version without taking into account the computer’s operating system, the most commonly used method to flash the BIOS is by creating a bootable USB or CD containing the update file, and running it from DOS.

Still, regardless of the method used or whether the upgrade is performed by a regular or power user, it’s recommended that the new BIOS be applied in a steady power environment such as the one ensured by a UPS unit.

The Basic Input/Output System (BIOS) is a very important software that loads the currently installed OS, and tests all of the system’s hardware components – so make sure you flash it correctly.

Bear in mind that failing to perform a successful installation could seriously damage your device, and the faulty BIOS resulted from the process might even render it unusable.

About Firmware Updates:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.