Intel R1208WT2GSR Server System SEL Viewer Utility 14.1.32

The System Event Log (SEL) viewer utility is used for displaying data from the Integrated BMC's system event log.

Change List:

- Build 32: KW issues fixed
- Build 29: CCB3245 Support AMT and PPR sel log translation
- Build 28: Fix 1507913147 - parse unknown event of NM capabilities
- Build 28: Change naming _temp.efi to _core.efi
- Build 27: Support SLES15&Sp1
- Build 27: Fix 1507873591 - Display issue on tool SELView when thermal margin event reported
- Build 27: Fix 16010873466 - Using Selview utility, displays unknown event in GUI event description for cooling device
- Build 26: Fix 2103630284 - Change BIOS configuration value through OOB, but show as "Unknown Event" in SEL
- Build 25: Enable new build variant of linux to support RHEL8 64bit
- Build 24: Fix incorrect memory ECC SEL translation on WKP
- Build 23: Fix BMC KCS privilege issue
- Build 22: Add OOB SEL translation
- Build 21: Update address parity error SEL translation
- Build 21: Support new SKU
- Build 20: Rebuild for Windows
- Build 19: Add deb package for Debian
- Build 18: Change DIMM index from 0-based to 1-based
- Build 17: Support new SKU
- Build 16: Fix SEL translation from System Firmware Progress sensors
- Build 15: Support FPGA-relative SEL translation
- Build 14: Support new BMC version format in SEL
- Build 13: Support new SKU and Fix a SEL translation defect for "AutoCfg Status".
- Build 12: Support new SKU
- Build 11: Fix SEL severity mismatch issue for "SPS FW Health" and Fix exception hang issue under EFI shell
- Build 10: Fix SEL translation defect for DIMM location
- Build 9: Fix SEL translation typo of "PCI Express Bad TLP" and Use 1 byte GID for SEL translation
- Build 8: Fix GUI hang issue in UEFI shell and Support SSB thermal trip SEL
- Build 7: Support a new SKU and Update supported OS list
- Build 6: Fix a defect about SEL full warning message in Selviewer GUI.

Supported Platforms

- Intel Server Board based on Intel Xeon Scalable Processor Family
- Intel Server Board based on 2nd Generation Intel Xeon Scalable Processor Family
- Intel Server Board based on Intel Xeon Platinum 9200 Processor Family
- Intel Server Board based on Intel Xeon processor E5-2600 v3/v4 product family (S2600WT, S2600TP, S2600KP, S2600CW)
- Intel Server Board based on Intel Xeon processor E3-1200 v2/v3/v4/v5/v6 product family

Supported Operating Systems

- UEFI Shell
- WinPE 4.0 (x64)
- Windows Server 2019
- Windows Server 2016
- Windows Server 2012 R2
- Windows 10
- RHEL 6.8 (x64)
- RHEL 7.3
- RHEL 7.5
- RHEL 7.6
- RHEL 8.0
- SLES 11.4 (x64)
- SLES 12.2
- SLES 15&Sp1
- CentOS 7.3 (x64)
- Debian 8.10

Known Issues:

1. In UEFI GUI switching between the Menu and other windows (main window and SEL info window), the file menu is always seen highlighted.
2. In UEFI if the SEL description in the information pane exceeds 250 characters then the heading for Generator ID will be missing in the UI.
3. Utilities, SNMP-SA and IASC cannot run at the same time due to KCS port conflict. There will be error message
"Error: Application Cannot Communicate to the BMC.".
4. IO port access is not allowed in Linux when UEFI secure boot is enabled. Please disable UEFI secure boot in F2 menu before running utility.
5. and keys are not supported to scroll around the UEFI GUI display pane.
6. Running Selviewer UEFI GUI from root directory of any drive is not supported.
7. Debian and SLES 15 OS do not allow IO memory map by default. User needs to add "iomem=relaxed" to grub boot option to enable IO memory map. Otherwise some features may not work.

This package contains the files needed for installing the Intel Serial IO driver. If it has been installed, updating (overwrite-installing) may fix problems, add new functions, or expand existing ones. Even though other OSes might be compatible as well, we do not recommend applying this release on platforms other than the ones specified.

Driver Installation via Installer:

- Copy and unzip the Intel Serial IO Driver onto the Platform under test.
- Locate the “SetupSerialIO.exe” file.
- Right click on the executable and select ‘Run as administrator’ option from the menu to start the installer and then click on ‘Yes’ button in User Account Control pop-up window.
- You should see welcome screen with component details. Click ‘Next >’ button to continue the installation.
- Next, you should see license agreement screen. Please review the license agreement and if you accept the license terms then check the check-box on “I accept the terms in the license Agreement” and click on the “Next >” button to continue the installation.
- Next, you can select the folder location where the driver will be installed. By default, the driver will be installed in c:program FilesIntelIntel Serial IO. Click on “Next >” button to continue installation.
- Next, a list of driver components that will be installed by the installer is displayed. Click on ‘Next >’ button to continue.
- After successful installation, you should see setup completion screen. Click on ‘Finish’ button to complete the installation.

Silent Driver Installation via Installer

- Copy and unzip the Intel Serial IO Driver onto the Platform under test.
- Open a Command Prompt (cmd.exe) with administrator rights (ie. Run as administrator). Click on ‘Yes’ button in User Account Control pop-up window.
- Change the directory to where you unzipped the driver in Step 1 and then change to the “Driver_Installer” directory.
- To see all available options for the Installer, run command “SetupSerialIO.exe -?”
- You should see a window pop-up. For the “-l ” option which specifies the language of the setup dialogs, the LCID list is shown in below table. Click OK to continue.
- Run command “SetupSerialIO.exe –b –s” to start the silent installation. (Where as x represents the particular version number.) This process should take about 1 min to complete. When silent installation is complete, the system will automatically reboot.
- After the system has booted, you can refer to section 0 to check the driver version.

Manual Installation via INF File:

- Copy and unzip the Intel Serial IO Driver onto the Platform under test.
- Locate the INF files. (iaLPSS_GPIO.inf, iaLPSS_I2C.inf, iaLPSS_SPI.inf, iaLPSS_UART2.inf)
- Right click on the INF file and select ‘Install’ option from the menu to start the installation and then click on ‘Yes’ button in pop-up window.
- After the installation of all the drivers, reboot the system.

About Serial IO Drivers:

If you install this package, your device will be properly recognized by compatible systems, and might even benefit from new features or various bug fixes.

Please note that, even though other operating systems might also be compatible, we do not recommend you apply any software on platforms other than the specified ones. Doing so might cause the installation to crash, which could even render the device unusable.

When it comes to installing the package, the steps should not be much of a hassle because each manufacturer tries to make them as easy as possible; usually, you must make check for compatibility, get the package, run the available setup, and follow the instructions displayed on-screen.

However, due to the large number of devices out there and the various ways for applying these packages, it would be best if you refer to the installation manual first, to be sure of a successful update.

That being said, click the download button, and apply the present software on your product. Also constantly check with our website to stay up to speed with latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.