- Generic update for FVL, CVL and CPK NIC OEM and FreeBSD 14.1
- New OS support: FreeBSD 14.1
- OpenEuler ARM architecture compatibility
- Introduced ICE driver migration for Linux DPLL interface usage in kernel 6.7
- Devlink support for tools algorithm improvement
- Ethtool flow-type ether support
- 40G ESXi new default VMDq loopback behavior and module parameter
- Message logs related to Health Status 0x110 updated
- Disable Optical Module Laser when Link/Port is disabled on E810
- GET_LLDP type command : get all ports LLDP information on E810.
- Disabling of port 0 (as long it’s not associated with PF 0).
- Use Rx Loss to detect cable disconnect from Module on E810
- Expanding i2c write handling to enable 4 bytes on E810
- UEFI UNDI AVF driver support.
- Removed 100G ESXi configuration of VMDq loopback via intcli
- General: Fixed probing VF driver on ARM systems.
- General: Empire Flats (E810CQDA2OCPV3G and L) MultiPort power class limits to 3.5W should only be present in CVL4.4, the fix increasing the limit back to 4.5W was taken in all CVL4.5 and later builds. The module’s power requirements exceed the device’s power supply.
- Firmware/NVM/NVM Update: RAMON specific workaround implemented in DreadnoughtLake scripts in case of caui4 no FEC links, was modified being applied only when outer phy is RAMON (and not Parkvale).
- Firmware/NVM/NVM Update: The NetworkDeviceFunction.MTUSize property is changed to reflect the current OS defaults before the user configures specific value.
- Firmware/NVM/NVM Update: Fixed a rare timing issue of nc-si oem command: plug-out optics and plug-in again, BMC can NOT get temperature by reason code 0x5089.
- Firmware/NVM/NVM Update: Removed the need for EMPR after temperature fatal threshold is exceeded.
- Firmware/NVM/NVM Update: When link goes down, recovered clock switches to an incorrect frequency, and the external DPLL shifts the system timing.
- Firmware/NVM/NVM Update: FW incorrectly mapped NC-SI channels to Physical ports when responding to the Intel OEM NC-SI command 0x26 (no other command affected).
- Firmware/NVM/NVM Update: Unsupported SMBus write command caused HW to trigger improperly handled FW behavior, which blocked subsequent SMBus writes other than MCTP.
- Firmware/NVM/NVM Update: If user configured 1G and needs to go back to 10G, not able to do so.
- Firmware/NVM/NVM Update: Fixed PTP Time Error to be under 5 ns when running PTP in Boundary Mode between PF with PKVL PHY and PF w/o PKVL PHY.
- Linux: Celo process may not be ended or killed while exiting application. As the result current console is non responsive. Stability of the system is not endangered and user can start next console session.
- Linux: Fixed adding VF to namespace and setting it to up status producing an error in dmesg, VF now works normally
- Firmware/NVM/NVM Update: PATCH request with request to change FlowControlConfiguration property returns success, but do not really apply changes.
- Firmware/NVM/NVM Update: LLDP receive property preserves the last received data, even when LLDP traffic doesn't contain the TLV item/data.
- Firmware/NVM/NVM Update: NetworkDeviceFunction schema Ethernet. The MACAddress property is not updated to the value in PATCH JSON. This is a regression. The issue is under investigation.
- Firmware/NVM/NVM Update: PATCH request with request to to change FlowControlConfiguration property returns success, but do not really apply changes. The issue is under investigation.
- Firmware/NVM/NVM Update: Fixed an issue where X710DA2 cannot get SFF temperature when another port is empty.
- ESX Driver: Multicast packets sent from VF are not visible on vmkernel interface connected to the first NIC port in ENS mode. The problem results in packet drop only on vmkernel interface (packets are not seen). This does not affect vf-vf traffic, and this is only an issue when sending multicast packets from VM to vmkernel.
- ESX Driver: When SR-IOV is enabled and VMDQ Loopback is disabled packets between VF-PF and VF-VMXNET3 can be dropped by the hardware when non-default RX queue is used for PF or VMXNet3, so VF-PF and VF-VMXNET3 traffic is disallowed for this configuration.
- Intel Ethernet Network Adapter E810-XXVDA4 for OCP 3.0
- Intel Ethernet Network Adapter E810-XXVDA2 for OCP 3.0
- Intel Ethernet Network Adapter E810-XXVDA2
- Intel Ethernet Network Adapter E810-XXVDA4
- Intel Ethernet Network Adapter E810-XXVDA4T
- Intel Ethernet Network Adapter I225-T1
- Intel Ethernet Server Adapter I210-T1
- Intel Ethernet Converged Network Adapter X540-T2
- Intel Ethernet Converged Network Adapter X540-T1
- Intel Ethernet Controller X540-AT2
- Intel Ethernet Converged Network Adapter X520-DA1
- Intel Ethernet Converged Network Adapter X550-T1
- Intel Ethernet Controller I350-AM2
- Intel Ethernet Controller I350-BT2
- Intel Ethernet Controller I350-AM4
- Intel Ethernet Controller X540-BT2
- Intel Ethernet Controller X550-AT2
- Intel Ethernet Controller X550-BT2
- Intel Ethernet Server Adapter I350-F2
- Intel Ethernet Server Adapter I350-T4V2
- Intel Ethernet Converged Network Adapter X550-T2
- Intel Ethernet Controller I210-CL
- Intel Ethernet Converged Network Adapter X520-SR2
- Intel Ethernet Converged Network Adapter X520-DA2
- Intel Ethernet Converged Network Adapter X520-LR1
- Intel Ethernet Converged Network Adapter X520-T2
- Intel Ethernet Controller I210-AS
- Intel Ethernet Controller I210-IS
- Intel Ethernet Controller I210-AT
- Intel Ethernet Server Adapter I350-T2V2
- Intel Ethernet Controller X550-AT
- Intel 82599EN 10 Gigabit Ethernet Controller
- Intel 82599ES 10 Gigabit Ethernet Controller
- Intel Ethernet Converged Network Adapter X520-QDA1
- Intel Ethernet Server Adapter I350-F4
- Intel Ethernet Controller I210-IT
- Intel 82599EB 10 Gigabit Ethernet Controller
- Intel Ethernet Controller I210-CS
- Intel Ethernet Converged Network Adapter X520-SR1
- Intel Ethernet Controller I211-AT
When connected, the operating system usually installs a generic driver that helps the computer to recognize the newly attached device.
However, proper software must be applied if you want to make use of all features that the network adapter has available. This task also allows computers to properly recognize all device characteristics such as manufacturer, chipset, technology, and others.
Updating the adapter's drivers and utilities version might improve overall performance and stability, increase transfer speeds, fix different compatibility problems and several network-related errors, as well as bring various other changes.
To install this release, simply get the package, extract it if necessary, run the setup, and follow the instructions displayed on-screen. When done, don't forget to perform a system restart and reconnect the network adapter to make sure that all changes take effect properly.
Without further ado, if you intend to apply this version, click the download button and install the package. Moreover, check with our website as often as possible so that you don't miss a single new release.
Top 4 Download periodically updates information of Intel PROSet/Network Adapter Driver 29.3 for Windows 10 full driver from the manufacturer, but some information may be slightly out-of-date.
Using warez version of Intel PROSet/Network Adapter Driver 29.3 for Windows 10 driver is hazardous. Our driver download links are directly from our mirrors or publisher's website, Intel PROSet/Network Adapter Driver 29.3 for Windows 10 torrent files or shared files from free file sharing and free upload services, including Rapidshare, HellShare, HotFile, FileServe, MegaUpload, YouSendIt, MailBigFile, DropSend, MediaMax, zUpload, MyOtherDrive, SendSpace, DepositFiles, Letitbit, LeapFile, DivShare or MediaFire, are not allowed!
It is not recommended to download drivers from illegal sites which distribute a keygens, key generators, pirate keys, serial numbers, warez full versions or cracks for Intel PROSet/Network Adapter Driver 29.3 for Windows 10. These drivers might corrupt your computer installation or breach your privacy. A driver might contain a trojan horse opening a backdoor on your computer. Hackers can use this backdoor to take control of your computer, copy data from your computer or to use your computer to distribute viruses and spam to other people.
Download Now
Update All Drivers