Intel NUC10i7FNHAA Performance Mini PC HDMI Firmware 1.77.04 for Windows 10 64-bit

To update the HDMI firmware:

- Download and unzip the downloadable archive file.
- Double click, BobcatAuxISPTool.exe to launch the tool.
- To confirm the firmware is an older version and needs to be updated, select Get FW Version.
- Note: If the HDMI device connected isn’t HDMI 2.0, the update will still work, but the version number won’t be shown.
- To continue with the update, on the Driver File line, select Browse, navigate to the bin folder and select: BobcatIsp_v1.02_cut2.2_aux_SA_signed.bin
- On the FW File line, select Browse, navigate to the bin folder and select: MCDP2800_C21_C22_V1.71.00_DAWSON_CMDB_171011_MP_V1.5
- Select Start, then select Yes at the prompt.
- The tool will proceed to update the HDMI firmware and will say, ISP completed! When finished.
- Note: The screen will go black for up to a minute. Do not turn off the Intel NUC or the monitor until the update is complete.
- To finish the update, the Intel NUC must be shut down, then it can be turned back on.
- Note :To confirm that the firmware is updated, follow steps 2 and 3 above.

About Firmware Updates:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device's functionality in the event of a software update either turning up faulty or causing the unit's overall performance to drop. However, bear in mind that applying an older firmware isn't recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it's best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device's firmware. Also make sure you constantly check with our website to ensure that you don't miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.