Intel iMR 3008 ROC Hardware RAID Firmware 24.21.0-0012

Firmware Package: 24.21.0-0012 (MR 6.14)

- Firmware 4.680.01.8248

- ROMENV 1.09

- BootBlock 3.07.00.00-0003

- NVDATA 3.1705.01-0002

- UEFI_Driver 0x06180200(signed)

- Hii 03.25.05.00(signed)

- FCODE 4.19.08.00

- BIOS 6.36.01.0

- Ctrl-R v5.19-0600

- PCLI 1.07.05

Bug Fixes and Enhancements:

- SCGCQ00857533 - (Resolved) - Kill adapter in line 1272 in file ../../raid/1078dma.c after pulling enclosure cable with IOs running on 240VD, JBOD

- SCGCQ01083581 - (Closed) - Activity LED is always ON even when no drives are present.

- SCGCQ01201958 - (Closed) - MR 6.13: Blocked Spin down Pass thru command for configured drives.

- SCGCQ01213915 - (Closed) - In RAID personality, MR_DCMD_CFG_AUTOCFG DCMD is disabled in non-240 VD environment.

- SCGCQ01215003 - (Closed) - Setting all the ldtoTgtId with 0xff beyond 240 entries.

- SCGCQ01223284 - (Closed) - MR_EVT_PD_ERROR_STATS events are logged when drive is moved to REBUILD/UNCONFIGURED BAD/ONLINE/OFFLINE. Also correct DCMD

- SCGCQ01227115 - (Closed) - FW crashes when FW update(OFU) is done with faulty onfi

- SCGCQ01230560 - (Closed) - Coverity issues:fixed the coverity defects.

- SCGCQ01230749 - (Closed) - MR6.12 NVRAM Overflow - incomplete FW logs

- SCGCQ01232275 - (Closed) - Update the MAXTransferLength properly for Driver enabled 1MB support feature

- SCGCQ01235505 - (Closed) - Assertion failure in ../../dm/mpt2/mptrec.c at line 3139, while performing cable pull/push operation.

- SCGCQ01236287 - (Closed) - corrected the span index

- SCGCQ01240031 - (Closed) - Cache Offload test fails with 16i controllers in OEM Server.

- SCGCQ01241568 - (Closed) - Coverity issue 15748 and 17765

- SCGCQ01241680 - (Closed) - Drive Strength values are incorrect for last 8 phys of 24i controller

- SCGCQ01242817 - (Closed) - Change Slew Rate on dual rank 24i Boards to fix ECC Errors.

- SCGCQ01252243 - (Closed) - Firmware halts upon changing controller personality to JBOD mode with MCTP enabled

- SCGCQ01253076 - (Closed) - Cache Data lost if power loss happens during descriptor preparation.

- SCGCQ01256120 - (Closed) - 'C0:mr_wakeup: mem 45569e20, cache line ffffffff' observed while running BGI on RAID 5 Volume with media errors.

- SCGCQ01258563 - (Closed) - Assertion failure in ../../raid/2108vI2o.c at line 2398 on flashing firmware

- SCGCQ01260609 - (Closed) - Dev defect to address action items identified during Ventura-3316 ONFI Review

- SCGCQ01261213 - (Closed) - Dev defect to handle HW action items identified during 3316-Ventura Onfi Review.

- SCGCQ01261426 - (Closed) - Cache data Lost when Term Log is set to "on"

- SCGCQ01262834 - (Closed) - 6.13 ONFI_PORT: If power loss occurs after OCR, FW might lose tty log.

- SCGCQ01262883 - (Closed) - 6.13_ONFI_PORT: Program the erase and wait count values during ONFI Initialization.

- SCGCQ01262884 - (Closed) - 6.13 ONFI PORT :Set bit 0 in global Interrupt Register so that host will receive an interrupt.

- SCGCQ01267220 - (Closed) - Flash File System Reads fail after system reset.

- SCGCQ01267700 - (Closed) - FW does not remember user induced bad blocks across boots.

- SCGCQ01268066 - (Closed) - Performance: Drops up to 30% seen across many profiles for Sequential writes for 24 SAS HDD R0

- SCGCQ01273216 - (Closed) - MR_6.13:FW flash pack -30 with reboot , result to 3316 Controller hang at bios level (Power PC)

- SCGCQ01274494 - (Closed) - Cache Restore fails if supercap is removed while cache offload is in Progress.

- SCGCQ01278512 - (Closed) - Unable to set termlog on/off from storcli intermittently on 3316 16i board.

- SCGCQ01282181 - (Closed) - Storcli Failed to create single PD R0 from UGood drive which has replaced a UBAD foreign drive

- SCGCQ01282319 - (Closed) - 3316 : After Termlog Toggling with power cycle, result to ERROR: Dirty disk cache data has been lost

- SCGCQ01283719 - (Closed) - Modify Read Eye Training Algorithm to make it spec compliant.

- SCGCQ01285595 - (Closed) - Coverity reported an uninitialized variable

- SCGCQ01288297 - (Closed) - Reboot the system with 240 R0 Volumes and changing the mode->JBOD is hitting Montask.

- SCGCQ01288781 - (Closed) - PL Fault 0000601e observed while running multipath on/off script in JBOD mode.

- SCGCQ01289147 - (Closed) - erase types and startSecureEraseNonSED is set accordingly

- SCGCQ01290201 - (Closed) - Modify NVDATA boot message to rename 'NVDATA image' to 'firmware image'

- SCGCQ01313607 - (Closed) - Cache data lost event seen for WT vds

- SCGCQ01313950 - (Closed) - Kill adapater observed while running IO's on 240 Volumes

- SCGCQ01316152 - (Closed) - Coverity: Fixing Coverity defect 16148

- SCGCQ01318465 - (Closed) - Fixing the coverity raised issue

- SCGCQ01319291 - (Closed) - Coverity issue 19341

- SCGCQ01323607 - (Closed) - HW workaround implementation for SCGCQ00830272 and SCGCQ01048567

- SCGCQ01323848 - (Closed) - auto config is not happening in some cases after issuing storcli /cx set autopdcache=r0

- SCGCQ01332706 - (Closed) - MR 6.14 Beta: MonTask: line 245 in file ../../raid/1078int.c while running reboot test with background operations

- SCGCQ01332947 - (Closed) - MR_6.14: 3316 PCI Trapping ISR incorrect logic for config trap address

- SCGCQ01334292 - (Closed) - Fix the 3316 Boot Block compilation and warning issue.

- SCGCQ01342601 - (Closed) - Imr 3108 FW crashes while upgrading from Pkg 24.18.0-0021 to Pkg 24.21.0-0007.

- SCGCQ01351483 - (Resolved) - MR_3108_WORKAROUND_PCIE_IGNORE_REPLY_PARITY_ERROR macro definition missing

- SCGCQ01204592 - (Closed) - Fatal Firmware error when connecting to straight without Group ID support.

- SCGCQ01221549 - (Closed) - FW does not fail unsupported erase type for a PD

- SCGCQ01222318 - (Closed) - Allow Cyrpto erase on non-System PD's and non RAID PDs(ISE capable drives) and monitor the erase progress.

- SCGCQ01227079 - (Closed) - Fix coverity reported issue

- SCGCQ01230441 - (Closed) - FW is not updating EPDs list exposed to host after drives removal event is posted which is causing dev nodes are not getting deleted on drive removal

- SCGCQ01235661 - (Closed) - Diagnostics report of iMR 3108 contains information about R6 and R60 is set to 0

- SCGCQ01237252 - (Closed) - Enable MR_DCMD_PD_ERROR_STATS and the event MR_EVT_PD_ERROR_STATS only for direct attached drives

- SCGCQ01252111 - (Closed) - DATA TLB ERROR, While connecting controller each Port to Back-Plane sequentially.

- SCGCQ01256005 - (Closed) - MR 6.13.1Alpha:Probable Drive/cable issue Event not printed in firmwarelogs on triggering drive/cable error when connected BP

- SCGCQ01263110 - (Closed) - Handling of DCR errors in MSS core

- SCGCQ01278480 - (Closed) - Controller does not boot up while performing cache offload .

- SCGCQ01280181 - (Closed) - Controller cache discarded due to memory/battery problem

- SCGCQ01283507 - (Closed) - Perf-Win:Performance drop of -24% is seen in OLTP for IO size-128K, QD[1]-R6 16DC, 6G-SATA HDD

- SCGCQ01297565 - (Closed) - Code review: turn off the onfi when bbu is bad

- SCGCQ01299214 - (Closed) - Coverity issues 19244, 19245, 19246 and 19248

- SCGCQ01299482 - (Closed) - MR 6.14 3316(Vail): 3316 Controller hangs in primary core on reboot in OEM server.

- SCGCQ01300678 - (Closed) - Fix coverity issue 19253 Structurally dead code in checkCacheOffloadStatus, raid/1078init.c

- SCGCQ01300689 - (Closed) - coverity defects fixed

- SCGCQ01317039 - (Closed) - To fix coverity issue 17759

- SCGCQ01299424 - (Closed) - FC: 0 CS: 0 offload meta signature not valid, ffffffff observed in FW logs on a system restart.

- SCGCQ01285311 - (Opened) - High DB and Log write-latency issues with 3316 for R0 in MS-Jetstress benchmarking

- SCGCQ01300667 - (Closed) - MR 6.14 - Fix coverity issue 19238

- SCGCQ01301658 - (Closed) - Coverity issue 15356

- SCGCQ01209605 - (Closed) - update the boundary values in UpdateFeatureSetValues()

- SCGCQ01250342 - (Closed) - FW hang finaly leading to kill adatper with inBox driver

- SCGCQ01114969 - (Closed) - MR 7.2: Add API support to make application work with Cachecade3.0 on Ventura (Public)

- SCGCQ01341925 - (Implemented) - Integrate 3316 PL 14.00.04.00 with MR 6.14

- SCGCQ01330898 - (Implemented) - PL integration

- SCGCQ01307233 - (Implemented) - Integrate PL phase 14.00.02.00 with MR 6.14

- SCGCQ01262698 - (Closed) - Shift IOPATH code by 4 cache lines to workaround 3316 performance issue.

- SCGCQ01260431 - (Implemented) - PR State Machine Clean up during Patrol Read/Check Consistency Conflicts

- SCGCQ01258853 - (Implemented) - Firmware:- Request to change (9361-8i) to permanently disable SDS Mode and JBOD Mode for OEM

- SCGCQ01255385 - (Closed) - Enable JBOD support in MR6.x for OEMID=9 ONLY for the OEM PCI IDs.

- SCGCQ01253696 - (Implemented) - Revert the DDR tuning changes for specific PCI IDs.

- SCGCQ01238286 - (Closed) - Integrate 3316 PL 13.00.04.00 (SCGCQ01237533)

- SCGCQ01238126 - (Closed) - Integrate PL 13.00.04.00 to MR_FW_SAS3_6.13_4G_DDR

- SCGCQ01231972 - (Closed) - MR 6.12: Adding 3316 PL library Version 12.0.5.0

- SCGCQ01228949 - (Closed) - Open up MR_DCMD_CFG_AUTOCFG for iMR for GET operation

- SCGCQ01224232 - (Closed) - Revert the DDR tuning changes for specific PCI IDs.

- SCGCQ01223351 - (Closed) - Integrating PL - SCGCQ01169053 into 6.1_Patch new It stream.

- SCGCQ01222700 - (Closed) - API changes for CR55 - PCIe lane/link speed

- SCGCQ01222698 - (Closed) - API change for Simplified RAID10 Creation

- SCGCQ01218406 - (Closed) - API Changes Required for Specific OEM Backplane functionality

- SCGCQ01215397 - (Closed) - Customer requesting digitally signed FW packages on their 3316 controller

- SCGCQ01215334 - (Closed) - API changes for PR SCGCQ01139678 - Method for determining bad ONFI flash in storcli

- SCGCQ01203751 - (Closed) - API changes for PR SCGCQ01127742 - Isolating faulty cable issue from bad drive issue

- SCGCQ01194361 - (Closed) - Integrating PL (SCGCQ01189907) 10.00.11.00 3108 6.10

- SCGCQ01188725 - (Closed) - Define CurrentFwNvmePageSize element in new MFI_REG_STATE_EXT3 register

- SCGCQ01213092 - (Closed) - MR7.1. Add MR API bit to indicate the profile is NVMe Only profile

- SCGCQ01304141 - (Closed) - Integrate 13.00.06.00 PL to MR 6.13

- SCGCQ01273435 - (Closed) - PL Checkin for phase 13.00.05.00 - PL RO SCGCQ01273246

- SCGCQ01265401 - (Closed) - Integrate 3316 PL 13.00.05.00 (RO SCGCQ01263844)

- SCGCQ01254954 - (Closed) - Add additional sense data to firmware tracker list

- SCGCQ01219862 - (Closed) - Method for determining bad ONFI flash via Storcli & SNMP trap upon NAND flash failure for (3108 and Intrude

- SCGCQ01188995 - (Implemented) - Make GPIO drive strengths configurable via NVDATA.

- SCGCQ01137359 - (Implemented) - IN FAILED ARRAY bit is not being set when a VD is cleared

- SCGCQ01215270 - (Closed) - Isolating faulty cable issue from bad drive issue

- SCGCQ01268896 - (Implemented) - PL integration

- SCGCQ00893669 - (Port_Complete) - Medium error correction events were not reported

- SCGCQ00895474 - (Port_Complete) - 3108 6.9: FW breaks MonTask: line 245 in file ../../raid/1078int.c with IOs on max VD configured and BGOps

- SCGCQ00895481 - (Port_Complete) - 3108 6.9: FW breaks MonTask: line 245 in file ../../raid/1078int.c with IOs on max VD configured and BGOps

- SCGCQ00895482 - (Port_Complete) - 3108 6.9: FW breaks MonTask: line 245 in file ../../raid/1078int.c with IOs on max VD configured and BGOps

- SCGCQ00946612 - (Port_Complete) - Sanity check for handling the cases where event length comes up as zero/ rPtr goes beyond iptr

- SCGCQ01093890 - (Port_Complete) - Storecli not showing vd after personality switch from sds to raid

- SCGCQ01149764 - (Port_Complete) - iMR: Drives with configuration is getting converted to JBOD if system already has maximum configurable drives.

- SCGCQ01180873 - (Port_Complete) - Function in FW (injectParityErr) doesn't work to generate i-cache parity error

- SCGCQ01186523 - (Port_Complete) - iEEESGL flag was not getting set for IO request in SES DCDB handler

- SCGCQ01191484 - (Port_Complete) - MR 6.12 Solaris 11.3 X86: "MonTask: line 2357 in file ../../raid/2108vI2o.c" while running IO's on 64 VD's with OCR.

- SCGCQ01198744 - (Port_Complete) - Unexpected all device insert event causes logical state change and VD deletion

- SCGCQ01219839 - (Port_Complete) - L2/L3 Cache error was detected on the RAID controller during boot (24 hours after shutdown hang)

- SCGCQ01219897 - (Port_Complete) - IMR_6.13: Drive is not marked as Foreign upon OCR when controller already has max configured PD's

- SCGCQ01219985 - (Port_Complete) - MR6.10_FW : CRC mismatch and invalid log event found while querying for Controller properties and learn cycle in parallel.

- SCGCQ01220128 - (Port_Complete) - Rebuild Error on PD (Error f0) with iMR 9341-8i (SAS3008)

- SCGCQ01220159 - (Port_Complete) - FW pkg 23.22.0-0017 and later initialize drives ~50% slower

- SCGCQ01229234 - (Port_Complete) - 3316_2G DDR Write Timeouts with Medusa DM discovery issue

- SCGCQ01229929 - (Port_Complete) - MR7.1_NVMe: After foreign import of 64 R0 VDs, operating system unable to discover the VDs

- SCGCQ01232058 - (Port_Complete) - FW does not fail unsupported erase type for a PD

- SCGCQ01232073 - (Port_Not_Required) - In RAID personality, MR_DCMD_CFG_AUTOCFG DCMD is disabled in non-240 VD environment.

- SCGCQ01232103 - (Port_Complete) - Open up MR_DCMD_CFG_AUTOCFG for iMR for GET operation

- SCGCQ01235056 - (Port_Complete) - FW crashes when FW update(OFU) is done with faluty onfi

- SCGCQ01235529 - (Port_Complete) - Update the MAXTransferLength properly for Driver enabled 1MB support feature

- SCGCQ01237142 - (Port_Complete) - In RAID personality, MR_DCMD_CFG_AUTOCFG DCMD is disabled in non-240 VD environment.

- SCGCQ01238262 - (Port_Complete) - iEEESGL flag was not getting set for IO request in SES DCDB handler

- SCGCQ01238639 - (Port_Complete) - Storecli not showing vd after personality switch from sds to raid

- SCGCQ01241870 - (Port_Complete) - Storcli failed to stop drives LED locating with a range

- SCGCQ01242590 - (Port_Complete) - iEEESGL flag was not getting set for IO request in SES DCDB handler

- SCGCQ01242592 - (Port_Complete) - iEEESGL flag was not getting set for IO request in SES DCDB handler

- SCGCQ01242596 - (Port_Complete) - iEEESGL flag was not getting set for IO request in SES DCDB handler

- SCGCQ01242597 - (Port_Complete) - iEEESGL flag was not getting set for IO request in SES DCDB handler

- SCGCQ01242649 - (Port_Complete) - MR6.12 NVRAM Overflow - incomplete FW logs

- SCGCQ01242650 - (Port_Complete) - MR6.12 NVRAM Overflow - incomplete FW logs

- SCGCQ01242651 - (Port_Complete) - MR6.12 NVRAM Overflow - incomplete FW logs

- SCGCQ01242766 - (Port_Complete) - MR7.1_NVMe: After foreign import of 64 R0 VDs, operating system unable to discover the VDs

- SCGCQ01243833 - (Port_Complete) - Local storage admin config FSM failure on setting TR on 64 VDs

- SCGCQ01243834 - (Port_Complete) - Local storage admin config FSM failure on setting TR on 64 VDs

- SCGCQ01245596 - (Port_Complete) - unable to encrypt disk when using no pass-phrase on WebBIOS

- SCGCQ01245782 - (Port_Complete) - Offline Marked DG (RAID0) appearing in RHEL 7 install

- SCGCQ01247063 - (Port_Complete) - Cache Offload test fails with 16i controllers in OWM Servers.

- SCGCQ01247264 - (Port_Complete) - SAS2208 card reset in DataCenter due to unknown reason

- SCGCQ01255838 - (Port_Complete) - RDM in Use-RDm Error & crashed into Montask during boot (SCGCQ01147739 DU issue)

- SCGCQ01256109 - (Port_Complete) - MR7.0 - DC when a PD is made offline during RLM of single Dr. R0 to 4 Dr. R1 (PRL11)

- SCGCQ01256178 - (Port_Complete) - Make GPIO drive strengths configurable via NVDATA.

- SCGCQ01259337 - (Port_Complete) - ONFI: To properly handle the OCR case with RESET Status Register.

- SCGCQ01260470 - (Port_Complete) - COL disarmed, VDs remain in WB mode, no Administrative Messages to bad flash part.

- SCGCQ01260995 - (Port_Complete) - Infinite loop in onfiSyncModeEnter

- SCGCQ01261425 - (Port_Complete) - FW crashes when setting fwtermlog bbu=on to a card with bad NAND flash

- SCGCQ01262837 - (Port_Complete) - FD33xD issues in VMWare

- SCGCQ01263212 - (Port_Complete) - Insertion of the boot messages and the evets for montoring the ONFI backup capacity.

- SCGCQ01263800 - (Port_Complete) - 'C0:mr_wakeup: mem 45569e20, cache line ffffffff' observed while running BGI on RAID 5 Volume with media errors.

- SCGCQ01263811 - (Port_Complete) - FD33xD issues in VMWare

- SCGCQ01263859 - (Port_Complete) - Handling of DCR errors in MSS core

- SCGCQ01264476 - (Port_Complete) - Invalid date for next learn cycle is set due to invalid date from OEM server (STF: Next learn time is 1970-01-28)

- SCGCQ01265413 - (Port_Complete) - OEM 32MB Image doesn't boot on PP boards

- SCGCQ01266168 - (Port_Complete) - 'C0:mr_wakeup: mem 45569e20, cache line ffffffff' observed while running BGI on RAID 5 Volume with media errors.

- SCGCQ01266169 - (Port_Complete) - 'C0:mr_wakeup: mem 45569e20, cache line ffffffff' observed while running BGI on RAID 5 Volume with media errors.

- SCGCQ01266300 - (Port_Complete) - FD33xD issues in VMWare

- SCGCQ01267801 - (Port_Complete) - In RAID personality, MR_DCMD_CFG_AUTOCFG DCMD is disabled in non-240 VD environment.

- SCGCQ01267851 - (Port_Complete) - Cache data Lost when Term Log is set to "on"

- SCGCQ01268059 - (Port_Complete) - Handling of DCR errors in MSS core

- SCGCQ01269779 - (Port_Complete) - Auto refresh is not happening when LD is deleted during rebuild is in progress

- SCGCQ01274496 - (Port_Complete) - In RAID personality, MR_DCMD_CFG_AUTOCFG DCMD is disabled in non-240 VD environment.

- SCGCQ01287082 - (Port_Complete) - unable to encrypt disk when using no pass-phrase on WebBIOS

- SCGCQ01288848 - (Port_Complete) - Controller cache discarded due to memory/battery problem

- SCGCQ01291492 - (Port_Complete) - Controller cache discarded due to memory/battery problem

- SCGCQ01294884 - (Port_Complete) - Cannot stop patrol read on PD with medium errors by the stop cmd

- SCGCQ01297497 - (Port_Complete) - Perf-Win:Performance drop of -24% is seen in OLTP for IO size-128K, QD[1]-R6 16DC, 6G-SATA HDD

- SCGCQ01297666 - (Port_Complete) - Code review: turn off the onfi when bbu is bad

- SCGCQ01299260 - (Port_Complete) - Code review: turn off the onfi when bbu is bad

- SCGCQ01300759 - (Port_Complete) - Perf-Win:Performance drop of -24% is seen in OLTP for IO size-128K, QD[1]-R6 16DC, 6G-SATA HDD

- SCGCQ01326069 - (Port_Complete) - OS hung and iMR FW reset when do delete and create VD from previous powersave PD (Spindowned)

- SCGCQ01332726 - (Port_Complete) - driver crashed after FW update via UCSM (UCSM bundle 2.2(8fS2)A/B to 3.1(2.163)A/B)

- SCGCQ01351614 - (Port_Not_Required) - Controller fails to boot up when migrated from 6.13 to 6.14 FW for Specific OEM

- SCGCQ00945335 - (Port_Complete) - Sanity check for handling the cases where event length comes up as zero/ rPtr goes beyond iptr

- SCGCQ01219901 - (Port_Complete) - Controller became unresponsive after hitting OCM error

- SCGCQ01232131 - (Port_Complete) - 3108 6.13-Beta: MonTask: line 3386 in file ../../dm/src/devmgr.c while running JBOD IO on SAS SSD with cable pull push

- SCGCQ01241869 - (Port_Complete) - Invalid date for next learn cycle is set due to invalid date from OEM server (STF: Next learn time is 1970-01-28)

- SCGCQ01243832 - (Port_Complete) - Local storage admin config FSM failure on setting TR on 64 VDs

- SCGCQ01243836 - (Port_Complete) - Local storage admin config FSM failure on setting TR on 64 VDs

- SCGCQ01248969 - (Port_Complete) - MR6.12 NVRAM Overflow - incomplete FW logs

- SCGCQ01255374 - (Port_Complete) - Activity LED is always ON even when no drives are present.

- SCGCQ01261095 - (Port_Complete) - FD33xD issues in VMWare

- SCGCQ01263759 - (Port_Complete) - FD33xD issues in VMWare

- SCGCQ01265514 - (Port_Complete) - MR_EVT_ARGS_PD_INQ structure giving wrong PD side as part of the event

- SCGCQ01273187 - (Port_Complete) - Configuration lost and system crashed on having a stale configuration connected

- SCGCQ01273960 - (Port_Complete) - MR_6.13:FW flash pack -30 with reboot , result to 3316 Controller hang at bios level (Power PC)

- SCGCQ01289123 - (Port_Complete) - RAID10 VD goes to failed state after performing RLM

- SCGCQ01223113 - (Port_Complete) - Request not to reset the Idle Timers.

- SCGCQ01235753 - (Port_Complete) - All 10T SAS HDDs can't be detected after setting spinupdrivecount=4

- SCGCQ01311439 - (Port_Complete) - SAS2208 card reset in DataCenter due to unknown reason

- SCGCQ01247082 - (Port_Complete) - Drive Strength values are incorrect for last 8 phys of 24i Controller

- SCGCQ01282285 - (Port_Complete) - Firmware hits montask while reconstruction when drive is pulled out

- SCGCQ01299219 - (Port_Complete) - Code review: turn off the onfi when bbu is bad

- SCGCQ01265445 - (Port_Complete) - GetAllLDAllowedOperation call in Storelib is not returning Allowed operations when some LDs are deleted

- SCGCQ01288845 - (Port_Complete) - Controller does not boot up while performing cache offload .

- SCGCQ01317176 - (Closed) - CTRLH: Sorting the Pds and Hot Spare drives in VD management

- SCGCQ01210262 - (Closed) - MR6.13_Storcli: Storcli throws wrong error message and also shows Dual error messages in detailed status

- SCGCQ01300711 - (Closed) - Code changes for Big Endian servers for OS detection on the VD

- SCGCQ01273421 - (Closed) - Port to Enclosure mapping is not correct in CTRL-R.

- SCGCQ01283497 - (Closed) - Handle memory leaks in getSortedPdList

- SCGCQ01278705 - (Closed) - Change Write Policy when create CacheCade VD in CtrlR Utility cannot show customer chose policy

- SCGCQ01317174 - (Closed) - Sorting the Pds and Hot Spare drives in VD management

- SCGCQ01325051 - (Closed) - CTRL-H: Online and UG drives are not sorted in the PD management screen.

- SCGCQ01312072 - (Closed) - LibMods: Sort the connector names, when the names are not in Port 0 -3 format

- SCGCQ01264142 - (Closed) - New fault code for routine synchronous reset

- SCGCQ01114969 - (Closed) - MR 7.2: Add API support to make application work with Cachecade3.0 on Ventura (Public)

- SCGCQ01222700 - (Closed) - API changes for CR55 - PCIe lane/link speed

- SCGCQ01222698 - (Closed) - API change for Simplified RAID10 Creation

- SCGCQ01218406 - (Closed) - API Changes Required for Specific OEM Backplane functionality

- SCGCQ01215334 - (Closed) - API changes for PR SCGCQ01139678 - Method for determining bad ONFI flash in storcli

- SCGCQ01203751 - (Closed) - API changes for PR SCGCQ01127742 - Isolating faulty cable issue from bad drive issue

- SCGCQ01188725 - (Closed) - Define CurrentFwNvmePageSize element in new MFI_REG_STATE_EXT3 register

- SCGCQ01213092 - (Closed) - MR7.1. Add MR API bit to indicate the profile is NVMe Only profile

- SCGCQ01307257 - (Closed) - Disk sorting based on connector name, slot and position

- SCGCQ01282293 - (Closed) - LibMods changes - Add OpenSSL v1.0.2i to StorCLI

- SCGCQ01214425 - (Closed) - Windows Server 2016 Nanoserver GCA version validation for MR and IT -- MR 6.13/SAS3 Phase 13/14

- SCGCQ01307232 - (Closed) - CTRL-R: Sort the disk based on connector name, position and slot

- SCGCQ01242802 - (Port_Complete) - OEM chassis in Ctrl-R utility Foreign View tab shows RAID - 00 as RAID - 1

- SCGCQ01245523 - (Port_Complete) - Drive Group Id in Foreign view tab is wrongly displayed

- SCGCQ01232037 - (Port_Complete) - 3108 2GB MR card BIOS CTrl-H: disks list in VD Mgmt incorrect.

- SCGCQ01249538 - (Port_Complete) - Libmods: SCGCQ01214152 - Storcli fails with segmentation fault (core dumped) with foreign import

- SCGCQ01267606 - (Port_Complete) - (Libmods) Isolating faulty cable issue from bad drive issue for controllers (3108 and 3316)

- SCGCQ01283479 - (Port_Complete) - Prepare To Transport

- SCGCQ01176928 - (Port_Complete) - Updated the string from "Instant Secure Erase" to "Cryptographic Erase"

- SCGCQ01300789 - (Port_Complete) - Libmods: Second OCR request not triggered, fired when first OCR request about to finish, but O/P shows success(SCGCQ01290216)

- SCGCQ01290430 - (Port_Complete) - Displays reboot message, on launching CTRL-R with controller in safe mode and Secured foreign drive.

- SCGCQ01283458 - (Port_Complete) - Disable security gives wrong error message when SECURE PD and Transport ready VD is present

- SCGCQ01283457 - (Port_Complete) - Manage Ded. HS option should not be shown when Drive Group is Transport Ready State.

- SCGCQ01268885 - (Port_Complete) - Solaris Sparc 11.3:After enabling largeiosupport from storcli, largeiosupport not enabled in CTRL Property.

- SCGCQ01300707 - (Port_Complete) - storclif64 can not create prl11 across 2 enclosure using 32 pds

- SCGCQ01283446 - (Port_Complete) - Rearrange Transport Ready form

- SCGCQ01283450 - (Port_Complete) - "Undo Prepare for Removal" needs to be removed from TR PDs

- SCGCQ01294079 - (Port_Complete) - CacheCade VD association returns error in Config Utility (Ctrl-R)

- SCGCQ01283447 - (Port_Complete) - Add Hidden field and block the Hideen VD and Transport VD in Boot Device

- SCGCQ01283441 - (Port_Complete) - Prepare To Transport

- SCGCQ01283543 - (Port_Complete) - CSCuw42102: Ctrl-R showing blank enclosure detail

- SCGCQ01356244 - (Port_Complete) - Ctrl-H hang during foreign import along with app tab toggling.

- SCGCQ01279496 - (Port_Complete) - Ctrl-R showing blank enclosure detail

- SCGCQ01291519 - (Port_Complete) - ventura B0 controller cannot delete Foreign config drives.

- SCGCQ01379238 (Port Of Defect SCGCQ01292708)-FW displays the ID in BIOS during boot up more than 1000+, even total drives is only about 160PDs

- SCGCQ01379365 (Port Of Defect SCGCQ01379327)-System reset is initiated twice in BIOS

- SCGCQ01379284 (Port Of EnhancementRequest SCGCQ01293535) - Headline: Reset Type and customer messaging for system resets initiated by controller oprom

- SCGCQ00883008 - (Closed) - Profile Mgmt API Changes

- SCGCQ00886417 - (Closed) - MR_RAID_CTX_G35 has one too many bits

- SCGCQ00927738 - (Closed) - Reintroduce numSGEExt Field in Raid Context for 3108 to support 1MB IO

- SCGCQ00948535 - (Closed) - The code had events with repetitive ID and some structures clashing

- SCGCQ01001936 - (Closed) - CtrlInfo.adapterOperations3.supportProfileChange is missing in Ventura Dev API baseline dated 2015-12-23

- SCGCQ01014835 - (Closed) - CtrlInfo.adapterOperations3.supportProfileChange is missing in Ventura Dev API baseline dated 2015-12-23 has been added back again into adapteroperations 4

- SCGCQ01242633 - (Closed) - Driver health shows as Failed even after handling the boot message.

- SCGCQ01289887 - (Closed) - When user unloads UEFI Driver nullify pHiiHandShakeProtocol and ask platform to free HII (memory and image handle)

- SCGCQ01264142 - (Closed) - New fault code for routine synchronous reset

- SCGCQ01114969 - (Closed) - MR 7.2: Add API support to make application work with Cachecade3.0 on Ventura (Public)

- SCGCQ01222700 - (Closed) - API changes for CR55 - PCIe lane/link speed

- SCGCQ01222698 - (Closed) - API change for Simplified RAID10 Creation

- SCGCQ01218406 - (Closed) - API Changes Required for Specific OEM Backplane functionality

- SCGCQ01215334 - (Closed) - API changes for PR SCGCQ01139678 - Method for determining bad ONFI flash in storcli

- SCGCQ01203751 - (Closed) - API changes for PR SCGCQ01127742 - Isolating faulty cable issue from bad drive issue

- SCGCQ01146597 - (Closed) - MR 6.12 - Add JBOD mode personality to MR_CTRL_PERSONALITY

- SCGCQ01141251 - (Closed) - MR 7.0: Add supportPdMapTargetId flag in MR_CTRL_INFO and MFI_CAPABILITIES

- SCGCQ01139344 - (Closed) - MR 6.13: Add API support for TFM/SCAP _MR_BBU_VPD_INFO_FIXED parameters

- SCGCQ01137627 - (Closed) - MR 6.13: Add a new control command to fetch ROC temperature data over I2C

- SCGCQ00867953 - (Closed) - profile management API

- SCGCQ00875328 - (Closed) - Mega API modifications needed for RMW-FP and Cache bypass features in Ventura

- SCGCQ00883262 - (Closed) - Merging api_overrides mega_api files with the files in the Mega_API development stream

- SCGCQ00941620 - (Closed) - Ventura: de-feature AHCI

- SCGCQ01023741 - (Closed) - MR_CTRL_INFO expansion from 2K to 4K

- SCGCQ01059740 - (Closed) - mega api changes for ibuttonless PR

- SCGCQ01075821 - (Closed) - Profile Management Changes to support requestedProfileID and optimisedProfile

- SCGCQ01094549 - (Closed) - MEGA_API Changes to incorporate new IO subtype to support redirect cached IO

- SCGCQ01133839 - (Closed) - MR 7.0: Add MR_RAID_FLAGS_IO_SUB_TYPE_LDIO_BW_LIMIT = 7 to mfi.h file

- SCGCQ01188725 - (Closed) - Define CurrentFwNvmePageSize element in new MFI_REG_STATE_EXT3 register

- SCGCQ01213092 - (Closed) - MR7.1. Add MR API bit to indicate the profile is NVMe Only profile

- SCGCQ01245780 - (Port_Complete) - EFI driver test Red-screen-of-death

- SCGCQ01310866 - (Port_Complete) - Return EFI_UNSUPPORTED if UEFI Driver already manages one controller.

- SCGCQ01242633 - (Closed) - Driver health shows as Failed even after handling the boot message.

- SCGCQ01287605 - (Closed) - When user unloads UEFI Driver nullify pHiiHandShakeProtocol and ask platform to free HII (memory and image handle)

- SCGCQ01325212 - (Closed) - HEFU: Don't check the return value for the function to get connector index and sorted connnector index

- SCGCQ01342734 - (Closed) - Incorrect Drive Group numbering in "Create Virtual Drive" menu

- SCGCQ01282322 - (Closed) - UseSetMem instaed of UnicodeSprint (L"")

- SCGCQ01312071 - (Closed) - HEFU: Sort the connector names, when the names are not in Port 0 -3 format

- SCGCQ01264142 - (Closed) - New fault code for routine synchronous reset

- SCGCQ01114969 - (Closed) - MR 7.2: Add API support to make application work with Cachecade3.0 on Ventura (Public)

- SCGCQ01234371 - (Closed) - HEFU - Sort the disk based on connector name, slot and position

- SCGCQ01222700 - (Closed) - API changes for CR55 - PCIe lane/link speed

- SCGCQ01222698 - (Closed) - API change for Simplified RAID10 Creation

- SCGCQ01218406 - (Closed) - API Changes Required for Specific OEM Backplane functionality

- SCGCQ01215334 - (Closed) - API changes for PR SCGCQ01139678 - Method for determining bad ONFI flash in storcli

- SCGCQ01203751 - (Closed) - API changes for PR SCGCQ01127742 - Isolating faulty cable issue from bad drive issue

- SCGCQ01188725 - (Closed) - Define CurrentFwNvmePageSize element in new MFI_REG_STATE_EXT3 register

- SCGCQ01213092 - (Closed) - MR7.1. Add MR API bit to indicate the profile is NVMe Only profile

- SCGCQ01145318 - (Port_Complete) - Prepare To Transport

- SCGCQ01245780 - (Port_Complete) - EFI driver test Red-screen-of-death

- SCGCQ01293975 - (Port_Complete) - Cannot perform RLM in HII in certain scenario

- SCGCQ01282444 - (Port_Complete) - Undo Prepare for Removal" needs to be removed from TR PDs

- SCGCQ01333898 - (Port_Complete) - A wrong message displayed in HII reconstruction browser while trying to trigger reconstruction again

- SCGCQ01293002 - (Port_Complete) - For security key, the length must be upto 32 not 256

- SCGCQ01293502 - (Port_Complete) - The 6G SSD Negotiated Link speed=12G in HII

- SCGCQ01333896 - (Port_Complete) - Need to correct the spelling mistake in the help message under the drive management page in HII

- SCGCQ01286463 - (Port_Complete) - MR 7.0.1 No fast/full init after creation of profile based VDs

- SCGCQ01293444 - (Port_Complete) - Show "Port 4-7 & Port 0-3" for all drives in the HII Drive Management when the controller uses x8 SAS link to expander

- SCGCQ01245896 - (Port_Complete) - MegaRAID option is listed in dashboard menu, with no options listed.

- SCGCQ01245792 - (Port_Complete) - 9460-16i - HDD information show messy code in BIOS when HDDs connected in LSI RAID card

- SCGCQ01274030 - (Port_Complete) - Fix sorting and SupportMorethan16Phys issue

- SCGCQ01293971 - (Port_Complete) - Unable to reconfigure RAID 0 VD to RAID 1 in HII when sufficient unconfigured good drive exists in the system.

- SCGCQ01282448 - (Port_Complete) - Disable security gives wrong error message when SECURE PD and Transport ready VD is presnet

- SCGCQ01293974 - (Port_Complete) - PCI/VPD data to be populated for MR cards-short term solution to hard code the values in Hii for Purley Launch

- SCGCQ01293999 - (Port_Complete) - HPE: Firmware Flash is not closed properly after the flash.

- Miscellaneous changes for different OEMs.

- SCGCQ01292338 - (Closed) - Generating Advanced Software Options for 9361-8i 2G does not work due to incorrect CtrlId in nvdata

- SCGCQ01092427 - (Closed) - Change spin up parameters for OEM card

- SCGCQ01142569 - (Implemented) - Disable break mirror/join mirror support for OEM MR controllers

- SCGCQ01142570 - (Implemented) - Disable break mirror/join mirror support for OEM iMR controllers

- SCGCQ01143551 - (Closed) - Check in and review latest OEM NVData (NMG support)

- SCGCQ01175496 - (Implemented) - Adding OOB parameter to 6.11 Nvdata stream

- SCGCQ01204357 - (Closed) - Enable Predictive Failure LED for Direct-attached configs for all MR 3108 OEM controllers

- SCGCQ01204569 - (Closed) - Enable Predictive Failure LED for Direct-attached configs for all iMR 3108 OEM controllers

- SCGCQ01229469 - (Closed) - The device Missing Delay needs to be updated to 8 seconds in 3108 OEM controllers.

- SCGCQ01236244 - (Closed) - Modified NVDATA for iMR 3008 card to enable HII as default

- SCGCQ01261964 - (Closed) - NVDATA Change to make slot mapping work for OEM card

- SCGCQ01269047 - (Closed) - Disable JBOD personality(mode) for OEM

- SCGCQ01270037 - (Closed) - Added new PnP ID for their 3108 ROMB design

- SCGCQ01306487 - (Closed) - NVDATA: Request to change OEM cards to permanently disable SDS Mode and JBOD Mode

- SCGCQ01034104 - (Closed) - NVDATA PNP ID addition request from customer

- SCGCQ01163999 - (Implemented) - OEM requests update to MR 6.12 NVDATA for their MR and iMR controllers

- SCGCQ01197422 - (Closed) - Add PNP ID support in NVDATA for OEM

- SCGCQ01255538 - (Closed) - Request to change OEM (9361-8i) NVDATA to permanently disable SDS Mode and JBOD Mode

- SCGCQ01258773 - (Closed) - OEM 8i (9361-8i) SGPIO Clock Needs to be set to 100 KHz

- SCGCQ01260807 - (Closed) - Enabled MCTP over PCIe for OEM

- SCGCQ01175981 - (Implemented) - MegaRAID 3108 ROMB with 2GB DDR3 for cachevault single write mode (NVDATA Change)

- SCGCQ01270101 - (Closed) - Set OEM specific SGPIO Clock frequency below 100 KHz

UEFI (EFI 2.0) instructions for updating RAID Firmware:

1. Download and extract all files to a local drive.

2. Boot the target system to EFI shell.

3. Change directory to the local drive and directory containing the flash update files and the firmware image file.

4. Type "update.nsh" or "eficmdtool2 -adpfwflash -f MR514p3.rom -noverchk -aall"

5. Wait for the flash to complete. Do NOT reboot the system during the update.

Windows and Linux instructions for updating RAID Firmware:

- The firmware update may be run from Within Windows or Linux using the appropriate versions of CmdTool2.

-In Windows, unzip the utility into the same directory as the rom file by typing "cmdtool2 -adpfwflash -f MR514p3.rom -aall".

-The Linux CmdTool2 by running the rpm and then calling the utility from /opt/MegaRAID/CmdTool2 as "./CmdTool2 -AdpFwFlash -f MR514p3.rom -aall"

DOS instructions for updating RAID Firmware:

1. Download and extract all files to a local drive.

2. Boot the target system to DOS.

3. Change directory to the local drive and directory containing the flash update files and the firmware image file.

4. Type "update.bat" or "doscmdtool2 -adpfwflash -f MR514p3.rom -aall"

5. Wait for the flash to complete. Do NOT reboot the system during the update.

This download is valid for the products listed below:

- Intel Compute Module HNS2600TP24R

- Intel Compute Module HNS2600TPFR

- Intel Server Board S2600TP

- Intel Compute Module HNS2600TPF

- Intel Server Board S2600CWTSR

- Intel Compute Module HNS2600KP24R

- Intel Server Board S2600TPFR

- Intel RAID Controller RS3WC080

- Intel Server Board S2600KPTR

- Intel Integrated RAID Module RMS3HC080

- Intel Server Board S2600TPF

- Intel Compute Module HNS2600TP

- Intel Compute Module HNS2600TP24S

- Intel Compute Module HNS2600TP24SR

- Intel Compute Module HNS2600TP24STR

- Intel Server Board S2600KPR

- Intel Server Board S2600CW2SR

- Intel Server Board S2600KPF

- Intel Compute Module HNS2600TPR

- Intel Server Board S2600KPT

- Intel Server Board S2600KP

- Intel Compute Module HNS2600KP

- Intel Server Board S2600KPFR

- Intel Compute Module HNS2600KPFR

- Intel Compute Module HNS2600KPF

- Intel Compute Module HNS2600KPR

- Intel Server Board S2600TPR

- Intel Compute Module HNS2600KP24

- Intel Compute Module HNS2600TP24

About SATA / AHCI / RAID Drivers:

When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to change from one mode to another after the OS has been applied, appropriate drivers are required.

Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.

To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.

So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don't forget to constantly check with our website so that you don't miss a single new release.