- General: MPLS (mpls-pay.pkg) and eCPRI (ecpri.pkg) DDP packages cannot be loaded.
- Linux Driver: More than 16 VLANs assigned to a Virtual Function (VF) in untrust mode are operational
- Linux Driver: Ethtool (via ethtool -m comand) and dmesg displays information that the SFP module is not inserted on the platform where there is no SFP cage.
- Linux Driver: FEC mode setting is not available for Intel Ethernet Controller X722 devices (via ethtool -- show-fec command).
- Linux Driver: VF is not operational when a number of queues has been changed without turning off the VF first.
- Linux Driver: List of MAC addresses assigned to VF is removed after an Intel AVF driver reload.
- Linux Driver: Reloading the Intel AVF driver clears VF mirrors ingress settings while both Physical Function (PF) and VF mirrors have been added.
- Linux Driver: Despite being added, PF egress or ingress mirrors still show as turned off.
- Linux Driver: Trunk settings have no effect on filtering traffic of host VLANs.
- Linux Driver: Allow broadcast (allow_bcast) option is not present in sysfs.
- Linux RDMA Driver: In RedHat 8.1, the i40iw driver does not compile.
- NVM Update Tool: The X722 adapter doesn't allow for updates through other physical ports when dummy deviceId 0x37CC is detected at the first physical port. It's not possible to swap between different OCP PHY modules.
- NVM Update Tool: On X710-T4L and X710-T4L for OCP 3.0 adapters, fast update executed by the NVM Update Tool with RESET TYPE: PHY entry in config file ends with PHY reset failed information and exit code 18.
- EFI Driver: Wake on LAN (WoL) settings can only be saved after a power cycle on X710 OCP3.0 adapters.
- Virtualization: SR-IOV is disconnected when 2.5G or 5G speed is set on X710TLG GbE RJ45 PCIe adapters.
- Intel Ethernet Controller X710-AM2
- Intel Ethernet Controller X710-AT2
- Intel Ethernet Controller X710-BM2
- Intel Ethernet Controller X710-TM4
- Intel Ethernet Controller XL710-AM1
- Intel Ethernet Controller XL710-AM2
- Intel Ethernet Controller XL710-BM1
- Intel Ethernet Controller XL710-BM2
- Intel Ethernet Controller XXV710-AM1
- Intel Ethernet Controller XXV710-AM2
- Intel Ethernet Converged Network Adapter X710-DA2
- Intel Ethernet Converged Network Adapter X710-DA4
- Intel Ethernet Converged Network Adapter X710-T4
- Intel Ethernet Converged Network Adapter XL710-QDA1
- Intel Ethernet Converged Network Adapter XL710-QDA2
- Intel Ethernet Network Adapter X710-DA2 for OCP 3.0
- Intel Ethernet Network Adapter X710-DA4 for OCP 3.0
- Intel Ethernet Network Adapter X710-T2L
- Intel Ethernet Network Adapter X710-T2L for OCP 3.0
- Intel Ethernet Network Adapter X722-DA2
- Intel Ethernet Network Adapter X722-DA4
- Intel Ethernet Network Adapter XXV710-DA1
- Intel Ethernet Network Adapter XXV710-DA1 for OCP
- Intel Ethernet Network Adapter XXV710-DA2
- Intel Ethernet Network Adapter XXV710-DA2 for OCP
- Intel Ethernet Server Adapter X710-DA2 for OCP
- Intel Ethernet Server Adapter XL710-QDA1 for Open Compute Project
- Intel Ethernet Server Adapter XL710-QDA2 for Open Compute Project
When connected, the operating system usually installs a generic driver that helps the computer to recognize the newly attached device.
However, proper software must be applied if you want to make use of all features that the network adapter has available. This task also allows computers to properly recognize all device characteristics such as manufacturer, chipset, technology, and others.
Updating the adapter's drivers and utilities version might improve overall performance and stability, increase transfer speeds, fix different compatibility problems and several network-related errors, as well as bring various other changes.
To install this release, simply get the package, extract it if necessary, run the setup, and follow the instructions displayed on-screen. When done, don't forget to perform a system restart and reconnect the network adapter to make sure that all changes take effect properly.
Without further ado, if you intend to apply this version, click the download button and install the package. Moreover, check with our website as often as possible so that you don't miss a single new release.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Top 4 Download periodically updates information of Intel 700 Series Ethernet Adapters NVM Utility 8.00 full driver from the manufacturer, but some information may be slightly out-of-date.
Using warez version of Intel 700 Series Ethernet Adapters NVM Utility 8.00 driver is hazardous. Our driver download links are directly from our mirrors or publisher's website, Intel 700 Series Ethernet Adapters NVM Utility 8.00 torrent files or shared files from free file sharing and free upload services, including Rapidshare, HellShare, HotFile, FileServe, MegaUpload, YouSendIt, MailBigFile, DropSend, MediaMax, zUpload, MyOtherDrive, SendSpace, DepositFiles, Letitbit, LeapFile, DivShare or MediaFire, are not allowed!
It is not recommended to download drivers from illegal sites which distribute a keygens, key generators, pirate keys, serial numbers, warez full versions or cracks for Intel 700 Series Ethernet Adapters NVM Utility 8.00. These drivers might corrupt your computer installation or breach your privacy. A driver might contain a trojan horse opening a backdoor on your computer. Hackers can use this backdoor to take control of your computer, copy data from your computer or to use your computer to distribute viruses and spam to other people.