Grandstream GXP2130 IP Phone Firmware 1.0.8.46

ENHANCEMENT:

- Added Option to Show/Hide VPK label on call screen [SHOW/HIDE VPK LABEL ON CALL SCREEN]

- Added Option to disable and enable the notification popup window for the missed call [MISSED CALL NOTIFICATION]

- Added Option to Sync Extension Board Backlight with LCD [SYNC EXT BOARD BACKLIGHT WITH LCD]

- Allowed Certificate upload for OpenVPN [CERTIFICATE UPLOAD FOR OPENVPN]

- Added Support of PAI update for CallPark VPK/MPK [PAI UPDATE FOR CALL PARK VPK/MPK]

- Added option to disable predictive dial feature [DISABLE PREDICTIVE DIAL]

- Added missed call indication popup window [MISSED CALL INDICATION]

- Added ability to hide the picture icon on call screen if not set [HIDE PROFILE PICTURE]

- Upgraded Dropbear to v2016.74.

- Updated “FR”, “ES”, “PT” web language.

- Removed G729 codec restriction.

- Updated NTP default value to "pool.ntp.org" [NTP DEFAULT VALUE CHANGE]

- Added backward support Affinity password and added support for passcode [Affinity PASSWORD SUPPORT]

- Added to show/hide VPK label in call screen with softkeys [HIDE/SHOW LABEL SUPPORT]

- Improved the layout for smaller LCD phones’ call screen [CALL SCREEN IMPROVEMENT]

- Improved attended transfer feature [ATTENDED TRANSFER IMPROVEMENT]

- Added customizable OPUS Payload Type

- Added DND Barge - Internal Calls and Paging [DND BARGE]

- Added user option to enable Plantronics EHS headset ringtone [EHS HEADSET RINGTONE]

- Hided Caller ID info on line key and BLF Presentation [HIDE BLF REMOTE STATUS]

- Enabled RTCP & RTCP-XR [ENABLE RTCP & RTCP-XR]

- Added GXP Color: Link command displays 100Mb/s for Gigabit ports [LINK COMMAND]

- Added support TLS negotiation over 1, 1.1, and 1.2 for SIP [TLS NEGOTIATION]

- Added VPK paging support inside call screen [VPK PAGING SUPPORT INSIDE CALL SCREEN]

- Added enhancement for outbound notification [ENHANCEMENT FOR OUTBOUND NOTIFICATION]

- Added support for Up/Down line switching when call screen is under active/overview state [LINE SWITCHING IN CALL SCREEN]

- Added support to send SIP log with the Keyword Filtering SIPStack [SIP LOG SUPPORT WITH KEYWORD FILTERING]

- Added the MAC address in SIP Header of Register [MAC HEADER SUPPORT IN SIP HEADER]

- Added ability to remove ‘target’ softkey [TARGET SOFTKEY REMOVAL]

- Added ability to remove SIP error on LCD [SIP ERROR MESSAGE DISPLAY REMOVAL]

- Added requirement sending instant message from the web [SENDING INSTANT MESSAGE FROM THE WEB]

- Added features that supports configurable option for RFC2543 HOLD (0.0.0.0) and RFC3261 (a line) [RFC2543 HOLD SUPPORT]

- Added the ability to manage Call History ability from Web GUI [CALL HISTORY MANAGEMENT]

- Enhanced intercom options (includes Intercom Mute, Intercom Tone, and Intercom Barge) [INTERCOM SETTINGS SUPPORT]

- Added customizable Softkey Layout [SOFTKEY LAYOUT CUSTOMIZATION]

- Added DND Authorized Number(Whitelist) & Blacklist and other enhancement [DND ENHANCEMENT]

- Added Affinity support [Affinity SUPPORT]

- Enhanced MORE softkey selection (list of the More softkey items instead of letting user keep tapping MORE to switch to different page) [MORE SOFTKEY DISPLAY MODE]

- Added the Web GUI default password warning message with password change shortcut [WEB GUI DEFAULT PASSWORD WARNING MESSAGE]

- Improved Bluetooth handsfree device connecting process [BLUETOOTH CONNECTING ENHANCEMENT]

- Enhanced Instant Message List page to display to match the rest of the menu pages

- Added contact picture/icon through SIP Call-Info header [CONTACT PICTURE SUPPORT]

- Added LINE key mode support, coexist with legacy mode[LINE KEY MODE SUPPORT]

- Added Live DialPad Feature [LIVE DIALPAD FEATURE SUPPORT]

- Added Automatic Redial Function [AUTOMATIC REDIAL SUPPORT]

- Added Preferred Default Account [PREFERRED DEFAULT ACCOUNT SUPPORT]

- Added GXP2200EXT LCD timeout [GXP2200EXT LCD TIMEOUT ]

- Split Firmware/Config Upgrade Method/Username/Password [SPLITTING FIRMWARE/CONFIG UPGRADE METHOD]

- Added ability to filter characters from dialed numbers [FILTER CHARACTERS FROM DIALED NUMBERS]

- Added ability to enable/disable local call forwarding rules without erasing configured numbers [DISABLING LOCAL CALL FORWARDING RULES ENHANCEMENT]

- Added specific model configuration file [SPECIFIC MODEL CONFIGURATION FILE]

BUG FIX:

- Fixed Device crash issue in call cancel performance test

- Fixed Local Call Feature does not work when the account has dial plan xxxxx+

- Fixed Device doesn't play ring tone after dismissing incoming call then ending current call

- Fixed Two call with different accounts could not transfer in the same platform

- Fixed DUT slowed down due to thread pool built up

- Fixed Softkeys web page title is displayed wrong

- Fixed ActionURL issues

- Fixed Illogical remote party's avatar behavior on call screen

- Fixed The picture still exists in call after deleted by the Delete button

- Fixed Headset LED displayed abnormally after enabling Live DialPad in headset toggle mode

- Fixed Web display language couldn't switch to Chinese

- Fixed Missed Call Notification can still be reset after factory reset

- Fixed Device could not get OpenVPN IP after downgrading firmware

- Fixed DUT doesn't update the CID when preforming auto-attended transfer

- Fixed Call history displayed wrong after transferring calls

- Fixed No sound in first 2 calls established using Speaker in Sound page

- Fixed History didn't show the CID info for the caller that was parked after picking up a parked call

- Fixed Monitored Call Park VPK/EXT LED displayed abnormally if connected with extension boards

- Fixed LCD displayed extra if pressed More softkey then checked OK in setting Forward feature

- Fixed LCD stayed in Cancel ForwardAll page 4s after pressing CancelFwd softkey

- Fixed The call screen displayed abnormally after disabling predictiveve dialing feature

- Fixed The EXT displayed abnormally when many accounts configured Eventlist BLF URI

- Fixed device played dial tip tone in Idle after CancelFwd

- Renamed "Resort" softkey in phonebook to "Sort"

- Fixed DTMF request doesn't work issue

- Fixed The extension board backlight was closed after switching Sync Backlight with LCD option

- Fixed phone cannot get IP issue if VLAN tag is set to zero and VLAN priority is set to non-zero value

- Fixed HTTP/HTTPS web port could still be reset in default status

- Fixed Pressing DTMF MPK/VPK can’t play keypad tone after enabling “Live DialPad”

- Fixed Audio mode worked abnormally in Toggle mode if set 'Enable Live DialPad'

- Fixed Device works abnormally if setting Automatic Redial and Off-hook Auto Dial at the same time

- Fixed Automatic redial doesn't work in transfer process

- Fixed Device doesn't send SUBSCRIBE for Broadsoft feature after receiving 489

- Fixed Device doesn’t play ring tone after pressing “Silence” softkey and then a new call comes in

- Fixed Dial plan rule doesn't take effect under account mode

- Fixed 802.1X port based authentication is not working

- Fixed LCD displayed abnormally after one conference participant ends the call

- Fixed Using "Use Configured IP" and "Accept Incoming SIP from Proxy only" feature exists conflict

- Fixed Phone crashes while trying to off-hook

- Fixed Device didn't play ring tone after cancel transfer

- Fixed Dialing numbers non-matching dial plan still could trigger Automatic Redial

- Fixed Audio wrongly switches to speaker when quickly toggling hook switch

- Fixed Device plays dial tip tone in idle if modifying web options after cancelling ForwardAll

- Fixed The ringtone is abnormal when enabling “Live Dialpad”

- Fixed “DeleteAll” softkey doesn't take effect on Broadsoft phonebook list interface

- Fixed The phone doesn't enter dialing state when “Newcall” softkey is pressed in idle state

- Fixed System time does not update with time zone change

- Fixed Custom Silence key will disable the sound of the established call

- Fixed dial plan will cause the phone crash when it’s too long

- Fixed crash when downloading cfg multiple times

- Fixed GUI crashed after pressing softkeys repeatedly in UCM conference room

- Fixed Phone fails to make call when about to re-register

- Fixed Account Mode to make device handle multiple concurrent calls with only one line configured as default line mode

- Fixed device stops at “Upgrading” screen after uploading correct firmware file with wrong name

- Fixed screensaver is On but it will close when VPK is active

- Fixed LCD couldn’t enter screensaver status after timeout

- Fixed presence watcher VPK lights off in hold status

- Fixed device doesn’t automatically fill related info when save Broadsoft call log to local phonebook

- Fixed the phone couldn't dial the contacts in the predictive dial list

- Fixed If the NTP server does not respond, the device does not try the next IP in the list

- Fixed phone is not honoring DHCP option 66

- Fixed the default firmware Upgrade via mode should be HTTPS not TFTP after clicking reset

- Fixed VLAN DHCP does not take effect in only Option 43 of the environment

- Fixed UCM Detect doesn't work

- Fixed Accounts and VPKs disappears after setting Keypad Menu mode

- Fixed LCD displayed and skipped abnormally after switching language

- Fixed web UI is not locked out after five login failures

- Fixed failed to login SSH

- Fixed device registration fails after enabling 'Validate Certificate Chain'

- Fixed the CA certificate cannot be deleted after uploaded on Trusted CA Cert

- Fixed phonebook sorting on web page didn't work

- Fixed Eventlist BLF list should disappear after disabling Auto Provision Eventlist BLFs

- Fixed GXP2130&2135 lack Screensaver Source option on LCD display web page

- Fixed There is no Save and Apply button on EXT web page

- Fixed VPK is displayed abnormally after switching page then pressing lines in dialing page

- Fixed some action URL did not work

- Fixed web prompts 'Phone is currently busy' if change is saved after cancelling redial

- Fixed G.723 Rate default value of Account5/Account6 is wrong after factory reset

- Fixed Account5/Account6 registered status doesn't display on Account Status web page

- Fixed Auto-Attended transfer still works even without enabling the feature

- Fixed support to stop Screensaver when VPK is active

- Fixed the volume is wrong after switching audio channel at the CALLING screen

- Fixed SCA Call-info call termination does not show active state on second DUT

- Fixed LCD doesn't skip after EXT speed Dial in Target page

- Fixed there is no Conference mode in LCD VPK/MPK settings page

- Fixed 0 changed to + if DTMF Delay set with larger value

- Fixed LCD displayed in English and switching language doesn't work after factory reset

- Fixed if VPK using call park, even if it subscribes failed, we should still support dial out

- Fixed Edit and Dial window disappears after pressing some keys

- Fixed Busy tone is abnormal after far-end and the call

- Fixed device does not play key/DTMF tone at Dialing/Call screen

- Fixed VPKs in HF line page doesn't work

- Fixed public mode login window is displayed abnormally

- Fixed Account1 registers abnormally after enabling Delay Registration

- Fixed LCD displays abnormally when there is incoming call to non-Account1 in ForwardAll page

- Fixed phone answers paging call even if custom call-info is configured

- Fixed Password Length and DTMF Delay are displayed abnormally if values are out of range

- Fixed users couldn't download devices' screenshot pictures

- Fix wrong LLDP VLAN ID is used by phone and phone's Ethernet VLAN interface is not removed when VLAN ID from network switch LLDP packet is greater than 255

- Changed "Local Call Log" to be "Local Call History"

- Fixed Monitored Call Park VPK is displayed abnormally after pickup then ending call

- Fixed Auto Provision Eventlist BLF must be filled with EXT field from XML file sent by Broadsoft server

- Fixed VPK cannot reset value and description fields via config file

- Fixed BLF MPK doesn’t turn off after Reset web page

- Fixed Chinese tooltip for Local SIP Port is wrong

- Fixed device works abnormally after using random port

- Fixed click-to-dial works abnormally in Click-To-Dial disabling status

- Fixed weather doesn’t work

- Fixed idle LCD brightness displays without icon

- Fixed LCD displays abnormally after pressing XML VPK in call

- Fixed LCD doesn’t display UCM conference CEI info

- Fixed LCD displays abnormally in pickup call page after parking call

- Fixed audio disappears and no sound if back to home then adjusting volume in call

- Fixed LCD displays abnormally after switching pages in Transfer/CONF

- Fixed callee Request Timer doesn't work

- Fixed Blind transfer recovery feature has some issues

- Fixed LCD prompts “System Error: CSS Error” in talking status

- Fixed device can’t get the weather information after disable/enable weather

- Fixed phone doesn’t register account and web page phonebook click-to-dial displays error

- Fixed device works abnormally after switching calls in Random RTP port mode

- Fixed Auto Provision Eventlist BLFs fails after re-registering the account

- Fixed NAPTR/SRV mode in DNS works abnormally

- Fixed after disabling weather and currency phone still performs DNS query for Yahoo

- Fixed Line keys and VPKs couldn’t be modified through config file

- Fixed LCD displays abnormally in pickup call page after parking call

- Fixed the very first LLDP packet (with TTL=0) is not sent out

- Fixed device does not send IP addr in LLDP chassis but MAC address

- Fixed Device uses wrong account to predictive dial in HF dialing page

- Fixed there is no Bluetooth phonebook on contacts

- Fixed call history group on web and LCD are not the same

- Fixed LCD doesn’t update in time when call history is cleared from web page

- Fixed missed call icon doesn’t disappear after the records are deleted from webUI

- Fixed contacts Search All feature interface jump error causes search failed

- Fixed the phone doesn’t use default port 80 when the HTTP proxy URL doesn’t include port value

- Fixed LCD does not prompt whether the input of HTTP(S) ID&PW is correct or wrong

- Fixed BLFs take long to recover after network outage

- Fixed LCD does not display error message when self-defined city code is invalid

- Fixed phone sends multiple DTMF tones when in-audio method

- Fixed LCD brightness displays wrong if there is incoming call in Appearance page

- Fixed the capture store in USB doesn’t take effect

- Fixed phone doesn’t reset Nonce count when authentication is required during registration

- Fixed not sending SSL certificate during wallpaper download

- Fixed Eventlist BLFs of non-related account disappears after unregistering account

- Fixed BLF MPK on the last line doesn’t display status after running on/off handsfree mode

- Fixed “Check new firmware only when F/W pre/suffix changes” feature doesn’t work

- Improved call screen switching performance

- Fixed BLF status not changing correctly

- Fixed predictive favorite contact not showing after offhook

- Fixed phone random crash when process config file update

IMPORTANT UPGRADING NOTE:

- For GXP2130/2140/2160, once upgraded to 1.0.7.15 or above, downgrading to 1.0.5.x firmware version or lower is not supported.

- For GXP2170/2135, once upgraded to 1.0.7.15 or above, downgrading to 1.0.6.9 firmware version or lower is not supported.

- This release adds Predictive Dialing feature which included a required internal change. If you downgrade from 1.0.8.46 to 1.0.7.25 you will lose the call history

About VoIP Phone Updates:

Firmware updates for VoIP Phones are very important as they usually contain many bug fixes, add new features and updates, as well as add additional security features.

One of the main problems users come across when attempting to upgrade their VoIP Phone is that their device may be locked to a certain Carrier. Adding an unlocked version of the firmware may cause the device to stop working on certain networks. This operation may void your carrier warranty and, as such, is not recommended.

Before downloading, make sure that you have selected the appropriate firmware for your device and that the update supports the VoIP service provider you use.

Generally, it is important to upgrade older firmware in sequence (v1 to v2 to v3) and so on, because many manufacturers don’t launch standalone update packages.

Although using beta release firmware packages is tempting, it can prove to be quite risky as well. If you choose to try beta release updates, please read the detailed firmware notes and make sure that you have the possibility to revert to an older and more stable version in case the beta turns out faulty.

If you feel that this update can improve the functionality of your VoIP Phone, please use the download button and follow the installation instructions.