Grandstream GDS3705 Video Door Systems Firmware 1.0.0.41

BUG FIX

- Fixed only the 1st doorbell number can answer the call normally in Door Bell Call Mode.
- Fixed cannot answer the call after uploading an empty custom doorbell ringtone.
- Fixed GDSManager cannot open door2 via the remote PIN.
- Fixed Digit Input will not open Door1 when disable ALMOUT1 open door feature.
- Fixed alarm not activated even wrong private PIN inputted many times.
- Fixed no error prompt when saving “Door2 Unlock Holding Times(s)” to “0”.
- Fixed API cannot open Door2 remotely.
- Fixed cannot end the call by pressing doorbell button if the doorbell schedule not include current time
- Fixed Silent Alarm triggered the GDS3705 side has audio not muting on phone side.
- Fixed Digit Input 1 can only control open door1 when ALMOUT1 set as Open Door.
- Fixed wrong email theme used when testing alarm action.
- Fixed email failed to send out when non-schedule access alarm triggered.
- Fixed anyone knowing the DTMF PIN can open the door remotely if caller is GDS37xx, added the security limitation that only callees in the whitelist can open door remotely.
- Fixed if Hostage Alarm triggered the GDS3705 not sending audio but still sending alarm siren when far side phone pressed keypad to stop the siren.
- Fixed “Keep Door Open” by configured Schedule fail to work when Daylight Saving Time kicked in.
- Fixed pressing doorbell calling the 2nd callee in the list will not ring if the first number user rejected the open door request call (which supposedly should not happen like receptionist should not reject call)
- Fixed and forbidden user to upload custom doorbell ringtone with empty ring.bin audio.
- Fixed issue with decoding DNS (mDNS).
- Fixed Account Active not taking effect on Account1
- Fixed event log the SIP account number displayed incorrectly.
- Fixed no error prompt when saving SIP and RTP port with same number.
- Fixed clicking webUI to make doorbell call only the 1st number will be called.
- Fixed new uploaded certificate will not overwrite the previous certificate file.

ENHANCEMENT

- Synchronized Digit Input Status with GDS3710.
- Enhanced syslog messages and removed unnecessary details from the logs.
- Added sending System Health Alerts via email.
- Removed “SIP Proxy Compatibility Mode” as GDS3705 not support video.
- Added feature to Enable/Disable Web Access.
- Added feature option to configure “No Key Entry Timeout”
- Added feature to use Digits Only as Private PIN.
- Added option to set “schedule” for “Local PIN to Open Door”.
- Added ability to configure “Keep Door Open” action from “Device Config” of GDSManager (Version: 1.0.1.1) and synchronize with GDS37xx, or vice versa from GDS37xx to GDSManager.
- Added option to set DTMF Payload value.
- Added RTCP/TRCP-XR support.
- Added reuse ALMOUT1 for Open Door function and interface.
- Added Digit Output support Normal Open or Normal Close setting.
- Added “Boot Version” displayed in “System Info” of “Status” UI page.

KNOWN ISSUES

- Playing Prompt Audio from Proxy/UCM sometimes distorted.
- Dual Mic function is invalid.
- When doorbell volume set to 0 still hearing the ring back tone.
- Sending repeating registration packets to Server when receiving Terminate/Notify message.
- Silent Alarm to SIP phone still playing siren at phone side not stopping after pressing phone’s keypad. 

About VoIP System Updates:

Firmware updates for VoIP Systems are very complex and usually contain many bug fixes, security improvements and compatibility enhancements, because the base system must be able to connect to webcams, video conference devices and the like.

Upgrading your VoIP System firmware should be done as often as possible to keep your device up to date with new security standards, and improve the native plug and play capabilities of your device.

Although beta firmware are usually full of new and exciting features, updating to them should only be done after thoroughly reading the changelog and making sure that you still retain phone functionality. Remember to check if you can revert to a more stable version as well, in case the new update is not what you were expecting.

If you intend to apply this update, please make sure that the package is compatible with your VoIP System, hit the download button, follow the installation instructions and enjoy. Check out our website as often as possible in order to keep your device “Updated one minute ago.”

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.