Fujifilm X-T5 Camera Firmware 2.00

Changes:

- “SELECT FRAMES” in “TRANSFER IMAGE TO SMARTPHONE” of the Playback menu has been changed to “SELECT IMAGE & TRANSFER”
- The contents of the “SMARTPHONE TRANSFER ORDER” of “Fn1 BUTTON SETTING” in “BUTTON/DIAL SETTING” of setup menu has been changed and “SELECT & SMARTPHONE TRANSFER ORDER” has been added on.
- Other minor bugs have been fixed.

The firmware for each model supports new application software “FUJIFILM XApp” for GFX and X series cameras.
- “FUJIFILM XApp” is the advanced application software for the current one, “FUJIFILM Camera Remote”, with which wireless communication becomes more stable and faster so that images and movies transportation from the camera becomes more smooth and comfortable with the smartphone and tablet terminal.
- Moreover, the operation with the smartphone and tablet terminal becomes much simpler than the current application software, since all the data transportation operations, except for the “Bluetooth Pairing” between camera and the application software required at the first time only, are completed with the smartphone and tablet terminal.
- Adding on the “Live View Mode” and access/download functions of the data in camera, several new functions are available, such as “Backup/Restore” to store the setting data in the shooting and setup menus, “Timeline” to review the shooting information of the camera/lens, shooting count/location, etc. and “Activity” to show the accumulated summary of the shooting count total, film simulation usage, etc., which should make GFX and X series cameras attractive more and more.

Subject detection enhancement by AI (Artificial Intelligence).
(1) Current subject detection function improvement
Subject detection performance has been greatly improved in situations that were difficult to detect with the current firmware, such as “backlighting”, “looking sideways”, and “small subjects”. The subject detection function can be used more than ever, regardless of the scene.
(2) New subject category added “Insect” and “Drone” detection is newly realized In addition to the existing “Face”, “Eyes”, “Animal”, “Bird”, “Automobile”, “Motorcycle & Bike”, “Airplane” and “Train”. Insects can be detected by setting the subject as “Bird” and drones can be done by setting it as “Airplane”.

Dynamic tracking performance enhancement by the improved AF algorithm.
(1) The motion prediction algorithm has been improved to enable stable tracking of subjects moving at high speed in the frame.
(2) The AF focusing speed has been improved when continuous shooting is started by simultaneously pressing the AF-ON button and the release button while the camera is out of focus. The AF starts to focus at a faster rate than before, even in situations where the situation changes moment by moment, such as in sports.
(3) This makes it difficult to miss a shutter release opportunity, even in situations such as sports where the situation changes from moment to moment.

Precautions:

- If firmware updating fails, the camera may no longer operate correctly in some cases.
- Always use the fully-charged battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
- Firmware updating requires approximately 90 seconds.
- Once the firmware has been updated, some data of the previous version cannot be restored.

Installations Instructions:

- Put the formatted memory card to a card reader slot of your PC / Mac.
- Download the firmware
- Copy the downloaded file to the card.
- Take the card from the card reader slot after the copy is completed and put it to the camera.
- Use a fully charged battery. If the camera turns off during the firmware update, it won't work well.
- The time for the firmware update varies depending on the capacity of the firmware, but it is approx. 90 sec. Never turn off the camera and operate it during the firmware update.
- Turn the camera on pressing "DISP/BACK" button to show the display in the right. Then, press the "MENU/OK" button
- After confirming the item as [BODY] to update the camera body, press [OK] button.
- Press the [OK] button to go to next step.
- Press the [UP button] to select "OK".
- Press the [OK] button.
- Firmware updating is started.
- It takes approximately 90 seconds for completing the firmware update.
- When this screen appears, the firmware update has been successfully completed.
- Turn the camera off.
- Check the upgraded firmware.
- By following the above procedure "Firmware version checking procedure", you can see the firmware version.
- Format the card. 

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.