1. Update agent version to 2.1.0-b42
2. Upgrade the OpenSSL version to v1.0.2j
3. Support mydlink UID feature.
4. Support IE Browser with digital zoom in/out function.
5. Support ONVIF v16.01.
1. Fixed Security issue for "TCP Off-Path Vulnerability CVE-2016-5696".
2. Fixed for "mistake in the Helpful Hints about file format"
3. Fixed SSID caused the devices cannot be set properly.
4. Fixed mydlink reported an issue for DCS-2530L that the timestamp of acs header is wrong.
5. Fixed for "The screen didn't refresh after successfully delete recording clip.", modfiy the NIPCA CGI 3.7.5 /config/sdcard_delete.cgi response status.
6. Fixed motion sensitivity cannot be set correctly many times via NIPCA CGI.
7. Fixed "The default value of level bar is incorrect.", modify the default Sound Detection level at 70dB.
8. Modify the /audio/ACAS.cgi default response MU-LAW audio format for DCS-2530L.
9. Modify the memory management that would cause webserver have crash problems, when use mydlink app and request as follow cgi command.
/cgi/admin/adv_snapshot_cont.cgi
/cgi/admin/recorder.cgi
10. Modify the NIPCA time zone id follow spec 1.9.8
11. Solve the camera will broadcast INVALID-XXXX (last four digits of MAC address) problem.
12. Fixed the camera will continue to cycle from day/night mode issue.
13. Fixed the camera setting static IP via Web UI setup wizard does not apply problem.
14. Fixed the IP camera name and label name have a lot of special characters problems.
1. Under Camera direct mode setup flow, it would stop at the Wi-Fi setting step /unable to connect to the router, IF the user has his router's SSID to contain special characters (ex.@#$%^&).
Follow the steps below to upgrade the firmware:
1. Download the latest firmware file from the D-Link website. The file is in .bin file format.
2. Log-in camera web UI and enter setup/Maintenance/Firmware upgrade
3. Click Browse… and specify the firmware file.
4. Click Upgrade.
The camera starts to upgrade and will reboot automatically when the upgrade completes.
- All firmware upgrades should be done over a WIRED connection. If your camera is currently configured wireless, plug it directly into your router before proceeding.
- Do not start or use other applications while upgrading your device’s firmware, and do not hit Stop, Back, or Reload in your web browser during the upgrade process.
Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.
On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.
Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.
As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.
However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.
That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance.
Top 4 Download periodically updates information of D-Link DCS-2530L Rev.A1 IP Camera Firmware 1.01.07 full driver from the manufacturer, but some information may be slightly out-of-date.
Using warez version of D-Link DCS-2530L Rev.A1 IP Camera Firmware 1.01.07 driver is hazardous. Our driver download links are directly from our mirrors or publisher's website, D-Link DCS-2530L Rev.A1 IP Camera Firmware 1.01.07 torrent files or shared files from free file sharing and free upload services, including Rapidshare, HellShare, HotFile, FileServe, MegaUpload, YouSendIt, MailBigFile, DropSend, MediaMax, zUpload, MyOtherDrive, SendSpace, DepositFiles, Letitbit, LeapFile, DivShare or MediaFire, are not allowed!
It is not recommended to download drivers from illegal sites which distribute a keygens, key generators, pirate keys, serial numbers, warez full versions or cracks for D-Link DCS-2530L Rev.A1 IP Camera Firmware 1.01.07. These drivers might corrupt your computer installation or breach your privacy. A driver might contain a trojan horse opening a backdoor on your computer. Hackers can use this backdoor to take control of your computer, copy data from your computer or to use your computer to distribute viruses and spam to other people.
Download Now
Update All Drivers