Atomos Shogun Inferno Recorder Firmware 8.01

Release notes:

Features:

- Now supporting HDR exposure from the following camera log curves:

Fujifilm Log, Sony S-Log and Canon C-Log3.

- Fixed PQ HDR output compatibility issue. Gamma and gamut is now 100% accurate for all gamuts, highlights and blacks.

- Increased precision in blacks when processing HDR from log inputs giving perfect black representation.

Bug Fixes:

- Color mapping to the monitor has now been corrected for Prores

- PQ out will no longer send the HDR info frame when disabled

Firmware Update Tutorial:

- Download and unzip the file.

- Copy the file onto a recommended, formatted driver, using the docking station included with your recorder.

- Insert the drive into the Atomos recorder while it’s off.

- Power up the Atomos recorder.

- The screen will show flashing lines of color. This is normal - DO NOT power off!

- Updating will take a few minutes.

- Once completed, the Atomos recorder will power down.

- Power up the Atomos recorder again.

- Check Menu > Product Info > AtomOS Version. This should match the version you have just downloaded.

- Enjoy your updated Atomos recorder !

Firmware Recovery Tutorial:

- Power down the Atomos recorder (Hold power button for 4 seconds).

- Hold down the power button for 10 seconds approximately.

- You will see the “Firmware Update Failed” screen.

- Insert your HDD / SSD.

- The install process will begin and the screen will show flashing lines of color. This is normal - DO NOT power off !

- Once completed, the Atomos recorder will power down.

- Enjoy your updated Atomos recorder !

About Video Recorder Adapters:

Applying a new firmware package on your Video Recorder adapter should improve overall performance and stability, fix various issues encountered with the device, or add support for newly developed features.

The Video Recorder adapter should be carefully upgraded by a power user (that is to say, someone who has the know-how to successfully complete the process), but it can also be performed by an average user at his or her own risk.

Either way, given the fact that each producer has their own method for installing a new firmware, and that every device has a particular way to enter the update mode, you must not consider upgrading the adapter’s software until you have read and thoroughly understood the installation steps.

As a rule, said steps shouldn’t pose too much of a challenge because manufacturers strive to make them as easy as possible. As with everything else, exceptions do occur, and users should be prepared for them.

Usually, you should transfer the compatible firmware to the Recorder through a USB cable or a memory card, and afterwards enter update mode from the unit’s setup menu or through a specific power-on method.

With this in mind, if you intend to apply this release, make sure the package is compatible with your Video Recorder and that it brings about the changes you want or require; hit the download button and apply the new firmware.

Don’t forget to regularly check with our website so that you don’t miss any updates.