- NOTE: AiCloud has been removed from Asuswrt-Merlin due to its poor security track record. This also includes cloud syncing features such as Asuswebstorage or Dropbox syncing with USB folder. Use a VPN if you need secure remote access to your data.
- UPDATED: Merged GPL 102_40399 (GT-BE19000AI only)
- UPDATED: OpenVPN to 2.6.19.
- UPDATED: Dropbear to 2025.89.
- UPDATED: nettle to 3.10.2.
- UPDATED: dnsmasq to 2.93-test2 (includes a couple of DNSSEC fixes over 2.92)
- UPDATED: openssl-3.0 to 3.0.19 (GT-BE19000AI only)
- UPDATED: tor to 0.4.8.22.
- CHANGED: Added new 2024 DNSSEC trust anchor, which will start being used in October 2026.
- FIXED: IPv6 blocking of DoT servers (dave14305)
- FIXED: Multiple minor CVE for OpenSSL 1.1: CVE-2025-68160, CVE-2025-69418, CVE-2025-69419, CVE-2025-69420, CVE-2025-69421, CVE-2026-22795 and CVE-2026-22796 (backports by RSDNTWK)
- FIXED: Missing UPnP settings on models with multiservice WAN support.
- FIXED: ntpd options missing when operating in WISP mode.
- FIXED: TrendMicro signatures not updating on RT-BE58_Go.
- FIXED: Starting a client through VPNDirector would fail to update routing rules.
- REMOVED: AiCloud support, due to security reasons.
- Uses Chart.js for Realtime and Last24 pages
- Removes legacy Tomato code
- Last 24 can be zoomed in and panned (mouse wheel and pinch-to-zoom gestures are both supported)
- Realtime and Last 24 now show as bits/s instead of bytes/s
- Settings moved from the tab to the dropdown menu
- Removed NVRAM database location option and added JFFS. Also removed rarely used start-of-month setting.
- Simply flash it like any regular update. You should not need to reset to factory defaults (see note below for exceptions). You can revert back to an original Asus firmware at any time just by flashing a firmware downloaded from Asus's website.
- If the firmware upgrade fails, try rebooting your router to free up sufficient memory, without any USB disk plugged in, then try flashing it again.
- If you run into any issue after an upgrade and you haven't done so,try doing a factory default reset as well.
- Always read the changelog, as mandatory resets will be mentionned there when they are necessary.
- In all of these cases, do NOT load a saved copy of your settings! This would be the same thing as NOT resetting at all, as you will simply re-enter any invalid setting you wanted to get rid of. Make sure to create a new backup of your settings after reconfiguring.
- Resetting to factory default after flashing is strongly recommended for the following cases: Updating from a firmware version that is more than 3 releases older or Switching from a Tomato/DD-WRT/OpenWRT firmware
- This custom firmware can be applied like any regular update.
- You should not need to reset to factory defaults.
- You can revert back to an original ASUS firmware at any time.
- Do not load a saved copy of your settings.
Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release.
Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.
In theory, these steps shouldn't be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don't always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.
If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.
If you're looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don't power off the router or use its buttons during the installation, if you wish avoid any malfunctions.
If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don't miss the update that will improve your device.
Top 4 Download periodically updates information of ASUS ZenWiFi Pro XT12 AsusWrt-Merlin Firmware 3006.102.7.0 full driver from the manufacturer, but some information may be slightly out-of-date.
Using warez version of ASUS ZenWiFi Pro XT12 AsusWrt-Merlin Firmware 3006.102.7.0 driver is hazardous. Our driver download links are directly from our mirrors or publisher's website, ASUS ZenWiFi Pro XT12 AsusWrt-Merlin Firmware 3006.102.7.0 torrent files or shared files from free file sharing and free upload services, including Rapidshare, HellShare, HotFile, FileServe, MegaUpload, YouSendIt, MailBigFile, DropSend, MediaMax, zUpload, MyOtherDrive, SendSpace, DepositFiles, Letitbit, LeapFile, DivShare or MediaFire, are not allowed!
It is not recommended to download drivers from illegal sites which distribute a keygens, key generators, pirate keys, serial numbers, warez full versions or cracks for ASUS ZenWiFi Pro XT12 AsusWrt-Merlin Firmware 3006.102.7.0. These drivers might corrupt your computer installation or breach your privacy. A driver might contain a trojan horse opening a backdoor on your computer. Hackers can use this backdoor to take control of your computer, copy data from your computer or to use your computer to distribute viruses and spam to other people.
Download Now
Update All Drivers
