1. Download the latest firmware and save the .zip file.
2. Remove any previous dLive firmware from your USB drive. To do this, look into the USB AllenHeath-dLive folder and delete the existing Firmware folder and also the Firmware.md5 file. Do not delete other files or folders.
3. Extract the .zip file to the root directory of your USB drive. Do not change the folder name or browse inside the Firmware folder as doing this may cause firmware corruption. Attempting to navigate or open files within this directory may cause your Operating System to leave behind small temporary system files which can invalidate your firmware.
4. Safely remove the USB drive from your computer.
5. Connect the dLive Surface to the dLive MixRack via gigaACE or Network. To do this, plug a Cat5 cable between one of the Surface gigaACE/Network ports and one of the MixRack gigaACE/Network ports.
6. Plug the USB drive into the dLive USB port, and touch Update in the Firmware page. The dLive will reboot to a ‘bootloader’ screen and if valid firmware is found on the USB drive then details of the current versions and versions found on the drive will be displayed.
7. Touch the Update button. Do not interrupt this process. Failure to complete the transfer may result in firmware corruption. Make sure the mains power and connecting cables are reliable and that the system will not be disturbed or switched off during the update.
8. When the firmware has been successfully installed, the system will automatically reboot.
9. Once the system is fully booted, recall a Template Show or User Show to restore your settings.
1. Download the latest firmware and save the .zip file.
2. Remove any previous dLive firmware from your hard drive. To do this, look for a AllenHeath-dLive folder and delete the existing Firmware folder and also the Firmware.md5 file. Do not delete other files or folders.
3. Extract the .zip file to a directory on your hard drive. Do not change the folder name or browse inside the Firmware folder as doing this may cause firmware corruption. Attempting to navigate or open files within this directory may cause your Operating System to leave behind small temporary system files which can invalidate your firmware.
4. Open a web browser and type the IP address of the MixRack into the address bar (Default: 192.168.1.70)
5. Select Choose File
6. Select the location where you extracted the firmware and navigate to: AllenHeath-dLiveFirmwareTLD-MixRackFirmware
7. Select Firmware.tar.xz and press Open
8. Select Update
9. Wait for the MixRack to update. Do not interrupt this process. Failure to complete the transfer may result in firmware corruption. Make sure the mains power and connecting cables are reliable and that the system will not be disturbed or switched off during the update.
10. When the firmware has been successfully installed, the MixRack will automatically restart.
11. After the MixRack restarts, the new firmware version will be shown in the browser window
12. Recall a Template Show or User Show to restore your settings.
Updating the mixer's firmware version can add support for newly developed features (or improve existing ones), enhance audio quality and transition effects, resolve different problems such as those regarding various noises heard in certain situations, and many other related improvements.
However, before downloading this package, go to the unit's system information and make sure that the currently installed firmware isn't either newer or matches this release. Moreover, you should know that an update failure might seriously damage the mixer's software, so it is vital that you are familiar with the installation steps.
As for applying this release, you must transfer the downloadable package (or its content) to the mixer via any available methods, and power up the unit through various key combinations in order to enter update mode (make sure you read the product's user guide).
This said, if you consider installing this release and you're positive you have all the knowledge you need for a successful upgrade, download the package, and apply it to your mixer. Check with our website constantly so that you don't miss any update that can improve your device.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Top 4 Download periodically updates information of Allen & Heath dLive C2500 Digital Mixer Firmware 1.52 full driver from the manufacturer, but some information may be slightly out-of-date.
Using warez version of Allen & Heath dLive C2500 Digital Mixer Firmware 1.52 driver is hazardous. Our driver download links are directly from our mirrors or publisher's website, Allen & Heath dLive C2500 Digital Mixer Firmware 1.52 torrent files or shared files from free file sharing and free upload services, including Rapidshare, HellShare, HotFile, FileServe, MegaUpload, YouSendIt, MailBigFile, DropSend, MediaMax, zUpload, MyOtherDrive, SendSpace, DepositFiles, Letitbit, LeapFile, DivShare or MediaFire, are not allowed!
It is not recommended to download drivers from illegal sites which distribute a keygens, key generators, pirate keys, serial numbers, warez full versions or cracks for Allen & Heath dLive C2500 Digital Mixer Firmware 1.52. These drivers might corrupt your computer installation or breach your privacy. A driver might contain a trojan horse opening a backdoor on your computer. Hackers can use this backdoor to take control of your computer, copy data from your computer or to use your computer to distribute viruses and spam to other people.
Download Now
Update All Drivers