Roland AT-300 Music Atelier Firmware 1.26

Update Procedure

Note: Never power-off your AT-300 / AT-100 / AT-75 while the update is in progress!

1. Leaving the power to the AT-300 / AT-100 / AT-75 switched off; connect the USB Memory to the "External Memory connector".

2. Hold down the Rotary Sound [On/Off] and Rotary Sound [Fast/Slow] button and turn on the AT-300 / AT-100 / AT-75. “Updating…” appears on the screen and the update begins. The indicator of the Rotary Sound [On/Off] button will be blinking slowly while updating.

3. When the update completes, the message "Finished." will appear on the display. Then, the indicators of the Rotary Sound's [On/Off] and [Fast/Slow] buttons will be blinking quickly. Turn off the power of AT-300 / AT-100 / AT-75 after confirming the update completion.

* The update takes approximately five minutes.

4. Detach the USB Memory and switch off the power to the unit.

Cautions with the Update

- We recommend that you save your user data to a USB memory before you perform the update. If a problem occurs and your user data is lost, you will be able to restore the original state by reloading the data you saved. For details on the procedure, refer to the following sections of the Owner's Manual.

- Never apply this update data to any product other than the AT-300 / AT100 / AT-75. This update data may destroy the data or system program of other products.

- Never power-off your AT-300 / AT-100 / AT-75 while the update is in progress!

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.

It is highly recommended to always use the most recent driver version available

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games

Try to set a system restore point before installing a device driver

This will help if you installed a wrong driver

Problems can arise when your hardware device is too old or not supported any longer