Kramer VP-730 Presentation Scaler-Switcher Firmware 1.13 Master

The following changes were made in this version:

Fixes:

An issue with some DVD and Blu-ray players (for example Pioneer LX55 Blu-ray player) was fixed:

- Powering on the scalers with an LX55 Blu-ray player selected on HDMI 1 gives the normal information screen. Switching to another source on HDMI 2 gives a correct output. Switching from HDMI 2 back to the player on HDMI 1 gives no signal on the output. Unplugging and replugging the player reconnects it and gives a correct output.

Technical Notes:

- A switching problem with some DVD and Blu-ray players (for example Pioneer LX55 Blu-ray player) connected to HDMI inputs was fixed.

Firmware Upgrade Procedure

1. Acquire xxx.brec file with the required version of firmware.

2. Copy this file to the route directory on any USB readable memory device (disk-on-key, flash memory card etc.).

3. Plug the device with the firmware file into USB connector of the VP728/729 and switch osan the scaler.

4. Wait until the scaler boots up and then use OSD menu to navigate to Setup>Advanced Setup>Misc>Firmware Download

5. Use UP and DOWN arrows to highlight the required firmware file and press ENTER button.

6. Confirm the upgrade and wait until progress indicator gets to 100%.

7. Restart the scaler by recycling the power.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

It is highly recommended to always use the most recent driver version available

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games

Try to set a system restore point before installing a device driver

This will help if you installed a wrong driver

Problems can arise when your hardware device is too old or not supported any longer